Compare commits

..

61 Commits

Author SHA1 Message Date
rustdesk
c2927046f8 port forward: a channel id still live when the counter comes round is skipped
The controller handed out `next_id` unchecked. 2^32 opens later it lands
on a channel still up: the entry here was replaced, while the peer,
which ignores an `open` for a live id, kept routing that id to the old
socket, so the new local connection's bytes went into the old target
connection. The id is now taken under the map's lock and advanced past
any id in use.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 14:29:52 +08:00
rustdesk
c794bee3c5 port forward: a tunnel's TCP stream refuses packets over twice MAX_FRAME
The codec takes a header declaring up to 1 GiB and hands the packet up
only once it has all arrived, so the channel window bounded what the
peer may send, not what this side buffers. Both sides now cap the codec
at 2 * MAX_FRAME as soon as multiplexing is agreed: a data frame with
its envelope and MAC fits with room to spare, and a header over the cap
ends the tunnel before a byte of payload is read. TCP only; the
WebSocket and WebRTC codecs carry caps of their own.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 14:03:41 +08:00
rustdesk
163cdb91b2 Urdu: the two terminal clipboard keys master added
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:47:42 +08:00
rustdesk
de052b2aaf port forward: the connect guard counts a live tunnel as connected
`connect_port_forward_if_needed` returned early only for a raw-pipe
socket; called again with a tunnel up it would have built a second
`PortForwardMux` and dropped every channel of the first. Not reachable
today, since the logon response is sent once, but the other checks in
this change already read `is_port_forward()`.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:40:20 +08:00
rustdesk
89b3f88286 port forward: a channel opened as its tunnel closes still gets the teardown
`open` can straddle `close_all`: the claim passed, the frame receiver was
still alive, and the channel subscribed after the signal had gone out.
`watch::subscribe` marks earlier sends as seen, and the entry sits in a
map that was already cleared, so nothing would ever end it. The signal is
now a level: `close_all` raises it with `send_replace`, which stores even
with no channel live, and `run_channel` waits for the value rather than
for a change.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:40:20 +08:00
rustdesk
7587cf514a port forward: a mapping latched to the raw pipe logs in without asking for the tunnel
The login copied the window's `port_forward_mux` into `multiplex`, so a
mapping that had latched to the raw pipe on an old peer kept asking for
the tunnel. Once that peer was upgraded it answered with a tunnel while
the controller switched to raw framing, and every later connection on
the mapping was dead until it was re-added. The login now carries its
own `port_forward_multiplex`, filled with the target under the turn
lock: the probe asks, the raw pipe does not.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:40:20 +08:00
rustdesk
1bb4db9484 port forward: closing the tunnel reaches channels parked on their socket
A channel whose far end neither reads nor writes has both relays parked
on the socket, not on the inbound queue, so `close_all` dropping the
queue's sender woke neither: the socket and both tasks lived on until
the far end hung up. Both sides now hold a per-tunnel teardown signal
that `run_channel` selects on beside its own cancel, and `close_all`
sends it after clearing the map.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:40:20 +08:00
rustdesk
21b4e04e52 Urdu: drop the keys template.rs no longer lists
The twenty keys removed here are absent from template.rs and from every
other language file; ur.rs was the only one still carrying them, eight
of them with no value at all. They are leftovers of features that are
gone: the plugin menu, the OS-account login prompts, the Xorg and
no-desktop errors.

ur.rs now holds exactly the template's key set, all of it translated.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:40:20 +08:00
rustdesk
c5dd8f1e23 Urdu: fill the backlog of empty and missing translations
ur.rs had fallen behind: 104 keys carried an empty value and 35 keys the
other languages have were absent altogether. Both are filled in, the
missing ones in the order template.rs lists them.

Eight entries stay empty on purpose. They are keys that only ur.rs still
carries, absent from template.rs and from every other language, so their
English source cannot be recovered and nothing reads them:
remember_account_tip, os_account_desk_tip, another_user_login_*_tip,
xorg_not_found_*_tip and no_desktop_*_tip. Twelve more dead keys keep
the values they have; removing either group is a separate decision.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:38:31 +08:00
rustdesk
2a1b1c8cba port forward: the off switch gets a checkbox in Settings → General
`enable-port-forward-mux` was readable only by editing the config file.
It is a local setting of the controlling side, so it sits with the other
outgoing ones, after "Open connection in new tab", with a tooltip saying
what it does.

The two new keys are translated in every language. The three that the
mobile file manager added, "Export", "Export Logs" and "Import Folder",
were empty everywhere but five languages; they are filled in too, and
Korean's "xdp-portal-unavailable" with them.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:37:49 +08:00
rustdesk
1a8c47f541 hbb_common: bump to main with rustdesk/hbb_common#595 merged
840c8ec..f94e3fe is that one merge: the five local settings custom
clients could not preset.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
46a35faf04 port forward: the tunnel's login is the raw pipe's, asked for by a window flag
Master's fix for the shared login slots (#16069) keeps the target and
the challenge in the window's `LoginConfigHandler` and serializes the
mappings' logins with a turn lock, all inside `port_forward.rs`. This
branch had carried a broader shape of the same fix, a `with_port_forward`
on `Interface` and the target and `Hash` as parameters through the login
functions, which every caller had to follow. That is gone: `Interface`,
`Session`, `create_login_msg`, `send_login`, `handle_hash` and
`handle_login_from_ui` are as on master.

What the tunnel needs on top is one bit in the login, `multiplex`. It is
a window flag beside `port_forward` in the handler, set once in `io_loop`
before the window's mappings start, so an accept's claim and its login
read the same value; the setting takes effect for windows opened after
it changes. `connect_and_login_mux` is now master's `connect_and_login`
with the tunnel's three differences and the same `hash_arrived` and
`login_from_ui` calls. The raw pipe is master's, line for line.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
39a388cf50 port forward: a mapping without its hash waits for it before answering the prompt
The window's password prompt is broadcast to every mapping, and can
reach one whose own connection has not received its `Hash` yet. That
mapping used to answer anyway, with a digest over an empty challenge:
the peer refused it and counted a failed attempt, and the empty-salt
result was written into the shared `lc.password`, where the mapping that
prompted had just stored the right one and the next `handle_peer_info`
would persist whatever was there.

The connection's challenge is now `Option<Hash>`, `None` until
`handle_hash` runs, and `handle_login_from_ui` sends nothing without it.
The mapping that prompted stores the salted password in the shared
handler, and the waiting one logs in with that against its own challenge
when its `Hash` arrives, without prompting again.

Test: A answers its prompt, the same broadcast reaches B before its
hash, B sends nothing, B's hash arrives and its login carries B's
challenge and B's target with no dialog. It runs the real `handle_hash`
for B.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
eb404d01f9 port forward: a UI login answers the challenge its own connection was given
`handle_login_from_ui` hashed the typed password against `lc.hash`, the
window's shared handler field, and the window's password prompt is
broadcast to every listener. With two mappings both waiting on that
prompt, the `Hash` that arrived last had overwritten the other's, so
one of the two answered the wrong challenge and failed to log in.
Master shares the same state and broadcasts the same way.

The `Hash` is now a parameter of the login; `Session` keeps it beside
the connection it belongs to, and the per-accept clone that
`with_port_forward` makes gets a slot of its own. `lc.hash` stays for
`handle_peer_info`, which only needs the salt, and that is per peer.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
d52a6647b8 port forward: the raw pipe runs the code it always ran
The multiplexed login had replaced `connect_and_login`, so a mapping
with the setting off, a peer without the feature, or a listener latched
`Legacy` still went through the tunnel's state machine, the capped
pre-read and the changed local-EOF rule. Feature off now means the old
code: `listen()` keeps its accept arm and `connect_and_login` as they
were, and the tunnel is a branch taken only when the setting is on, in
`establish_tunnel` with its own `connect_and_login_mux`. The one line
the raw path does differently is the target riding with the accept's
interface clone instead of the shared handler.

`get_port_forward_mux_enabled` had one caller and moves in here, so
`common.rs` is untouched.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
8376431a19 port forward: the legacy comment names re-adding the mapping only
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
054d863a6a port_forward_mux: pin permission revocation and whole-tunnel failure in tests
Both already hold; the review asked for them to be stated. `enable-tunnel`
turned off mid-session refuses the next `open` while the live channel
keeps relaying, and a dead tunnel ends every channel on it together,
after which the next accept establishes again on the same `Tunnel`.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
0fcba29eb5 port forward: the login's target travels with the accept, not the handler
`listen()` wrote `lc.port_forward` (and, on this branch, `port_forward_mux`)
into the window's shared `LoginConfigHandler` before connecting, and
`create_login_msg` read them back only when the peer's `Hash` arrived.
Two mappings logging in at the same time could therefore swap targets:
on master that bridged a local socket to the wrong target, and with a
tunnel bound to its login's target it also left the mapping refusing
every later accept until it was recreated.

The target is now a `PortForward` carried by the interface clone that
handles one accept, passed explicitly down to `create_login_msg`; the
handler no longer has a field to race on. No lock spans the login.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
b610b9250c port_forward_mux: a window violation drops the channel on the spot
Both demultiplexers only queued a `Violation` and left the entry until
the channel task woke and exited, so a peer that kept sending past the
window queued one more entry per frame in the meantime, bounded by
nothing. The entry now goes the moment `accept` fails; later frames for
that id are unknown-channel noise.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
b0f26aabc3 port forward: the legacy comment names the mapping, not the window
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
c109145c54 port forward: one tunnel per mapping, bound to the authenticated target
The login latches `PortForward.host`/`port` into the session scope and
approval is shown that target, but a window-wide tunnel let any later
`open` name another target with only `enable-tunnel` rechecked. A
tunnel now belongs to one listener and serves the one target its login
authenticated: the controlled side refuses an `open` for any other
target, and a window with several targets uses one connection each,
approved on its own.

With one owner per tunnel the claim needs no waiters: `Establishing`,
`Claim::Wait` and `wait_ready` go, and `try_claim` becomes a plain
read. The CM label that followed a tunnel's targets goes with them; a
row shows its mapping's target, as before.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
babac46999 port_forward_mux: a tunnel ends when its window drops the Tunnel
The loop held its own handle and state sender, so once the window
closed nothing was left to stop it: it kept answering TestDelay and the
peer connection, CM row included, lived on until the peer went away.
`Tunnel` now owns a watch sender nobody sends on; the loop's receiver
errors when the last `Tunnel` drops, and the loop ends.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
5693435f7a server: admit only INITIAL_WINDOW on a channel before opened
The demultiplexer accepted CHANNEL_WINDOW into a pending channel's
unbounded queue, four times the bound the channel task enforces once
it polls. The window now starts at INITIAL_WINDOW and is widened right
before `opened` advertises the rest.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
9c8e5dbb98 hbb_common: bump to main with rustdesk/hbb_common#594 merged
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
18e07563e2 port forward: a legacy window stays legacy until it is reopened
Review: the merged `Claimed | Legacy` arm gave a legacy window a hot
transition to a tunnel — every accept re-negotiated, and a peer upgraded
while the window stayed open was promoted underneath live connections.
The product does not need a mode switch inside a window's lifetime, and
the transition was extra state-machine surface for nothing: reopening
the window picks up an upgraded peer.

The two arms are separate again. `Claimed` negotiates once and the
peer's answer fixes the window's mode. `Legacy` logs in for every accept
as before, asks for no tunnel — `LoginConfigHandler::port_forward_mux`
carries the request per login, so the raw pipe never has to talk to a
peer that thinks it agreed to multiplex — and ignores what the peer
reports. Both arms keep skipping a local socket that hung up during
login.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
fee3efcd8f port forward: apply the whole-branch review
Correctness:
- listen(): the Legacy arm is merged with the Claimed arm. On its own it
  ignored outcome.local_eof, so a client that hung up during login still
  got a target connect, an audit record and a CM row on the controlled
  side, and ignored outcome.mux, so a peer upgraded while a legacy window
  stayed open answered as a tunnel while the controller went raw.
- Refusal dialogs are deduplicated per quiet spell (10 s) rather than per
  tunnel lifetime; the lifetime set went silent for the rest of a
  long-lived window after the first burst.
- Android's CM listener handles UpdatePortForward; it fell into `_ => {}`.
- relay_socket_to_tunnel reads into one scratch buffer per channel and
  sends an exact-size copy. A frame owning its 64 KiB read allocation
  pinned it until sent, once per byte on interactive traffic.

Consistency and cleanups:
- The controlled side's refusal text is the raw pipe's wording, RDP
  substitution included.
- connection.rs: the PortForwardChannel arm is a one-line hook, the CM
  label is pushed from the 1 s tick alone, and the unreachable inner.tx
  fall-through is gone.
- The Ready enum is removed; wait_ready() returns Option<Claim>.
- SendCredit::add wakes with notify_one alone.
- on_ui_command() replaces the two ui_receiver handlers in listen().
- TunnelHandle is no longer re-exported (unused-import warning).

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
de46cac9a7 Use on_error for refused-channel dialog in tunnel_loop
Redirect the refused-channel error through the standard on_error path
instead of calling msgbox directly, for consistency with other errors
in the port-forward flow.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
7b901de8ff port_forward_mux: report a refused channel's reason as an error dialog
The controlled side already answers a refused port-forward channel with
opened { success: false, message }; on the multiplexed path TunnelHandle::
on_frame only logged that message at debug and closed the channel, so the
user saw a closed connection with no explanation, worst on the RDP path
where only the RDP client's own error remained. on_frame now returns the
message the window should show, deduplicated per distinct reason (capped
at MAX_REPORTED_OPEN_ERRORS) so one page load's dozen refused connections
surface one dialog per reason instead of a dozen.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
52baf741fb port_forward_mux: cap send credit and other final review fixes
Fix 1 (critical): clamp SendCredit to MAX_SEND_CREDIT (= CHANNEL_WINDOW)
in both new() and add(), so a peer with tunnel permission can no longer
advertise an unbounded window and force the controlled side's unbounded
FrameSink::Direct sink to buffer unlimited target data per channel.

Fix 2: rename the "starve" test to many_channels_echo_concurrently and
drop its (untrue) starvation claim, since it opens every channel before
the bulk transfer starts. Add a_channel_opened_during_a_bulk_transfer_
is_served_promptly, which opens the small channel while the bulk one is
demonstrably mid-flight.

Fix 3: only look up the tunnel permission for `open` frames in the
PortForwardChannel arm of on_message, instead of once per data frame.

Fix 4: two rustfmt deviations in connection.rs (matches! wrapping and a
tuple literal), fixed by hand without a blanket cargo fmt run.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
66d66bf1a6 port_forward_mux: fix bulk test's premature half-close, pin the half-close limitation
many_channels_echo_concurrently_and_a_bulk_one_does_not_starve_them dropped
its bulk write half as soon as writing finished, which shuts down the write
side of the socket and, by design (see the design doc's TCP half-close
non-goal; today's run_forward does the same), ends the whole channel. Keep
the write half alive until the reader is done so the test measures
starvation, not half-close. Add a_local_half_close_ends_the_whole_channel to
pin that limitation in code.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
85805c41b1 port_forward_mux: end-to-end tests over a loopback tunnel
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
216b1d99e6 port forward: fix round 1 review findings
Drop the mux default-false assignment now that definite-assignment proves
every path that reads it has set it; the enable-port-forward-mux config
commit picks up the missing attribution trailers; the default-on test
pins the enable- prefix itself rather than option2bool's weaker fallback.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
85b1986df4 port forward: share one multiplexed tunnel across a window's listeners
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
0978786c7e port_forward_mux: publish Muxed before spawning the tunnel loop
Publishing after spawn let a loop that dies immediately reset the state
first, so the later publish pinned it at Muxed with a dead handle
forever. Also adds a test pinning open-before-data ordering across many
concurrently opened channels, and drops an unused Clone derive.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
0bf7b0cd26 port_forward_mux: controller tunnel with a single-writer stream loop
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
83933e0242 cm: update a port-forward row's targets as tunnel channels come and go
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
4b708edba6 server: multiplexed port-forward connections stay in the protobuf loop
Wire PortForwardMux into Connection: take the multiplexed path at login
when the controller sets PortForward.multiplex, route
PortForwardChannel frames to it from on_message, sweep the channel
table's targets after open/close, and clean it up on connection close.

Introduce is_port_forward() (socket-based or multiplexed) and use it
at the four sites that classify the connection, so a multiplexed
connection stays in the message loop, gets TestDelay keepalives, and
reports features.port_forward_mux in PeerInfo. The three sites that
break into the raw pipe loop or gate the keepalive still check
port_forward_socket specifically, since a multiplexed connection must
not take that path.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
cc9343e3d3 server: PortForwardMux channel table and per-channel tasks
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
8101bd2303 port_forward_mux: credit-windowed relay halves and channel coordinator
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:13 +08:00
rustdesk
247acc1c97 port_forward_mux: fix RecvWindow counter overflow on long transfers
Replace cumulative accounting (granted/received) with remaining credit
tracking to prevent u32 overflow after 4 GiB of data on a single channel.
Wire behavior is identical, but the fix allows large file transfers
without mid-stream channel closure.

Add regression test for 8 GiB transfer to verify fix.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:12 +08:00
rustdesk
798c8b22ae port_forward_mux: window accounting and channel frame builders
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:12 +08:00
rustdesk
350ad893f8 hbb_common: bump to the port-forward-mux proto
Also latches PortForward.multiplex into login_scope_digest, which
destructures PortForward's fields exhaustively by design (a new field
must be latched or deliberately ignored to compile).

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
2026-09-05 13:36:12 +08:00
fufesou
618bf37deb feat(terminal): add opt-in OSC 52 clipboard writes (#16072)
* feat(terminal): add opt-in OSC 52 clipboard writes

* Remove dup tr

Signed-off-by: fufesou <linlong1266@gmail.com>

---------

Signed-off-by: fufesou <linlong1266@gmail.com>
2026-09-05 13:21:49 +08:00
RustDesk
c1a587cfa4 connection page: the Connect menu offers TCP tunneling, as the peer card does (#16075)
The dropdown beside Connect listed file transfer, camera and terminal
but not port forwarding, so reaching it meant having a card for the
peer. `connect` already takes `isTcpTunneling`; only the menu entry and
the parameter that carries it were missing.

Shown on desktop only. The peer card gates the same entry on `isDesktop`
because `connect` routes a tunnel through the desktop path alone; on web
it would have opened a plain remote session instead.


Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-09-05 01:28:27 +08:00
RustDesk
9a1c8da143 Agents regression surface (#16070)
* AGENTS.md: require a regression-surface check before a change is done

The minimal-invasiveness rules say what to prefer; nothing made an
agent check the final diff against them, so a feature could still route
the old path through its new code while every principle was "followed".
This adds the gate: audit every modified existing path, keep feature-off
on the old code, report the regression surface, and treat an
unnecessarily rewritten legacy path as a review finding whatever the
tests say.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

* AGENTS.md: a scope check before shared code is touched

The minimal-invasiveness rules are principles; this adds the stop
condition that makes them mechanical. A fix for one path stays in that
path, and an unrelated caller needing a placeholder argument to satisfy
a changed signature is the signal that it did not.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-09-04 19:50:43 +08:00
RustDesk
978c901f49 port forward: a login's target and challenge travel with its own accept (#16069)
* port forward: mappings take turns at the window's login slots

A window's mappings log in concurrently, and each login is built from
the shared `LoginConfigHandler`: `create_login_msg` reads
`port_forward`, which `listen()` set before connecting, and
`handle_login_from_ui` reads `hash`, which the last `Hash` to arrive
set. Two mappings logging in at once could swap targets, bridging a
local socket to the other's target, and answer each other's challenge,
failing one login. The window's password prompt is broadcast to every
mapping, so one whose `Hash` had not arrived answered with whatever the
handler held.

Each mapping now fills `port_forward` and `hash` and sends its login
under a per-window turn lock, and keeps its own `Hash` beside the
connection: a password typed before it arrived is left to the mapping
that prompted, which stores the salted password in the shared handler
for the others to log in with.

The fix stays in `port_forward.rs`. `LoginConfigHandler` gains the lock
and a setter for its private `hash`; `Interface`, `Session` and the
login functions keep their signatures.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

* port forward: the lock and the hash setter are crate-private; test the hash that arrives late on its real path

Both exist only so `port_forward.rs` can reach the handler's private
`hash`; neither is API.

The test for a password typed before a connection's hash ended by
answering the prompt again once the hash was there. What happens in the
code is that the hash's arrival runs `handle_hash`, which logs in with
the password the prompting mapping stored; the test now ends there, with
no preset password. Answering the prompt with one's own challenge while
the handler holds another's is a test of its own.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

* port forward: a password typed before the connection's hash answers it when it comes

The previous commit dropped such a password, counting on the mapping
that prompted having stored it in the shared handler by the time this
connection's `Hash` arrived. The broadcast wakes both mappings at once
and `select!` picks between a ready `Hash` and a ready password at
random, so this one could reach `handle_hash` first, find the handler
empty, and prompt again.

The connection keeps the password until its `Hash` arrives and answers
with it then. `login_from_ui` takes the challenge it answers; the wait
is `connect_and_login`'s, in `hash_arrived`.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-09-04 19:39:09 +08:00
RustDesk
d453a19601 AGENTS.md: require a regression-surface check before a change is done (#16068)
The minimal-invasiveness rules say what to prefer; nothing made an
agent check the final diff against them, so a feature could still route
the old path through its new code while every principle was "followed".
This adds the gate: audit every modified existing path, keep feature-off
on the old code, report the regression surface, and treat an
unnecessarily rewritten legacy path as a review finding whatever the
tests say.


Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-09-04 18:31:31 +08:00
RustDesk
50c4e435de connection: apply the non-video send timeout once the type is known (#16063)
* connection: apply the non-video send timeout once the type is known

`Connection::start` set the send timeout before the login request had
arrived, when `file_transfer`, `port_forward_socket` and `terminal` were
all still unset, so every connection got `SEND_TIMEOUT_VIDEO` (12 s) and
the `SEND_TIMEOUT_OTHER` branch never ran. A file transfer, terminal or
port forward whose peer stopped draining for 12 s — a Wi-Fi roam, a VPN
reconnect — was dropped.

The type-specific timeout is now set in `on_message` right after the
login request's union has been matched; `start` keeps the video figure
for the login phase.

`SEND_TIMEOUT_OTHER` also drops from 120 s to 30 s, the same horizon as
the 30 s read timeout: the timeout wraps a single `send`, so it only
fires when the peer makes no progress at all for that long, and beyond
30 s the read check would declare the same peer dead anyway. The raw
port-forward pipe's write to its local target shares the constant and
moves with it.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

* connection: keep the raw port-forward local write at 120 s

`SEND_TIMEOUT_OTHER` also bounded `forward.send` in
`try_port_forward_loop`, the write to the local target, whose own idle
timeout is an hour. Lowering it to 30 s made a target that stops
draining for half a minute drop the whole tunnel. That write gets its
own constant at the value it always had.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

* connection: keep the non-video send timeout at its long-standing 120 s

Lowering `SEND_TIMEOUT_OTHER` to 30 s was a policy change on top of the
bug fix, argued from the 30 s read timeout, which measures something
else and cannot even run while a send is blocked. The constant goes
back to `SEND_TIMEOUT_VIDEO * 10`, where it has been since 2021, and
the raw port-forward loop's local write shares it again. What remains
is the fix alone: the type-specific timeout is chosen once the login
request has said what the connection is.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-09-04 17:12:24 +08:00
fufesou
d5c6d0f6b7 fix(custom client): msi update, preserve exe name (#16057)
Keep the configured app name casing when renaming
the updated executable so legacy MSI custom actions
can terminate custom client processes.

Signed-off-by: fufesou <linlong1266@gmail.com>
2026-09-04 15:49:50 +08:00
Daniel Nylander
b6ff62c74b l10n: fill remaining Swedish entries (#16050)
Signed-off-by: Daniel Nylander <github@danielnylander.se>
2026-09-04 15:26:21 +08:00
fufesou
ba6de7990f fix(ci): ubuntu-22.04-arm, oom (#16056)
Signed-off-by: fufesou <linlong1266@gmail.com>
2026-09-04 15:16:33 +08:00
Joss Gray
a59ad333fc fix: delimit FFmpeg pkg-config option (#16055) 2026-09-04 15:16:00 +08:00
fufesou
82aa28f129 fix(ci): install CMake 4.3 for ARM64 vcpkg builds (#16044)
Signed-off-by: fufesou <linlong1266@gmail.com>
2026-09-03 19:28:54 +08:00
Mariano Abad
3f93005be2 fix(drm): deliver a rotated output upright (#15886) (#15889)
* fix(drm): deliver a rotated output upright instead of sideways (#15886)

the compositor draws a rotated desktop sideways into the landscape
scanout and the physically turned monitor straightens it locally, so the
raw scanout the drm path ships reads sideways in the viewer, and nothing
rebroadcasts on rotation because the framebuffer size never changes.

the capturer now resolves the output transform once per session from the
wayland enumeration, turns accepted frames upright into its own buffer,
and sizes the session in rotated dimensions. the advertised list swaps
width and height for 90/270 outputs, which also makes a mid-session
rotation a topology change that restarts the service, and computes scale
from the post-swap width so a rotated 1:1 monitor no longer advertises
scale 16/9. a non 4-byte format on a rotated session is a hard error and
degrades through the existing health path.

the greeter path where no compositor answers keeps today's behavior:
there is no transform source there. hbb_common carries the new transform
field (submodule bump).

* fix(drm): drop the wayland snapshot when the live layout drifts (#15886)

the advertised list is augmented from the cached wayland snapshot and
nothing invalidated it mid-session, so a rotation the 1.5 s live poll
plainly saw never reached check_changed: the poll reads live, the
advertise kept serving the pre-rotation snapshot. measured before this
commit: transform applied and held, 'desktop layout changed' logged,
zero new encoders. cleared only when the poll saw an actual change, so
the probe cost stays tied to real layout events; after it, the same
stimulus rebuilds into a 1080x1920 encoder within a poll turn.

* refactor: trim comment density to the file norm

* chore: bump hbb_common to the transform field from rustdesk/hbb_common#586

pinned to the #586 commits atop the current pin rather than main tip:
main also carries an unrelated config-keys refactor the app has not
adopted yet, and both #586 commits are reachable upstream through the
merge.

* fix: advertise a lone rotated output at delivered size, one snapshot per session

review findings, both real: the 90/270 swap sat below the origin-only
cut, so a single rotated output advertised unrotated dimensions while
the capturer delivered rotated frames; and transform and origin came
from two get_displays() reads that could straddle a cache invalidation.
the swap now precedes the cut (logical-scale adoption stays multi
output), and new() resolves one snapshot for transform, origin and the
session size, with tests for both. comments trimmed to the three-line
guideline.

* fix(drm): rotate every space the rotation touches, not just the pixels

review findings on #15889, all verified against the code first.

the uinput rect's single-display branches now serve the delivered
orientation, so the pointer reaches the whole of a rotated screen (1).
DisplayRect carries the transform, making 0/180 and 90/270 flips
visible to the drift comparison (5), and the drift poll is an edge on
live-vs-previous rather than a level against the baseline, so the cache
clear fires once per real layout event instead of every 300 ms
forever (9). on the drm path the baseline promotes together with the
clear, so the remap and the client rebase never correct the same origin
delta twice (7), and the poll now runs above the login-screen return,
which was the one place with no other invalidation trigger (6).

a snapshot generation gives a rotation a rebuild path at last (3, 4):
clears bump it, the capturer records it at build, and a stale
generation asks for a rebuild without counting against display health.
the cursor bitmap and hotspot turn with the same session transform the
frames use (11). original_resolution follows the 90/270 swap (12). the
transform comes only from an identity match, never the layout-order
fallback (13), and a missing wayland snapshot at build logs the degrade
instead of silently pinning an unrotated session (10).

unrotate_bgra's body is now libyuv's ARGBRotate, which the existing
direction tests pin to the measured anchor (14). 180 stays master
behavior: i915 advertises hardware rotate-180 and wl_output cannot tell
hardware from software rotation, so undoing it blind would invert an
already-upright frame; it needs the plane rotation property on the
wire (2). the pipewire fallback guard's comment now states the rotated
reality it compares (8).

* fix(drm): one owner for the layout generation, one identity rule for rotation

adversarial pass over the previous commit, three structural findings.

the generation bump rode on the cache clear, which every video-service
start also executes, so any session init or restart tore down every
other live capturer, with no damping against a ping-pong between two
displays. the bump now has a single owner: the edge-detected layout
change in the display-service poll. cache clears are side-effect free
again, and a two-display session survives a third session's init with
zero spurious rebuilds.

the advertise side swapped dimensions for a layout-order-fallback match
while the capturer's transform refused such matches, splitting
advertised size from delivered frames into a black screen. both sides
now key off the same identity-match pass (identity_matches), so a
guessed assignment rotates nothing anywhere.

an edge observed while the drm verdict was transiently non-available
was consumed unpromoted, leaving a rotation sideways for the session;
it now stays owed until the verdict returns. an enumeration that failed
at build pinned transform 0 forever with a warn promising a retry that
did not exist; a missing snapshot now makes the first successful poll
an edge, so the degrade is bounded by the outage. the multi-display
missing-logical-size fallback serves delivered orientation, stale docs
zhou named are updated, and the resolutions list stays mode-space on
purpose: resolution changes ride xrandr, which is inert on this path.

* fix: transpose-tolerant fallback size check, log a rejected rotate geometry

whether a portal stream's caps arrive rotated on a 90/270 output is
unmeasured either way (pipewiresrc does not apply
SPA_META_VideoTransform), and this guard has already broken two readers
who reasoned from its comment - so the size half now accepts either
orientation instead of gambling a permanent offline on one. a source
stride shorter than a row logs the rejected geometry instead of
publishing a silent black frame. comments trimmed to the guideline and
the stale sole-test claim updated.

* fix(wayland): never serve a transposed PipeWire stream

The fallback accepted a stream whose dimensions were the advertised
display's transposed, but CapturerInfo keeps the stream dimensions,
nothing on the wayland side ever reconciles the client afterwards,
and the flutter renderer drops every frame whose size differs from
the advertised display - a permanently blank fallback. Accept only
the exact orientation; a transposed pair now falls into the existing
bail, the display is advertised offline, and the client recovers by
re-enumerating.

* fix(drm): keep the cursor consistent with the session transform

Two holes from the same review pass. The wire cursor id hashes only
the plane pixels and geometry, so a stream rebuilt under a new
transform resent the SAME id and the client's by-id cursor cache kept
the old orientation until the shape itself changed; fold the session
transform into the served id. And a cursor racing new()'s transform
store was processed with transform 0 and never corrected, since the
producer resends only on a shape change; hold that cursor and replay
it once the transform is in - the receive loop wakes at least every
200 ms, so the replay is prompt even on an idle wire.

* fix(wayland): the single-display carve-out must not forgive a transposed stream

The carve-out forgives a size difference (a Full Workspace stream may
report the workspace rather than the mode), but a transposed pair is
the same served-vs-advertised orientation split the previous commit
rejects, and it blanks the client the same way.

* fix(drm): a lone display with a rejected fallback is honestly offline

The transposed rejection promised 'advertised offline', but the
lone-display carve-out in mark_demoted_displays kept the display
online on the grounds that the whole-desktop fallback remains usable
- which is exactly what the rejection just refuted. The video service
then restart-looped against a stream nothing can serve, rebuilding
the portal session about once a second, while the client saw a
display list that lied.

Record the geometry rejection in the display health and let it end
the carve-out; a delivered frame or the demote-cooldown re-arm clears
it, so a recovered output comes back on its own.

* ci: retrigger, the previous run died in the actions outage (all root jobs at exactly 8m)

* fix(drm): a blind capturer owes a rebuild, and name matches reserve globally

Two of the review's findings. A capturer built during a failed wayland
enumeration recorded nothing durable: a later successful enumeration
refills the cache, wayland_snapshot_missing goes false, and the first
live poll sees no edge - the session stays sideways until an unrelated
change. The build now latches that it ran blind and the layout poll
consumes the latch into the existing owed-promotion machinery.

And the identity matcher ran per-connector, so a resolution guess for
an earlier connector could steal a later connector's exact name match
and pin its rotation on the wrong output. Names now reserve in a
global first pass; resolution pairing runs on the remainder only when
forced - one free output and one unmatched connector at that size.

* fix(drm): consume the blind-build latch even on a live-changed poll

Adversarial pass on the previous commit: the short-circuit left the
latch set on exactly the poll where live_changed fired (the common
blind-recovery ordering, since a failed enumeration is not cached and
failed_init makes the first successful poll an edge), and the stale
latch then bought a second, spurious promotion one poll later,
tearing down the freshly rebuilt capturer. The latch is now taken
unconditionally so both edge sources merge into one promotion.

* fix(wayland): hand over a layout change the poll has not seen yet

set_wayland_layout_baseline clears live, which is the edge detector's only
memory of the previous layout. ensure_inited calls it at the top of every video
service start, so a second monitor service starting between a rotation and the
next 1.5s poll recorded the rotated layout as the baseline: the poll then found
baseline == live_rects, owed no promotion, and the first capturer kept its old
transform. Under mutter's software rotation the framebuffer size does not
change and the wayland display-change check is disabled, so the stream stayed
sideways until the next layout event.

The setter now arms the promotion itself when the outgoing live differs from
the incoming baseline, which is the one choke point every caller goes through.
An empty incoming baseline is the DRM-union fallback and proves nothing.

* fix(wayland): the edge detector needs a memory a session init cannot erase

The baseline reset was also the edge detector's memory, so two session inits
straddling a rotation left nothing to compare the next poll against. Keep the
observed layout separate from the per-session input baseline; before the first
poll the outgoing baseline seeds it.

* fix(wayland): a capturer records the layout it was built on

ensure_inited() runs the wayland query before the capturer exists, and a failure
there saves an empty baseline. The capturer's own retry can succeed a moment
later and build on that layout, and because the build was not blind nothing
latched it, so a rotation before the first poll had no memory to be an edge
against and the stream stayed at the old transform.

The build now seeds the edge detector when nothing else has, and only then, so a
capturer built later cannot overwrite what the poll is keeping.

* fix(wayland): keep a capturer record that lost the race with the first poll

The constructor reads its wayland snapshot and records it in the edge
detector in two steps, and the layout poll can land between them. After a
failed session init (empty baseline) the constructor takes layout A and
publishes it, the output rotates, and the poll reads B live: nothing is
recorded yet and the snapshot is present, so it is no edge, and observe()
sets seen=B. The late note_capturer(A) then met a non-empty memory and was
dropped, so the capturer showed A while the detector held B, and B against
B never bumped the generation.

note_capturer now flags a build layout that disagrees with the poll's
memory instead of dropping it (overwriting is still wrong: on a
multi-display session that memory is what the other capturers were built
against). edge() reports the flag as an edge whatever the live layout is,
observe() consumes it right after, and a session init's baseline reset
leaves it alone. Regression test for the interleaving, with the promotion
consuming it, a baseline reset in between, and an agreeing late record as
the control.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011ZwSrP3DFA6ZiPKVHkU5dL

* fix(wayland): a late capturer record from a promoted generation is not a second edge

The record can also land after the poll consumed an edge but before the
bump it promotes, or after the bump with a snapshot taken before it. That
capturer is stale by generation and rebuilds on its own, but the flag it
raised survived the promotion, and the next poll spent a second promotion
on the freshly rebuilt capturers.

Tag the record with the generation the capturer read before taking its
snapshot and count it as an edge only while that generation is current;
the newest generation wins when two records land. Regression test for the
consumed-edge interleaving, with a disagreeing record at the promoted
generation and a stale record after a fresh one as controls.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011ZwSrP3DFA6ZiPKVHkU5dL

* chore: bump hbb_common to main tip

dc95b4f -> 05ed68f, a fast-forward: the flipped-transform warning and the
wlroots xdg-output positions (rustdesk/hbb_common#591, #592), 90-day logs,
the webrtc session cleanup deadlock fix and the hide-general-settings
option. No public API changes and no dependency changes.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011ZwSrP3DFA6ZiPKVHkU5dL

---------

Co-authored-by: rustdesk <71636191+rustdesk@users.noreply.github.com>
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-09-03 17:10:01 +08:00
Xinglin Qiang
23a147b0dc Filter detached DXGI outputs for Win+P single-display modes (#15814)
When Windows is set to "Show only on 1/2", DXGI still enumerates
detached outputs. Preferring that unfiltered list could select a
zero-size display as primary and hang clients waiting for video.
2026-09-03 16:04:09 +08:00
memory_clear
e4539fc304 Update cn.rs (#16041) 2026-09-03 10:08:30 +08:00
Maison da Silva
6dbd810454 Translate export-related strings to Portuguese (#16038)
Translate export-related strings to Portuguese
2026-09-03 08:51:05 +08:00
RustDesk
0fd1a0eecb Custom client no rebuild (#15774)
* feat(portable): load per-customer payload from a PE resource

Customizing a Windows client recompiled the packer for every customer,
because data.bin was baked in with include_bytes!. The generic payload is
identical across customers, so only the small per-customer delta needs to
vary: the branded runner exe, custom.txt and the icons.

The packer now also reads an RDPKG RCDATA resource holding a second blob in
the same format, and folds it over the compiled-in payload. A build can then
inject that resource into a prebuilt template instead of running cargo.

The executable to launch comes from the package trailer, and the extraction
directory follows its stem, which replaces the sed of APP_PREFIX. Where the
executable itself is not customized (sciter x86) it stays in the generic
payload and is only renamed, so the merge covers both shapes.

custom.txt keeps being written to disk next to the app: that is what the
client reads at startup and what the updater stages so a customization
survives an upgrade to a stock build.

Also fixes generate.py restoring os.curdir (the literal ".") instead of the
previous working directory, which left it inside the source folder.

CI: ship windows-aarch64 in the unsigned tarball, so ARM custom clients have
a template to build from.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* ci: publish msi templates for custom client builds

Custom clients rebuild the msi through WiX for every customer, though the
package only differs by the app name, a few GUIDs and four files.

Build the msi once more per release with a __RDAPPNAME__ placeholder and ship
it unsigned in the unsigned tarball, so a customer's build can patch it rather
than run msbuild. It stays unsigned because patching would invalidate a
signature anyway.

Doing this in CI is what makes ARM custom clients possible: preprocess.py runs
the packaged exe to read its version and build date, so an arm64 msi can only
be produced on a native arm64 machine, which the runner already is and the
build agents are not. Patching runs no exe, so an x64 agent can then patch the
arm64 template.

preprocess.py rewrites res/msi in place and locates the app as <app-name>.exe
inside the dist, so the tree is reset around the second build and the dist copy
is renamed to match. Sciter x86 ships no msi and is untouched.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* refactor(msi): pass the app name to the printer custom actions

preprocess.py rewrote the CustomActions sources per customer so the printer
carried the app name, which meant the dll was recompiled for every custom
client and, worse, left the app name baked into a compiled binary.

Pass it through CustomActionData instead. Only the printer and its port ever
varied: the INF path and the driver name ship under their stock names and
preprocess.py already forced the driver name back to RustDesk, so a single
build of the dll now serves every custom client.

Both actions treat the name as optional and fall back to the stock name, so a
package built before this still installs and uninstalls its printer.

This also unblocks patching a prebuilt msi template, which cannot work while a
compiled dll contains the app name: replacing a string inside a PE would shift
everything after it.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* ci: use an 8.3-safe placeholder for the msi template

WiX derives a short name for any name that is not valid 8.3, and a patch
cannot rewrite a truncated placeholder, so a long placeholder would leave the
package's short names pointing at it. RDAPPNAM is eight characters like
"RustDesk" and needs no short name, keeping the template as close to the
shipped package as the mechanism allows.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* feat(msi): give a template its own cabinet for per-customer files

Rebranding recompressed the whole ~100MB payload because one cabinet held
everything. In template mode preprocess.py puts the handful of files a custom
client replaces on a second cabinet, so a patch rebuilds a few hundred KB and
leaves the payload cabinet alone. The shipped msi is built without template
mode and keeps its single cabinet.

The branding assets need conditional components. A stock build ships none of
them -- there is no icon.ico, icon.png or logo*.png, only icon.svg -- so the
template has to carry placeholders for the File rows to exist, and a customer
supplies whichever they want. Installing a placeholder unconditionally would
give a customer with no logo a placeholder image, where today a missing asset
means no logo at all: the client tries each candidate and treats the failure as
absence. So each optional asset installs only when its property says the
customer supplied one.

CI creates those placeholders and builds the template with the new mode.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* ci: build the msi template with a sentinel revision

preprocess.py appends a build-time revision as the fourth version field, so a
template built without one would bake the CI clock into every customer's
package. Revision 0 marks the field as the patcher's to fill in, and makes the
template deterministic.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* fix(portable): delete files a later package no longer carries

The extraction directory is wiped only when the packer's compiled-in timestamp
changes. That used to be per customer, because generate.py ran for each build;
now the packer is compiled once per release, so every customer and every
rebuild within a release share one timestamp and nothing is ever wiped.

A customer who removes their logo and rebuilds would therefore keep showing it:
the new package simply omits logo.png, and md5 skipping only covers files that
are still present. Record the package's paths in the extraction's meta file and
delete the ones a later package drops.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* fix(portable): build the dropped-file path from plain components

meta.toml lives in a user-writable directory and now drives deletion, but the
traversal guard tested the normalised string while the join used the raw one.
Path::join replaces the base outright when handed an absolute path, so an
edited meta.toml could point remove_file anywhere.

The path is now rebuilt from Normal components only. A colon is rejected
explicitly rather than left to the host's parser: a drive-relative "C:x" parses
as a Normal component everywhere, and only a Windows host reads "C:/..." as a
prefix, so the same input escaped when the logic was exercised off-Windows --
which is what the new test catches.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* fix(msi): pass the printer name in a format the custom action can read

[~] is MSI's escape for a NUL character, not the delimiter WcaReadStringFromCaData
splits on -- that is a literal wide char 128, which a Formatted property value
cannot carry -- and WcaGetProperty returns a null-terminated string anyway. So
the second field was unreachable: InstallPrinter always fell back to the stock
name and installed a printer and port called "RustDesk Printer" inside a
customer's branded package, while UninstallPrinter, whose data is a single field
and parsed fine, went looking for "Acme Printer" and left the real one behind
for good.

Both actions now read CustomActionData directly and split on a character that
cannot occur in a Windows path or in a validated app name. A package built
before this carries no separator and keeps the stock name, as it did.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Q7fBdTwziR5BHTkSz7Tzcm

* fix(portable): retry failed stale branding cleanup

Signed-off-by: fufesou <linlong1266@gmail.com>

* fix(portable): reject malformed RDPKG resources

Distinguish an absent customer package from an invalid resource and
propagate package errors instead of launching the stock payload.

Signed-off-by: fufesou <linlong1266@gmail.com>

* refact: format 2 files

Signed-off-by: fufesou <linlong1266@gmail.com>

* fix(msi): match process names case-insensitively during uninstall

Signed-off-by: fufesou <linlong1266@gmail.com>

* fix(custom-client): validate portable exclusion and MSI action data

Fail when --exclude-exe does not match a file, and propagate MSI
CustomActionData read failures while preserving legacy fallback behavior.

Signed-off-by: fufesou <linlong1266@gmail.com>

* fix: generate.py, exclude-exe

Signed-off-by: fufesou <linlong1266@gmail.com>

* Revert "fix: generate.py, exclude-exe"

This reverts commit 5104664e95.

* fix: simple path fix in generate.py

Signed-off-by: fufesou <linlong1266@gmail.com>

* Remove useless comments

Signed-off-by: fufesou <linlong1266@gmail.com>

* fix(portable): remove expect() anyway

Signed-off-by: fufesou <linlong1266@gmail.com>

* fix(portable): validate executable path boundaries

Reject executables outside the source folder and
reuse the package path normalization logic during
stale file cleanup.

Signed-off-by: fufesou <linlong1266@gmail.com>

* fix, remove useless file

Signed-off-by: fufesou <linlong1266@gmail.com>

---------

Signed-off-by: fufesou <linlong1266@gmail.com>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Co-authored-by: fufesou <linlong1266@gmail.com>
2026-09-02 22:14:03 +08:00
Stephan Paternotte
dfb5804dd0 Update nl.rs (#16036)
Re. export and import.
Without detailed information, reference or examples from en.rs, de.rs or fr.rs, I have simply translated the three strings verbatim
2026-09-02 21:49:37 +08:00
21pages
957dfe8c96 feat: add admin and control role API scripts (#16035)
- add admin role CRUD and membership management
  - add non-protobuf control role operations

Signed-off-by: 21pages <sunboeasy@gmail.com>
2026-09-02 21:47:03 +08:00
XLion
c312385ffd Update tw.rs (#16031)
* Update tw.rs

* Update tw.rs

* Update tw.rs
2026-09-02 14:36:49 +08:00
110 changed files with 7815 additions and 3612 deletions

View File

@@ -43,6 +43,7 @@ env:
# https://github.com/rustdesk/rustdesk/actions/runs/14414119794/job/40427970174
# 2. Update the `VCPKG_COMMIT_ID` in `ci.yml` and `playground.yml`.
VCPKG_COMMIT_ID: "9e593bb18ea69cc5095e012465dcd675a822ed0d"
VCPKG_CMAKE_VERSION: "4.3.0"
ARMV7_VCPKG_COMMIT_ID: "6f29f12e82a8293156836ad81cc9bf5af41fe836" # 2025.01.13, got "/opt/artifacts/vcpkg/vcpkg: No such file or directory" with latest version
VERSION: "1.5.0"
NDK_VERSION: "r28c"
@@ -389,6 +390,54 @@ jobs:
mv $msi.FullName ../../SignOutput/rustdesk-${{ env.VERSION }}-${{ matrix.job.arch }}.msi
sha256sum ../../SignOutput/rustdesk-*.msi
- name: Build pre-built MSI template
# Two things this works around: preprocess.py rewrites res/msi in place, so the
# tree is reset around this second variant; and it locates the app as
# <app-name>.exe inside the dist, so the dist copy is renamed to match.
#
# The placeholder is chosen to keep this template as close to the shipped msi as
# possible: eight characters like "RustDesk", and a valid 8.3 name, so WiX
# derives no short name for it. A longer placeholder would get one, and a patch
# cannot rewrite a truncated placeholder, leaving short names pointing at it.
#
# It still has to be unique, which is why "RustDesk" itself cannot be used:
# it also names payload that must never be renamed, such as librustdesk.dll
# and drivers\RustDeskPrinterDriver.
#
#
# Building the arm64 template on the native arm64 runner makes the ARM
# package available: the build agents are x64 and cannot run
# preprocess.py against an ARM exe.
if: env.UPLOAD_ARTIFACT == 'true'
run: |
git checkout -- res/msi
cp -r ./rustdesk ./rustdesk-msi-template
mv ./rustdesk-msi-template/rustdesk.exe ./rustdesk-msi-template/RDAPPNAM.exe
Set-Content -Path ./rustdesk-msi-template/custom.txt -Value 'placeholder' -NoNewline
$assets = './rustdesk-msi-template/data/flutter_assets/assets'
New-Item -ItemType Directory -Force -Path $assets | Out-Null
foreach ($a in 'icon.ico','icon.png','logo.png','logo_light.png','logo_dark.png') {
Set-Content -Path "$assets/$a" -Value 'placeholder' -NoNewline
}
pushd ./res/msi
python preprocess.py --arp --template --revision-version 0 -d ../../rustdesk-msi-template --app-name RDAPPNAM
$msiPlatform = if ('${{ matrix.job.arch }}' -eq 'aarch64') { 'ARM64' } else { 'x64' }
msbuild msi.sln -t:clean -p:Configuration=Release -p:Platform=$msiPlatform
msbuild msi.sln -p:Configuration=Release -p:Platform=$msiPlatform /p:TargetVersion=Windows10
$msi = Get-ChildItem ./Package/bin/*/Release/en-us/Package.msi | Select-Object -First 1
popd
mkdir ./msi-template
mv $msi.FullName ./msi-template/rustdesk-template-${{ matrix.job.arch }}.msi
git checkout -- res/msi
rm -r -fo ./rustdesk-msi-template
- name: Upload unsigned msi template
if: env.UPLOAD_ARTIFACT == 'true'
uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
with:
name: rustdesk-unsigned-msi-template-${{ matrix.job.arch }}
path: ./msi-template
- name: Sign rustdesk self-extracted file
if: env.UPLOAD_ARTIFACT == 'true' && env.SIGN_BASE_URL != '-2'
shell: bash
@@ -925,15 +974,33 @@ jobs:
name: rustdesk-unsigned-windows-x86_64
path: ./windows-x86_64/
- name: Download Artifacts
uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
with:
name: rustdesk-unsigned-windows-aarch64
path: ./windows-aarch64/
- name: Download Artifacts
uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
with:
name: rustdesk-unsigned-windows-x86
path: ./windows-x86/
- name: Download Artifacts
uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
with:
name: rustdesk-unsigned-msi-template-x86_64
path: ./msi-template/
- name: Download Artifacts
uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
with:
name: rustdesk-unsigned-msi-template-aarch64
path: ./msi-template/
- name: Combine unsigned app
run: |
tar czf rustdesk-${{ env.VERSION }}-unsigned.tar.gz *.dmg windows-x86_64 windows-x86
tar czf rustdesk-${{ env.VERSION }}-unsigned.tar.gz *.dmg windows-x86_64 windows-aarch64 windows-x86 msi-template
- name: Publish unsigned app
uses: softprops/action-gh-release@de2c0eb89ae2a093876385947365aca7b0e5f844 # v1
@@ -1470,7 +1537,6 @@ jobs:
submodules: recursive
- name: Set Swap Space
if: ${{ matrix.job.arch == 'x86_64' }}
uses: pierotofy/set-swap-space@49819abfb41bd9b44fb781159c033dba90353a7c # v1.0
with:
swap-size-gb: 12
@@ -1505,6 +1571,15 @@ jobs:
name: bridge-artifact
path: ./
# vcpkg 2026.07.29's SPDX scripts require CMake 4.3+, but this ARM64 runner selects CMake 3.31.
- name: Install CMake for vcpkg on Linux ARM64
if: matrix.job.arch == 'aarch64' && env.UPLOAD_ARTIFACT == 'true'
run: |
python3 -m pip install --user "cmake==${VCPKG_CMAKE_VERSION}"
user_base="$(python3 -m site --user-base)"
"${user_base}/bin/cmake" --version
echo "${user_base}/bin" >> "${GITHUB_PATH}"
- name: Setup vcpkg with Github Actions binary cache
if: matrix.job.arch == 'x86_64' || env.UPLOAD_ARTIFACT == 'true'
uses: lukka/run-vcpkg@b1a0dd252f06b9e25b3c022a9a03bd7a427fb6a2 # v11
@@ -2075,6 +2150,12 @@ jobs:
echo "Modified vcpkg.json for armv7 build:"
grep -A 2 -B 2 '"baseline"' vcpkg.json
- name: Set Swap Space
if: matrix.job.arch == 'armv7'
uses: pierotofy/set-swap-space@49819abfb41bd9b44fb781159c033dba90353a7c # v1.0
with:
swap-size-gb: 12
- name: Free Space
run: |
df -h

View File

@@ -74,6 +74,25 @@
* Accept a little duplication over a restructure. A new function that repeats a few lines of an existing one is a better diff than reshaping the original so both can share it.
* Put new logic in self-contained functions in the module it belongs to (platform-specific logic in `src/platform/`, with `use` inside the function body to avoid churning shared import blocks). Call sites in shared files (`src/tray.rs`, `src/core_main.rs`, `src/server/connection.rs`, …) should be thin one-line hooks.
### Scope check before touching shared code
* Before changing a shared trait, a shared struct, or the signature of a widely used function, check whether the bug or feature is specific to one path. If it is, keep the change inside that path unless that is impossible, and say in the PR why it was.
* If an unrelated caller needs `Default::default()`, `None`, or another placeholder solely to satisfy a signature you changed, the diff is too broad: stop and redesign.
* The expected shape of a fix is a new function in the feature's own module, plus at most a new field or a thin hook in the shared code it needs. Feature-specific state belongs beside the feature's existing state, not in a new abstraction every caller has to learn.
### Mandatory regression-surface check
Before considering any implementation complete, perform a minimization pass over the final diff.
* Inspect every modified existing file and every modified existing code path. Each must be strictly necessary for the requested change. Revert changes that are merely cleanup, refactoring, consistency improvements, or fixes for pre-existing issues.
* For new features, preserve the existing implementation path when the feature is disabled or unsupported whenever practical. `feature off` should run the old code, not a rewritten equivalent.
* Do not route existing behavior through a new abstraction merely to share code with the new feature. Prefer a parallel new function or a small amount of duplication over changing a proven existing path.
* Keep new implementation logic in new or feature-specific modules. Changes to shared/core files should normally be thin hooks, capability checks, or protocol plumbing.
* Do not fix unrelated pre-existing bugs in the same PR. Put them in a separate change unless they directly block correctness or security of the requested work.
* For submodule bumps, inspect the exact commit range and ensure unrelated changes are not being pulled into the parent PR.
* Before finalizing, explicitly report the regression surface: list the existing files and existing runtime paths whose behavior changed, and explain why each change is unavoidable.
* During review, treat an unnecessarily modified legacy path as a review finding even if tests pass and the rewritten behavior appears equivalent.
## Reviewing a PR
* Review only what the diff introduces. Verify ownership with `gh pr diff` before reporting a finding — if the offending lines are untouched context, it is a pre-existing problem, not this PR's.

298
Cargo.lock generated
View File

@@ -753,6 +753,24 @@ dependencies = [
"syn 2.0.98",
]
[[package]]
name = "bindgen"
version = "0.71.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "5f58bf3d7db68cfbac37cfc485a8d711e87e064c3d0fe0435b92f7a407f9d6b3"
dependencies = [
"bitflags 2.9.1",
"cexpr",
"clang-sys",
"itertools 0.12.1",
"proc-macro2 1.0.93",
"quote 1.0.36",
"regex",
"rustc-hash 2.1.1",
"shlex",
"syn 2.0.98",
]
[[package]]
name = "bindgen"
version = "0.72.1"
@@ -1143,6 +1161,30 @@ version = "0.2.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "613afe47fcd5fac7ccf1db93babcb082c5994d996f20b8b159f2ad1658eb5724"
[[package]]
name = "chacha20"
version = "0.9.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "c3613f74bd2eac03dad61bd53dbe620703d4371614fe0bc3b9f04dd36fe4e818"
dependencies = [
"cfg-if 1.0.0",
"cipher",
"cpufeatures",
]
[[package]]
name = "chacha20poly1305"
version = "0.10.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "10cd79432192d1c0f4e1a0fef9527696cc039165d729fb41b3f4f4f354c2dc35"
dependencies = [
"aead",
"chacha20",
"cipher",
"poly1305",
"zeroize",
]
[[package]]
name = "chrono"
version = "0.4.41"
@@ -1192,6 +1234,7 @@ checksum = "773f3b9af64447d2ce9850330c473515014aa235e6a783b02db81ff39e4a3dad"
dependencies = [
"crypto-common",
"inout",
"zeroize",
]
[[package]]
@@ -2281,7 +2324,7 @@ version = "0.5.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "330c60081dcc4c72131f8eb70510f1ac07223e5d4163db481a04a0befcffa412"
dependencies = [
"libloading 0.7.4",
"libloading 0.8.4",
]
[[package]]
@@ -2399,6 +2442,42 @@ dependencies = [
"linux-raw-sys 0.6.5",
]
[[package]]
name = "dtls"
version = "0.13.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "f531dd7c181beaf3cebab3716afa4d0d41ab888be85232583f56bbaf07ca208a"
dependencies = [
"aes",
"aes-gcm",
"async-trait",
"bincode",
"byteorder",
"cbc",
"ccm",
"chacha20poly1305",
"der-parser",
"hmac",
"log",
"p256",
"p384",
"portable-atomic",
"rand 0.9.2",
"rand_core 0.6.4",
"rcgen",
"ring",
"rustls",
"sec1",
"serde 1.0.228",
"sha1",
"sha2",
"thiserror 1.0.61",
"tokio",
"webrtc-util",
"x25519-dalek",
"x509-parser",
]
[[package]]
name = "dtoa"
version = "0.4.8"
@@ -2784,7 +2863,7 @@ dependencies = [
"is-terminal",
"lazy_static",
"log",
"nu-ansi-term",
"nu-ansi-term 0.49.0",
"regex",
"thiserror 1.0.61",
]
@@ -4098,15 +4177,16 @@ dependencies = [
[[package]]
name = "interceptor"
version = "0.14.0"
version = "0.15.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "1ac0781c825d602095113772e389ef0607afcb869ae0e68a590d8e0799cdcef8"
checksum = "ea51375727680dc15f06e8ad90fa31df75d79dd030100e8ad60eef1c27fe2c98"
dependencies = [
"async-trait",
"bytes",
"futures",
"log",
"portable-atomic",
"rand 0.8.5",
"rand 0.9.2",
"rtcp",
"rtp",
"thiserror 1.0.61",
@@ -4258,11 +4338,11 @@ dependencies = [
[[package]]
name = "kcp-sys"
version = "0.1.0"
source = "git+https://github.com/rustdesk-org/kcp-sys?branch=rustdesk-patches#023a0065398968989f2ddfcf5cc72bb886d02675"
source = "git+https://github.com/rustdesk-org/kcp-sys#32a6c09fc6223f54aea83981a6aa8995931d29be"
dependencies = [
"anyhow",
"auto_impl",
"bindgen 0.72.1",
"bindgen 0.71.1",
"bitflags 2.9.1",
"bytes",
"cc",
@@ -4273,6 +4353,8 @@ dependencies = [
"thiserror 2.0.17",
"tokio",
"tokio-util",
"tracing",
"tracing-subscriber",
"zerocopy 0.7.34",
]
@@ -4406,7 +4488,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "e310b3a6b5907f99202fcdb4960ff45b93735d7c7d96b760fcff8db2dc0e103d"
dependencies = [
"cfg-if 1.0.0",
"windows-targets 0.48.5",
"windows-targets 0.52.6",
]
[[package]]
@@ -5128,6 +5210,16 @@ dependencies = [
"winapi 0.3.9",
]
[[package]]
name = "nu-ansi-term"
version = "0.46.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "77a8165726e8236064dbb45459242600304b42a5ea24ee2948e18e023bf7ba84"
dependencies = [
"overload",
"winapi 0.3.9",
]
[[package]]
name = "nu-ansi-term"
version = "0.49.0"
@@ -5791,6 +5883,12 @@ dependencies = [
"serde_json 1.0.118",
]
[[package]]
name = "overload"
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "b15813163c1d831bf4a13c3610c05c0d03b39feb07f7e09fa234dac9b15aaf39"
[[package]]
name = "owned_ttf_parser"
version = "0.25.1"
@@ -6179,6 +6277,17 @@ dependencies = [
"windows-sys 0.52.0",
]
[[package]]
name = "poly1305"
version = "0.8.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "8159bd90725d2df49889a078b54f4f79e87f1f8a8444194cdca81d38f5393abf"
dependencies = [
"cpufeatures",
"opaque-debug",
"universal-hash",
]
[[package]]
name = "polyval"
version = "0.6.2"
@@ -6985,9 +7094,9 @@ dependencies = [
[[package]]
name = "rtcp"
version = "0.13.0"
version = "0.14.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "e9689528bf3a9eb311fd938d05516dd546412f9ce4fffc8acfc1db27cc3dbf72"
checksum = "81d30d1c4091644431c22acf9f8be6191b56805e0e977f15ca7104b4a6d6eaec"
dependencies = [
"bytes",
"thiserror 1.0.61",
@@ -6996,14 +7105,14 @@ dependencies = [
[[package]]
name = "rtp"
version = "0.13.0"
version = "0.14.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "c54733451a67d76caf9caa07a7a2cec6871ea9dda92a7847f98063d459200f4b"
checksum = "2f126f38ea84c02480e32e547c1459a939052f74fb92117ac3eef23fdac6b023"
dependencies = [
"bytes",
"memchr",
"portable-atomic",
"rand 0.8.5",
"rand 0.9.2",
"serde 1.0.228",
"thiserror 1.0.61",
"webrtc-util",
@@ -7438,11 +7547,11 @@ dependencies = [
[[package]]
name = "sdp"
version = "0.8.0"
version = "0.10.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "4cd277015eada44a0bb810a4b84d3bf6e810573fa62fb442f457edf6a1087a69"
checksum = "32c374dceda16965d541c8800ce9cc4e1c14acfd661ddf7952feeedc3411e5c6"
dependencies = [
"rand 0.8.5",
"rand 0.9.2",
"substring",
"thiserror 1.0.61",
"url",
@@ -7672,6 +7781,15 @@ dependencies = [
"tzdb 0.5.10",
]
[[package]]
name = "sharded-slab"
version = "0.1.7"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "f40ca3c46823713e0d4209592e8d6e826aa57e928f09752619fc696c499637f6"
dependencies = [
"lazy_static",
]
[[package]]
name = "shared_library"
version = "0.1.9"
@@ -8011,15 +8129,15 @@ dependencies = [
[[package]]
name = "stun"
version = "0.8.0"
version = "0.9.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7dbc2bab375524093c143dc362a03fb6a1fb79e938391cdb21665688f88a088a"
checksum = "1a512c5d501e3e3b5a4bb3e8e31462d56d54a66b95a28b8596e14422bf21c32b"
dependencies = [
"base64 0.22.1",
"crc",
"lazy_static",
"md-5",
"rand 0.8.5",
"rand 0.9.2",
"ring",
"subtle",
"thiserror 1.0.61",
@@ -8401,6 +8519,16 @@ dependencies = [
"syn 2.0.98",
]
[[package]]
name = "thread_local"
version = "1.1.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "8b9ef9bad013ada3808854ceac7b46812a6465ba368859a37e2100283d2d719c"
dependencies = [
"cfg-if 1.0.0",
"once_cell",
]
[[package]]
name = "threadpool"
version = "1.8.1"
@@ -8780,6 +8908,32 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "b9d12581f227e93f094d3af2ae690a574abb8a2b9b7a96e7cfe9647b2b617678"
dependencies = [
"once_cell",
"valuable",
]
[[package]]
name = "tracing-log"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ee855f1f400bd0e5c02d150ae5de3840039a3f54b025156404e34c23c03f47c3"
dependencies = [
"log",
"once_cell",
"tracing-core",
]
[[package]]
name = "tracing-subscriber"
version = "0.3.19"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "e8189decb5ac0fa7bc8b96b7cb9b2701d60d48805aca84a238004d665fcc4008"
dependencies = [
"nu-ansi-term 0.46.0",
"sharded-slab",
"smallvec",
"thread_local",
"tracing-core",
"tracing-log",
]
[[package]]
@@ -8894,9 +9048,9 @@ dependencies = [
[[package]]
name = "turn"
version = "0.10.0"
version = "0.11.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "3f5aea1116456e1da71c45586b87c72e3b43164fbf435eb93ff6aa475416a9a4"
checksum = "5ed995882f66ab94238de77c62e5e778389698ab700afa4696f4754da8f457cb"
dependencies = [
"async-trait",
"base64 0.22.1",
@@ -8904,7 +9058,7 @@ dependencies = [
"log",
"md-5",
"portable-atomic",
"rand 0.8.5",
"rand 0.9.2",
"ring",
"stun",
"thiserror 1.0.61",
@@ -9030,6 +9184,12 @@ dependencies = [
"unic-common",
]
[[package]]
name = "unicase"
version = "2.8.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "75b844d17643ee918803943289730bec8aac480150456169e647ed0b576ba539"
[[package]]
name = "unicode-bidi"
version = "0.3.15"
@@ -9175,6 +9335,12 @@ dependencies = [
"bindgen 0.65.1",
]
[[package]]
name = "valuable"
version = "0.1.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ba73ea9cf16a25df0c8caa16c51acb937d5712a8429db78a3ee29d5dcacd3a65"
[[package]]
name = "vcpkg"
version = "0.2.15"
@@ -9558,26 +9724,25 @@ dependencies = [
[[package]]
name = "webrtc"
version = "0.13.0"
version = "0.14.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "24bab7195998d605c862772f90a452ba655b90a2f463c850ac032038890e367a"
checksum = "08fd686c0920ac08f3a57eacc48e31f0e4ca1ffefba4478784606f78c14e83ad"
dependencies = [
"arc-swap",
"async-trait",
"bytes",
"cfg-if 1.0.0",
"dtls",
"hex",
"interceptor",
"lazy_static",
"log",
"portable-atomic",
"rand 0.8.5",
"rand 0.9.2",
"rcgen",
"regex",
"ring",
"rtcp",
"rtp",
"rustls",
"sdp",
"serde 1.0.228",
"serde_json 1.0.118",
@@ -9585,13 +9750,12 @@ dependencies = [
"smol_str",
"stun",
"thiserror 1.0.61",
"time 0.3.36",
"tokio",
"turn",
"unicase",
"url",
"waitgroup",
"webrtc-data",
"webrtc-dtls",
"webrtc-ice",
"webrtc-mdns",
"webrtc-media",
@@ -9602,9 +9766,9 @@ dependencies = [
[[package]]
name = "webrtc-data"
version = "0.11.0"
version = "0.12.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "4e97b932854da633a767eff0cc805425a2222fc6481e96f463e57b015d949d1d"
checksum = "062a5438d63bb0756a221693d76cc0dd6119affee1dfdfe57abe3a2a8c8b3eea"
dependencies = [
"bytes",
"log",
@@ -9615,55 +9779,18 @@ dependencies = [
"webrtc-util",
]
[[package]]
name = "webrtc-dtls"
version = "0.12.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "5ccbe4d9049390ab52695c3646c1395c877e16c15fb05d3bda8eee0c7351711c"
dependencies = [
"aes",
"aes-gcm",
"async-trait",
"bincode",
"byteorder",
"cbc",
"ccm",
"der-parser",
"hkdf",
"hmac",
"log",
"p256",
"p384",
"portable-atomic",
"rand 0.8.5",
"rand_core 0.6.4",
"rcgen",
"ring",
"rustls",
"sec1",
"serde 1.0.228",
"sha1",
"sha2",
"subtle",
"thiserror 1.0.61",
"tokio",
"webrtc-util",
"x25519-dalek",
"x509-parser",
]
[[package]]
name = "webrtc-ice"
version = "0.13.0"
version = "0.14.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "eb51bde0d790f109a15bfe4d04f1b56fb51d567da231643cb3f21bb74d678997"
checksum = "69cb13fd1a373e68addc4bba0c8ca058627518e54342583d024bdcbb8ae5d97d"
dependencies = [
"arc-swap",
"async-trait",
"crc",
"log",
"portable-atomic",
"rand 0.8.5",
"rand 0.9.2",
"serde 1.0.228",
"serde_json 1.0.118",
"stun",
@@ -9679,9 +9806,9 @@ dependencies = [
[[package]]
name = "webrtc-mdns"
version = "0.9.0"
version = "0.10.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "979cc85259c53b7b620803509d10d35e2546fa505d228850cbe3f08765ea6ea8"
checksum = "a17279a067e75df72ce923fdeb7f04cd808f6f5aa4910dc6bcb4fbe66b396ace"
dependencies = [
"log",
"socket2 0.5.10",
@@ -9692,21 +9819,22 @@ dependencies = [
[[package]]
name = "webrtc-media"
version = "0.10.0"
version = "0.11.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "80041211deccda758a3e19aa93d6b10bc1d37c9183b519054b40a83691d13810"
checksum = "94a84c910fec0848fd5a0d8a5651e0ddbdedaf25a7d3ae3f0b15f71ac73a1773"
dependencies = [
"byteorder",
"bytes",
"rand 0.8.5",
"rand 0.9.2",
"rtp",
"thiserror 1.0.61",
]
[[package]]
name = "webrtc-sctp"
version = "0.12.0"
source = "git+https://github.com/rustdesk-org/webrtc?rev=825a0a4862818f74406d8e1cc25be72259228235#825a0a4862818f74406d8e1cc25be72259228235"
version = "0.13.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "f985465467d8910c1f8ac4382cd64f83b1f6a1a75021a82b221546f6fb3b856f"
dependencies = [
"arc-swap",
"async-trait",
@@ -9714,7 +9842,7 @@ dependencies = [
"crc",
"log",
"portable-atomic",
"rand 0.8.5",
"rand 0.9.2",
"thiserror 1.0.61",
"tokio",
"webrtc-util",
@@ -9722,9 +9850,9 @@ dependencies = [
[[package]]
name = "webrtc-srtp"
version = "0.15.0"
version = "0.16.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "01e773f79b09b057ffbda6b03fe7b43403b012a240cf8d05d630674c3723b5bb"
checksum = "66d8cdc33413f1d0192670a80ce93d17cb78d57fe3a2414be30d6f6dff121123"
dependencies = [
"aead",
"aes",
@@ -9745,19 +9873,19 @@ dependencies = [
[[package]]
name = "webrtc-util"
version = "0.11.0"
source = "git+https://github.com/rustdesk-org/webrtc?rev=825a0a4862818f74406d8e1cc25be72259228235#825a0a4862818f74406d8e1cc25be72259228235"
version = "0.12.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "d1c0c7e0c8f280f2bbfae442701465777ac07adaf46ce0c5863cd58e13fe472a"
dependencies = [
"async-trait",
"bitflags 1.3.2",
"bytes",
"ipnet",
"lazy_static",
"libc",
"log",
"nix 0.26.4",
"portable-atomic",
"rand 0.8.5",
"rand 0.9.2",
"thiserror 1.0.61",
"tokio",
"winapi 0.3.9",

View File

@@ -52,7 +52,7 @@ screencapturekit = ["cpal/screencapturekit"]
[dependencies]
async-trait = "0.1"
scrap = { path = "libs/scrap", features = ["wayland"] }
hbb_common = { path = "libs/hbb_common", features = ["webrtc"] }
hbb_common = { path = "libs/hbb_common" }
serde_derive = "1.0"
serde = "1.0"
serde_json = "1.0"
@@ -83,7 +83,7 @@ fon = "0.6"
shutdown_hooks = "0.1"
totp-rs = { version = "5.4", default-features = false, features = ["gen_secret", "otpauth"] }
stunclient = "0.4"
kcp-sys= { git = "https://github.com/rustdesk-org/kcp-sys", branch = "rustdesk-patches" }
kcp-sys= { git = "https://github.com/rustdesk-org/kcp-sys"}
reqwest = { version = "0.12", features = ["blocking", "socks", "json", "native-tls", "rustls-tls", "rustls-tls-native-roots", "gzip", "zstd"], default-features=false }
[target.'cfg(not(target_os = "linux"))'.dependencies]
@@ -215,16 +215,6 @@ exclude = ["vdi/host"]
# This allows building and running on systems without libxdo installed (e.g., Wayland-only)
[patch.crates-io]
libxdo-sys = { path = "libs/libxdo-sys-stub" }
# One branch off upstream v0.13.0, the tag whose crate versions match this stack.
# webrtc-util: reads the Windows adapter list's IPv6 addresses as host-order u16 groups, so every
# one comes out byte-swapped, fails to bind, and ICE gathers no IPv6 host candidate on Windows.
# webrtc-sctp: RFC 4960's 1s RTO floor makes a single loss cost 1-3s on a link whose RTT is 24-64ms,
# and fast retransmit cannot cover a request/response exchange; INITIAL_MTU 1228 also fragments on
# IPv6; and its AIMD pins a lossy long-haul link to MSS/(RTT*sqrt(p)), so a switch sends without
# a congestion window, as KCP does - on by default, `allow-webrtc-congestion-control` opts back in.
# Pinned by rev, not branch: a fork branch can be rewritten out from under the lockfile.
webrtc-util = { git = "https://github.com/rustdesk-org/webrtc", rev = "825a0a4862818f74406d8e1cc25be72259228235" }
webrtc-sctp = { git = "https://github.com/rustdesk-org/webrtc", rev = "825a0a4862818f74406d8e1cc25be72259228235" }
[package.metadata.winres]
LegalCopyright = "Copyright © 2026 Purslane Tech Pte. Ltd. All rights reserved."

View File

@@ -43,15 +43,6 @@ fn build_manifest() {
}
}
// bionic only exports getifaddrs()/freeifaddrs() from API 24, while the jniLibs
// are built against the API 21 sysroot (flutter/ndk_*.sh). webrtc-util calls
// them, so without this the android link fails on undefined symbols.
fn build_android_ifaddrs() {
let file = "src/platform/android_ifaddrs.c";
cc::Build::new().file(file).compile("android_ifaddrs");
println!("cargo:rerun-if-changed={}", file);
}
fn install_android_deps() {
let target_os = std::env::var("CARGO_CFG_TARGET_OS").unwrap();
if target_os != "android" {
@@ -98,8 +89,5 @@ fn main() {
build_mac();
println!("cargo:rustc-link-lib=framework=ApplicationServices");
}
if target_os == "android" {
build_android_ifaddrs();
}
println!("cargo:rerun-if-changed=build.rs");
}

View File

@@ -1633,8 +1633,7 @@ String bool2option(String option, bool b) {
String res;
if (option.startsWith('enable-') &&
option != kOptionEnableUdpPunch &&
option != kOptionEnableIpv6Punch &&
option != kOptionEnableWebrtc) {
option != kOptionEnableIpv6Punch) {
res = b ? defaultOptionYes : 'N';
} else if (option.startsWith('allow-') ||
option == kOptionStopService ||

View File

@@ -244,11 +244,38 @@ List<(String, String)> otherDefaultSettings() {
kKeyUseAllMyDisplaysForTheRemoteSession
),
('Keep terminal sessions on disconnect', kOptionTerminalPersistent),
(
'Allow terminal apps to copy to clipboard',
kOptionAllowTerminalClipboardWrite
),
];
return v;
}
String getOtherDefaultSettingOption(String key) {
if (key == kOptionAllowTerminalClipboardWrite) {
return bind.mainGetLocalOption(key: key);
}
return bind.mainGetUserDefaultOption(key: key);
}
Future<void> setOtherDefaultSettingOption(String key, String value) {
if (key == kOptionAllowTerminalClipboardWrite) {
return bind.mainSetLocalOption(
key: key,
value: value == kTerminalClipboardWriteAllowed
? kTerminalClipboardWriteAllowed
: kTerminalClipboardWriteDenied,
);
}
return bind.mainSetUserDefaultOption(key: key, value: value);
}
bool isOtherDefaultSettingReadOnly(String key) =>
isOptionFixed(key) ||
(key == kOptionAllowTerminalClipboardWrite && bind.isDisableSettings());
class TrackpadSpeedWidget extends StatefulWidget {
final SimpleWrapper<int> value;
// If null, no debouncer will be applied.

View File

@@ -115,6 +115,11 @@ const String kOptionEnableAudio = "enable-audio";
const String kOptionEnableCamera = "enable-camera";
const String kOptionEnableTerminal = "enable-terminal";
const String kOptionTerminalPersistent = "terminal-persistent";
const String kOptionAllowTerminalClipboardWrite =
"allow-terminal-clipboard-write";
const String kTerminalClipboardWriteUnconfigured = "";
const String kTerminalClipboardWriteAllowed = "Y";
const String kTerminalClipboardWriteDenied = "N";
const String kOptionEnableTunnel = "enable-tunnel";
const String kOptionEnableRemoteRestart = "enable-remote-restart";
const String kOptionEnableBlockInput = "enable-block-input";
@@ -159,6 +164,7 @@ const String kOptionPeerTabVisible = "peer-tab-visible";
const String kOptionPeerCardUiType = "peer-card-ui-type";
const String kOptionCurrentAbName = "current-ab-name";
const String kOptionEnableConfirmClosingTabs = "enable-confirm-closing-tabs";
const String kOptionEnablePortForwardMux = "enable-port-forward-mux";
const String kOptionAllowAlwaysSoftwareRender = "allow-always-software-render";
const String kOptionEnableCheckUpdate = "enable-check-update";
const String kOptionAllowAutoUpdate = "allow-auto-update";
@@ -166,12 +172,10 @@ const String kOptionAllowRemoveWallpaper = "allow-remove-wallpaper";
const String kOptionStopService = "stop-service";
const String kOptionDirectxCapture = "enable-directx-capture";
const String kOptionAllowRemoteCmModification = "allow-remote-cm-modification";
const String kOptionEnableTcpPunch = "enable-tcp-punch";
const String kOptionEnableUdpPunch = "enable-udp-punch";
const String kOptionEnableIpv6Punch = "enable-ipv6-punch";
const String kOptionAllowSyncClipboardBetweenSessions =
"allow-sync-clipboard-between-sessions";
const String kOptionEnableWebrtc = "enable-webrtc";
const String kOptionEnableTrustedDevices = "enable-trusted-devices";
const String kOptionShowVirtualMouse = "show-virtual-mouse";
const String kOptionVirtualMouseScale = "virtual-mouse-scale";

View File

@@ -330,12 +330,14 @@ class _ConnectionPageState extends State<ConnectionPage>
void onConnect(
{bool isFileTransfer = false,
bool isViewCamera = false,
bool isTerminal = false}) {
bool isTerminal = false,
bool isTcpTunneling = false}) {
var id = _idController.id;
connect(context, id,
isFileTransfer: isFileTransfer,
isViewCamera: isViewCamera,
isTerminal: isTerminal);
isTerminal: isTerminal,
isTcpTunneling: isTcpTunneling);
}
/// UI for the remote ID TextField.
@@ -568,6 +570,14 @@ class _ConnectionPageState extends State<ConnectionPage>
'${translate('Terminal')} (beta)',
() => onConnect(isTerminal: true)
),
// `connect` routes this through the
// desktop path only; the peer card gates
// it the same way.
if (isDesktop)
(
'TCP tunneling',
() => onConnect(isTcpTunneling: true)
),
]
.map((e) => MenuEntryButton<String>(
childBuilder: (TextStyle? style) =>

View File

@@ -509,6 +509,15 @@ class _GeneralState extends State<_General> {
kOptionOpenNewConnInTabs,
isServer: false,
),
Tooltip(
message: translate('port-forward-mux-tip'),
child: _OptionCheckBox(
context,
'Reuse one connection for port forwarding',
kOptionEnablePortForwardMux,
isServer: false,
),
),
// though this is related to GUI, but opengl problem affects all users, so put in config rather than local
if (isLinux)
Tooltip(
@@ -563,12 +572,6 @@ class _GeneralState extends State<_General> {
kOptionDirectxCapture,
),
if (!isWeb && !incomingOnly) ...[
_OptionCheckBox(
context,
'Enable TCP hole punching',
kOptionEnableTcpPunch,
isServer: false,
),
_OptionCheckBox(
context,
'Enable UDP hole punching',
@@ -581,12 +584,6 @@ class _GeneralState extends State<_General> {
kOptionEnableIpv6Punch,
isServer: false,
),
_OptionCheckBox(
context,
'Enable WebRTC P2P connection',
kOptionEnableWebrtc,
isServer: false,
),
Tooltip(
message: translate('sync-clipboard-between-sessions-tip'),
child: _OptionCheckBox(
@@ -2092,14 +2089,13 @@ class _DisplayState extends State<_Display> {
}
Widget otherRow(String label, String key) {
final value = bind.mainGetUserDefaultOption(key: key) == 'Y';
final isOptFixed = isOptionFixed(key);
final value = getOtherDefaultSettingOption(key) == 'Y';
final isOptFixed = isOtherDefaultSettingReadOnly(key);
onChanged(bool b) async {
await bind.mainSetUserDefaultOption(
key: key,
value: b
? 'Y'
: (key == kOptionEnableFileCopyPaste ? 'N' : defaultOptionNo));
await setOtherDefaultSettingOption(
key,
b ? 'Y' : (key == kOptionEnableFileCopyPaste ? 'N' : defaultOptionNo),
);
setState(() {});
}

View File

@@ -19,6 +19,8 @@ class TerminalPage extends StatefulWidget {
required this.tabKey,
this.forceRelay,
this.connToken,
this.onClipboardWriteBlocked,
this.onClipboardWriteSucceeded,
}) : super(key: key);
final String id;
final String? password;
@@ -26,6 +28,8 @@ class TerminalPage extends StatefulWidget {
final bool? forceRelay;
final bool? isSharedPassword;
final String? connToken;
final ValueChanged<String>? onClipboardWriteBlocked;
final ValueChanged<String>? onClipboardWriteSucceeded;
final int terminalId;
/// Tab key for focus management, passed from parent to avoid duplicate construction
@@ -71,6 +75,8 @@ class _TerminalPageState extends State<TerminalPage>
// Create terminal model with specific terminal ID
_terminalModel = TerminalModel(_ffi, widget.terminalId);
_terminalModel.onClipboardWriteBlocked = widget.onClipboardWriteBlocked;
_terminalModel.onClipboardWriteSucceeded = widget.onClipboardWriteSucceeded;
debugPrint(
'[TerminalPage] Terminal model created for terminal ${widget.terminalId}');

View File

@@ -1,3 +1,4 @@
import 'dart:async';
import 'dart:convert';
import 'package:desktop_multi_window/desktop_multi_window.dart';
@@ -10,6 +11,8 @@ import 'package:flutter_hbb/models/state_model.dart';
import 'package:flutter_hbb/desktop/widgets/tabbar_widget.dart';
import 'package:flutter_hbb/utils/multi_window_manager.dart';
import 'package:flutter_hbb/models/model.dart';
import 'package:flutter_hbb/models/terminal_copy_shortcut.dart';
import 'package:flutter_hbb/models/terminal_model.dart';
import 'package:get/get.dart';
import '../../models/platform_model.dart';
@@ -19,6 +22,12 @@ import '../widgets/material_mod_popup_menu.dart' as mod_menu;
import '../widgets/popup_menu.dart';
import 'package:bot_toast/bot_toast.dart';
typedef _TerminalClipboardSource = ({
String peerId,
int terminalId,
String tabKey,
});
class TerminalTabPage extends StatefulWidget {
final Map<String, dynamic> params;
@@ -30,6 +39,18 @@ class TerminalTabPage extends StatefulWidget {
class _TerminalTabPageState extends State<TerminalTabPage> {
DesktopTabController get tabController => Get.find<DesktopTabController>();
bool get _canConfigureTerminalClipboardPermission =>
canConfigureTerminalClipboardPermission(
settingsDisabled: bind.isDisableSettings(),
optionFixed: isOptionFixed(kOptionAllowTerminalClipboardWrite),
);
bool get _canHandleTerminalClipboardWriteRequest =>
canHandleTerminalClipboardWriteRequest(
localOption: bind.mainGetLocalOption(
key: kOptionAllowTerminalClipboardWrite,
),
canConfigurePermission: _canConfigureTerminalClipboardPermission,
);
static const IconData selectedIcon = Icons.terminal;
static const IconData unselectedIcon = Icons.terminal_outlined;
@@ -38,6 +59,9 @@ class _TerminalTabPageState extends State<TerminalTabPage> {
final Set<String> _closingTabs = {};
// When true, all session cleanup should persist (window-level close in progress)
bool _windowClosing = false;
CancelFunc? _terminalClipboardNoticeCancel;
final _terminalClipboardNotice =
TerminalClipboardNoticeCoordinator<_TerminalClipboardSource>();
_TerminalTabPageState(Map<String, dynamic> params) {
Get.put(DesktopTabController(tabType: DesktopTabType.terminal));
@@ -45,7 +69,10 @@ class _TerminalTabPageState extends State<TerminalTabPage> {
WindowController.fromWindowId(windowId())
.setTitle(getWindowNameWithId(id));
};
tabController.onRemoved = (_, id) => onRemoveId(id);
tabController.onRemoved = (_, id) {
_closeTerminalClipboardNoticeForTab(id);
onRemoveId(id);
};
tabController.onCloseWindow = _closeWindowFromConnection;
final terminalId = params['terminalId'] ?? _nextTerminalId++;
tabController.add(_createTerminalTab(
@@ -70,6 +97,11 @@ class _TerminalTabPageState extends State<TerminalTabPage> {
final alias = bind.mainGetPeerOptionSync(id: peerId, key: 'alias');
final tabLabel =
alias.isNotEmpty ? '$alias #$terminalId' : '$peerId #$terminalId';
final clipboardSource = (
peerId: peerId,
terminalId: terminalId,
tabKey: tabKey,
);
return TabInfo(
key: tabKey,
label: tabLabel,
@@ -86,10 +118,169 @@ class _TerminalTabPageState extends State<TerminalTabPage> {
tabController: tabController,
forceRelay: forceRelay,
connToken: connToken,
onClipboardWriteBlocked: _canHandleTerminalClipboardWriteRequest
? (text) => _handleTerminalClipboardWriteBlocked(
clipboardSource,
text,
)
: null,
onClipboardWriteSucceeded: (_) {
_handleTerminalClipboardWriteSucceeded(clipboardSource);
},
),
);
}
void _handleTerminalClipboardWriteBlocked(
_TerminalClipboardSource source,
String clipboardText,
) {
if (!mounted) return;
final option = bind.mainGetLocalOption(
key: kOptionAllowTerminalClipboardWrite,
);
final request = _terminalClipboardNotice.recordBlocked(
source: source,
text: clipboardText,
option: option,
canWrite: _canWriteTerminalClipboard,
);
if (request != null) _showTerminalClipboardNotice(request);
}
void _showTerminalClipboardNotice(
TerminalClipboardNoticeRequest<_TerminalClipboardSource> request,
) {
_terminalClipboardNoticeCancel = BotToast.showCustomNotification(
duration: null,
enableSlideOff: false,
onlyOne: true,
onClose: _handleTerminalClipboardNoticeClosed,
toastBuilder: (_) => AnimatedBuilder(
animation: _terminalClipboardNotice,
builder: (_, __) => MaterialBanner(
leading: const Icon(Icons.content_copy_outlined),
content: Text(translate(kTerminalClipboardNoticeMessageKey)),
actions: [
TextButton(
onPressed: _terminalClipboardNotice.canClaimAction
? _handleTerminalClipboardNegativeAction
: null,
child: Text(translate(request.negativeActionKey)),
),
TextButton(
onPressed: _terminalClipboardNotice.canClaimAction
? _handleTerminalClipboardPositiveAction
: null,
child: Text(translate(request.actionKey)),
),
],
),
),
);
}
void _handleTerminalClipboardNegativeAction() {
final request = _terminalClipboardNotice.claimCurrentAction();
if (request == null) return;
if (request.persistAllowed) {
unawaited(_declineTerminalClipboardWrite());
} else {
_closeTerminalClipboardNotice();
}
}
void _handleTerminalClipboardPositiveAction() {
final request = _terminalClipboardNotice.claimCurrentAction();
if (request == null) return;
unawaited(_completeTerminalClipboardWrite(request));
}
void _handleTerminalClipboardNoticeClosed() {
_terminalClipboardNoticeCancel = null;
_terminalClipboardNotice.noticeClosed();
}
bool _canWriteTerminalClipboard(
_TerminalClipboardSource source,
) {
if (!_canHandleTerminalClipboardWriteRequest) return false;
final ffi = TerminalConnectionManager.getExistingConnection(source.peerId);
return ffi != null &&
!ffi.closed &&
ffi.ffiModel.permissions['clipboard'] != false &&
tabController.state.value.tabs.any((tab) => tab.key == source.tabKey) &&
ffi.terminalModels.containsKey(source.terminalId);
}
void _handleTerminalClipboardWriteSucceeded(
_TerminalClipboardSource source,
) {
final request = _terminalClipboardNotice.currentForSource(source);
if (request == null) return;
_closeTerminalClipboardNotice();
}
Future<void> _declineTerminalClipboardWrite() async {
try {
await bind.mainSetLocalOption(
key: kOptionAllowTerminalClipboardWrite,
value: kTerminalClipboardWriteDenied,
);
} catch (error) {
debugPrint(
'[TerminalTabPage] Failed to save terminal clipboard permission: $error');
return;
} finally {
_terminalClipboardNotice.releaseAction();
}
_closeTerminalClipboardNotice();
}
Future<void> _completeTerminalClipboardWrite(
TerminalClipboardNoticeRequest<_TerminalClipboardSource> request,
) async {
final source = request.source;
var completed = false;
try {
completed = await completeTerminalClipboardWrite(
clipboardText: request.text,
canWrite: () => _canWriteTerminalClipboard(source),
writeClipboard: writeTerminalClipboard,
persistAllowed: request.persistAllowed
? () => bind.mainSetLocalOption(
key: kOptionAllowTerminalClipboardWrite,
value: kTerminalClipboardWriteAllowed,
)
: null,
);
} catch (error) {
debugPrint(
'[TerminalTabPage] Failed to complete terminal clipboard write: $error');
} finally {
_terminalClipboardNotice.releaseAction();
}
if (!completed) return;
_closeTerminalClipboardNotice();
}
void _closeTerminalClipboardNoticeForTab(String tabKey) {
final current = _terminalClipboardNotice.current;
if (current?.source.tabKey != tabKey) return;
_closeTerminalClipboardNotice();
}
void _closeTerminalClipboardNotice() {
if (!_terminalClipboardNotice.beginClose()) return;
final cancel = _terminalClipboardNoticeCancel;
if (cancel == null) {
debugPrint('[TerminalTabPage] Clipboard notice controller is missing');
_terminalClipboardNotice.noticeClosed();
return;
}
cancel();
}
/// Unified tab close handler for all close paths (button, shortcut, programmatic).
/// Shows audit dialog, cleans up session if not persistent, then removes the UI tab.
Future<void> _closeTab(String tabKey) async {
@@ -147,6 +338,8 @@ class _TerminalTabPageState extends State<TerminalTabPage> {
// Remove all UI tabs immediately (same instant behavior as the old tabController.clear())
// Keep the cleanup target lookup below synchronous before its first await:
// it relies on the current frame still retaining each TerminalPage's FFI/model.
_terminalClipboardNotice.clear();
_terminalClipboardNoticeCancel?.call();
tabController.clear();
// Run session cleanup in parallel with bounded timeout (closeTerminal() has internal 3s timeout).
// Skip tabs already being closed by a concurrent _closeTab() to avoid duplicate FFI calls.
@@ -357,6 +550,8 @@ class _TerminalTabPageState extends State<TerminalTabPage> {
@override
void dispose() {
HardwareKeyboard.instance.removeHandler(_handleKeyEvent);
_terminalClipboardNotice.clear();
_terminalClipboardNoticeCancel?.call();
super.dispose();
}

View File

@@ -97,12 +97,10 @@ class _SettingsState extends State<SettingsPage> with WidgetsBindingObserver {
var _hideNetwork = false;
var _hideWebSocket = false;
var _enableTrustedDevices = false;
var _enableTcpPunch = false;
var _enableUdpPunch = false;
var _allowInsecureTlsFallback = false;
var _disableUdp = false;
var _enableIpv6Punch = false;
var _enableWebrtc = false;
var _isUsingPublicServer = false;
var _allowAskForNoteAtEndOfConnection = false;
var _preventSleepWhileConnected = true;
@@ -143,10 +141,8 @@ class _SettingsState extends State<SettingsPage> with WidgetsBindingObserver {
bind.mainGetBuildinOption(key: kOptionHideWebSocketSetting) == 'Y' ||
isWeb;
_enableTrustedDevices = mainGetBoolOptionSync(kOptionEnableTrustedDevices);
_enableTcpPunch = mainGetLocalBoolOptionSync(kOptionEnableTcpPunch);
_enableUdpPunch = mainGetLocalBoolOptionSync(kOptionEnableUdpPunch);
_enableIpv6Punch = mainGetLocalBoolOptionSync(kOptionEnableIpv6Punch);
_enableWebrtc = mainGetLocalBoolOptionSync(kOptionEnableWebrtc);
_allowAskForNoteAtEndOfConnection =
mainGetLocalBoolOptionSync(kOptionAllowAskForNoteAtEndOfConnection);
_preventSleepWhileConnected =
@@ -819,65 +815,31 @@ class _SettingsState extends State<SettingsPage> with WidgetsBindingObserver {
});
},
),
if (!incomingOnly)
SettingsTile.switchTile(
title: Text(translate('Enable TCP hole punching')),
initialValue: _enableTcpPunch,
onToggle: isOptionFixed(kOptionEnableTcpPunch)
? null
: (v) async {
await mainSetLocalBoolOption(kOptionEnableTcpPunch, v);
final newValue =
mainGetLocalBoolOptionSync(kOptionEnableTcpPunch);
setState(() {
_enableTcpPunch = newValue;
});
},
),
if (!incomingOnly)
SettingsTile.switchTile(
title: Text(translate('Enable UDP hole punching')),
initialValue: _enableUdpPunch,
onToggle: isOptionFixed(kOptionEnableUdpPunch)
? null
: (v) async {
await mainSetLocalBoolOption(kOptionEnableUdpPunch, v);
final newValue =
mainGetLocalBoolOptionSync(kOptionEnableUdpPunch);
setState(() {
_enableUdpPunch = newValue;
});
},
onToggle: (v) async {
await mainSetLocalBoolOption(kOptionEnableUdpPunch, v);
final newValue =
mainGetLocalBoolOptionSync(kOptionEnableUdpPunch);
setState(() {
_enableUdpPunch = newValue;
});
},
),
if (!incomingOnly)
SettingsTile.switchTile(
title: Text(translate('Enable IPv6 P2P connection')),
initialValue: _enableIpv6Punch,
onToggle: isOptionFixed(kOptionEnableIpv6Punch)
? null
: (v) async {
await mainSetLocalBoolOption(kOptionEnableIpv6Punch, v);
final newValue =
mainGetLocalBoolOptionSync(kOptionEnableIpv6Punch);
setState(() {
_enableIpv6Punch = newValue;
});
},
),
if (!incomingOnly)
SettingsTile.switchTile(
title: Text(translate('Enable WebRTC P2P connection')),
initialValue: _enableWebrtc,
onToggle: isOptionFixed(kOptionEnableWebrtc)
? null
: (v) async {
await mainSetLocalBoolOption(kOptionEnableWebrtc, v);
final newValue =
mainGetLocalBoolOptionSync(kOptionEnableWebrtc);
setState(() {
_enableWebrtc = newValue;
});
},
onToggle: (v) async {
await mainSetLocalBoolOption(kOptionEnableIpv6Punch, v);
final newValue =
mainGetLocalBoolOptionSync(kOptionEnableIpv6Punch);
setState(() {
_enableIpv6Punch = newValue;
});
},
),
SettingsTile(
title: Text(translate('Language')),
@@ -1307,16 +1269,18 @@ class __DisplayPageState extends State<_DisplayPage> {
}
SettingsTile otherRow(String label, String key) {
final value = bind.mainGetUserDefaultOption(key: key) == 'Y';
final isOptFixed = isOptionFixed(key);
final value = getOtherDefaultSettingOption(key) == 'Y';
final isOptFixed = isOtherDefaultSettingReadOnly(key);
return SettingsTile.switchTile(
initialValue: value,
title: Text(translate(label)),
onToggle: isOptFixed
? null
: (b) async {
await bind.mainSetUserDefaultOption(
key: key, value: b ? 'Y' : defaultOptionNo);
await setOtherDefaultSettingOption(
key,
b ? 'Y' : defaultOptionNo,
);
setState(() {});
},
);

View File

@@ -11,6 +11,7 @@ import 'package:flutter_hbb/models/model.dart';
import 'package:flutter_hbb/models/platform_model.dart';
import 'package:flutter_hbb/models/terminal_copy_shortcut.dart';
import 'package:flutter_hbb/models/terminal_model.dart';
import 'package:flutter_hbb/models/terminal_mouse_handler.dart';
import 'package:flutter_hbb/mobile/terminal_keyboard_utils.dart';
import 'package:flutter_hbb/web/dummy.dart'
if (dart.library.html) 'package:flutter_hbb/web/terminal_font.dart';
@@ -19,6 +20,49 @@ import 'package:xterm/xterm.dart';
import '../../desktop/pages/terminal_connection_manager.dart';
import '../../consts.dart';
const _terminalBackgroundOpacity = 0.7;
Widget _buildTerminalViewForPlatform({
required bool reportMouseInput,
required bool reportTouchInput,
required Terminal terminal,
required TerminalController controller,
required TerminalStyle textStyle,
required EdgeInsets padding,
required bool deleteDetection,
required Map<ShortcutActivator, Intent>? shortcuts,
required FocusOnKeyEventCallback onKeyEvent,
required void Function(TapDownDetails, CellOffset) onSecondaryTapDown,
}) {
if (reportMouseInput || reportTouchInput) {
return TerminalMouseInteraction(
terminal,
controller: controller,
autofocus: true,
textStyle: textStyle,
deleteDetection: deleteDetection,
reportTouchInput: reportTouchInput,
shortcuts: shortcuts,
onKeyEvent: onKeyEvent,
backgroundOpacity: _terminalBackgroundOpacity,
padding: padding,
onSecondaryTapDown: onSecondaryTapDown,
);
}
return TerminalView(
terminal,
controller: controller,
autofocus: true,
textStyle: textStyle,
deleteDetection: deleteDetection,
shortcuts: shortcuts,
onKeyEvent: onKeyEvent,
backgroundOpacity: _terminalBackgroundOpacity,
padding: padding,
onSecondaryTapDown: onSecondaryTapDown,
);
}
class TerminalPage extends StatefulWidget {
const TerminalPage({
Key? key,
@@ -41,6 +85,19 @@ class TerminalPage extends StatefulWidget {
class _TerminalPageState extends State<TerminalPage>
with AutomaticKeepAliveClientMixin, WidgetsBindingObserver {
bool get _canConfigureTerminalClipboardPermission =>
canConfigureTerminalClipboardPermission(
settingsDisabled: bind.isDisableSettings(),
optionFixed: isOptionFixed(kOptionAllowTerminalClipboardWrite),
);
bool get _canHandleTerminalClipboardWriteRequest =>
canHandleTerminalClipboardWriteRequest(
localOption: bind.mainGetLocalOption(
key: kOptionAllowTerminalClipboardWrite,
),
canConfigurePermission: _canConfigureTerminalClipboardPermission,
);
late FFI _ffi;
late TerminalModel _terminalModel;
double? _cellHeight;
@@ -57,6 +114,9 @@ class _TerminalPageState extends State<TerminalPage>
// For iOS edge swipe gesture
double _swipeStartX = 0;
double _swipeCurrentX = 0;
ScaffoldFeatureController<MaterialBanner, MaterialBannerClosedReason>?
_terminalClipboardNoticeController;
final _terminalClipboardNotice = TerminalClipboardNoticeCoordinator<int>();
// For web only.
// 'monospace' does not work on web, use Google Fonts, `??` is only for null safety.
@@ -89,6 +149,12 @@ class _TerminalPageState extends State<TerminalPage>
// Create terminal model with specific terminal ID
_terminalModel = TerminalModel(_ffi, widget.terminalId);
if (_canHandleTerminalClipboardWriteRequest) {
_terminalModel.onClipboardWriteBlocked =
_handleTerminalClipboardWriteBlocked;
_terminalModel.onClipboardWriteSucceeded =
_handleTerminalClipboardWriteSucceeded;
}
debugPrint(
'[TerminalPage] Terminal model created for terminal ${widget.terminalId}');
@@ -134,12 +200,144 @@ class _TerminalPageState extends State<TerminalPage>
_ffi.ffiModel.updateEventListener(_ffi.sessionId, widget.id);
}
void _handleTerminalClipboardWriteBlocked(String clipboardText) {
if (!mounted) return;
final option = bind.mainGetLocalOption(
key: kOptionAllowTerminalClipboardWrite,
);
final request = _terminalClipboardNotice.recordBlocked(
source: widget.terminalId,
text: clipboardText,
option: option,
canWrite: (_) => _canWriteTerminalClipboard,
);
if (request != null) _showTerminalClipboardNotice(request);
}
void _showTerminalClipboardNotice(
TerminalClipboardNoticeRequest<int> request,
) {
final controller = ScaffoldMessenger.of(context).showMaterialBanner(
MaterialBanner(
leading: const Icon(Icons.content_copy_outlined),
content: Text(translate(kTerminalClipboardNoticeMessageKey)),
actions: [
AnimatedBuilder(
animation: _terminalClipboardNotice,
builder: (_, __) => TextButton(
onPressed: _terminalClipboardNotice.canClaimAction
? _handleTerminalClipboardNegativeAction
: null,
child: Text(translate(request.negativeActionKey)),
),
),
AnimatedBuilder(
animation: _terminalClipboardNotice,
builder: (_, __) => TextButton(
onPressed: _terminalClipboardNotice.canClaimAction
? _handleTerminalClipboardPositiveAction
: null,
child: Text(translate(request.actionKey)),
),
),
],
),
);
_terminalClipboardNoticeController = controller;
unawaited(controller.closed.then<void>((_) {
if (identical(_terminalClipboardNoticeController, controller)) {
_terminalClipboardNoticeController = null;
_terminalClipboardNotice.noticeClosed();
}
}));
}
void _handleTerminalClipboardNegativeAction() {
final request = _terminalClipboardNotice.claimCurrentAction();
if (request == null) return;
if (request.persistAllowed) {
unawaited(_declineTerminalClipboardWrite());
} else {
_closeTerminalClipboardNotice();
}
}
void _handleTerminalClipboardPositiveAction() {
final request = _terminalClipboardNotice.claimCurrentAction();
if (request == null) return;
unawaited(_completeTerminalClipboardWrite(request));
}
bool get _canWriteTerminalClipboard =>
_canHandleTerminalClipboardWriteRequest &&
!_ffi.closed &&
_ffi.ffiModel.permissions['clipboard'] != false;
void _handleTerminalClipboardWriteSucceeded(String _) {
_closeTerminalClipboardNotice();
}
Future<void> _declineTerminalClipboardWrite() async {
try {
await bind.mainSetLocalOption(
key: kOptionAllowTerminalClipboardWrite,
value: kTerminalClipboardWriteDenied,
);
} catch (error) {
debugPrint(
'[TerminalPage] Failed to save terminal clipboard permission: $error');
return;
} finally {
_terminalClipboardNotice.releaseAction();
}
_closeTerminalClipboardNotice();
}
Future<void> _completeTerminalClipboardWrite(
TerminalClipboardNoticeRequest<int> request,
) async {
var completed = false;
try {
completed = await completeTerminalClipboardWrite(
clipboardText: request.text,
canWrite: () => _canWriteTerminalClipboard,
writeClipboard: writeTerminalClipboard,
persistAllowed: request.persistAllowed
? () => bind.mainSetLocalOption(
key: kOptionAllowTerminalClipboardWrite,
value: kTerminalClipboardWriteAllowed,
)
: null,
);
} catch (error) {
debugPrint(
'[TerminalPage] Failed to complete terminal clipboard write: $error');
} finally {
_terminalClipboardNotice.releaseAction();
}
if (!completed) return;
_closeTerminalClipboardNotice();
}
void _closeTerminalClipboardNotice() {
if (!_terminalClipboardNotice.beginClose()) return;
final controller = _terminalClipboardNoticeController;
if (controller == null) {
debugPrint('[TerminalPage] Clipboard notice controller is missing');
_terminalClipboardNotice.noticeClosed();
return;
}
controller.close();
}
@override
void dispose() {
// Unregister terminal model from FFI
_ffi.unregisterTerminalModel(widget.terminalId);
_terminalModel.dispose();
_keyboardDebounce?.cancel();
_terminalClipboardNotice.clear();
_terminalClipboardNoticeController?.close();
WidgetsBinding.instance.removeObserver(this);
super.dispose();
TerminalConnectionManager.releaseConnection(widget.id);
@@ -234,12 +432,12 @@ class _TerminalPageState extends State<TerminalPage>
child: LayoutBuilder(
builder: (context, constraints) {
final heightPx = constraints.maxHeight;
return TerminalView(
_terminalModel.terminal,
return _buildTerminalViewForPlatform(
reportMouseInput: isWebDesktop || isAndroid,
reportTouchInput: isIOS,
terminal: _terminalModel.terminal,
controller: _terminalModel.terminalController,
autofocus: true,
textStyle: _getTerminalStyle(),
backgroundOpacity: 0.7,
// The following comment is from xterm.dart source code:
// Workaround to detect delete key for platforms and IMEs that do not
// emit a hardware delete event. Preferred on mobile platforms. [false] by

View File

@@ -1,7 +1,108 @@
import 'dart:async';
import 'dart:convert';
import 'package:flutter/foundation.dart';
import 'package:xterm/xterm.dart';
enum TerminalClipboardWritePermission { denied, unconfigured, allowed }
class RustDeskTerminal extends Terminal {
RustDeskTerminal({super.maxLines});
RustDeskTerminal({
super.maxLines,
required TerminalClipboardWritePermission Function()
clipboardWritePermission,
required Future<bool> Function(String) onClipboardWrite,
ValueChanged<String>? onClipboardWriteBlocked,
ValueChanged<String>? onClipboardWriteSucceeded,
}) : _clipboardWritePermission = clipboardWritePermission,
_onClipboardWrite = onClipboardWrite,
_onClipboardWriteBlocked = onClipboardWriteBlocked,
_onClipboardWriteSucceeded = onClipboardWriteSucceeded {
onPrivateOSC = _handlePrivateOsc;
}
static const _clipboardOscCode = '52';
static const _systemClipboardSelection = 'c';
// Match the terminal helper's existing payload safety ceiling.
static const _maxClipboardWriteBytes = 16 * 1024 * 1024;
static const _base64InputBytesPerBlock = 3;
static const _base64EncodedCharsPerBlock = 4;
static final _osc52Selection = RegExp(r'^[cpqs0-7]*$');
final TerminalClipboardWritePermission Function() _clipboardWritePermission;
final Future<bool> Function(String) _onClipboardWrite;
final ValueChanged<String>? _onClipboardWriteBlocked;
final ValueChanged<String>? _onClipboardWriteSucceeded;
bool get isClipboardWriteAllowed =>
_clipboardWritePermission() == TerminalClipboardWritePermission.allowed;
void _handlePrivateOsc(String code, List<String> args) {
if (code != _clipboardOscCode) return;
if (args.length != 2 || !_osc52Selection.hasMatch(args.first)) {
debugPrint('[RustDeskTerminal] Rejected malformed OSC 52 command');
return;
}
if (args.last == '?') {
debugPrint('[RustDeskTerminal] Rejected OSC 52 clipboard query');
return;
}
final permission = _clipboardWritePermission();
if (permission == TerminalClipboardWritePermission.denied) {
debugPrint('[RustDeskTerminal] Rejected unauthorized OSC 52 write');
return;
}
final selection = args.first;
if (selection.isNotEmpty &&
!selection.contains(_systemClipboardSelection)) {
debugPrint('[RustDeskTerminal] Ignored unsupported OSC 52 selection');
return;
}
if (selection.replaceAll(_systemClipboardSelection, '').isNotEmpty) {
debugPrint('[RustDeskTerminal] Ignored unsupported OSC 52 selections');
}
final text = _decodeClipboardPayload(args.last);
if (text == null) return;
if (permission == TerminalClipboardWritePermission.unconfigured) {
debugPrint('[RustDeskTerminal] Blocked OSC 52 write pending consent');
_onClipboardWriteBlocked?.call(text);
return;
}
unawaited(_writeClipboard(text));
}
Future<void> _writeClipboard(String text) async {
final succeeded = await _onClipboardWrite(text);
if (succeeded) {
_onClipboardWriteSucceeded?.call(text);
return;
}
debugPrint(
'[RustDeskTerminal] OSC 52 clipboard write requires interaction');
_onClipboardWriteBlocked?.call(text);
}
String? _decodeClipboardPayload(String payload) {
if (payload.length > _maxBase64EncodedLength(_maxClipboardWriteBytes)) {
debugPrint('[RustDeskTerminal] Rejected oversized OSC 52 payload');
return null;
}
try {
final bytes = base64.decode(payload);
if (bytes.length > _maxClipboardWriteBytes) {
debugPrint('[RustDeskTerminal] Rejected oversized OSC 52 payload');
return null;
}
return utf8.decode(bytes);
} on FormatException {
debugPrint('[RustDeskTerminal] Rejected malformed OSC 52 payload');
return null;
}
}
static int _maxBase64EncodedLength(int maxBytes) =>
((maxBytes + _base64InputBytesPerBlock - 1) ~/
_base64InputBytesPerBlock) *
_base64EncodedCharsPerBlock;
@override
void eraseScrollbackOnly() {

View File

@@ -0,0 +1,15 @@
import 'package:flutter/foundation.dart';
import 'package:flutter/services.dart';
Future<bool> writeTerminalClipboardPlatform(
String text, {
bool userInitiated = false,
}) async {
try {
await Clipboard.setData(ClipboardData(text: text));
return true;
} catch (error) {
debugPrint('[Terminal] Failed to write clipboard: $error');
return false;
}
}

View File

@@ -0,0 +1,29 @@
import 'dart:js_interop';
import 'package:flutter/foundation.dart';
const _writeTerminalClipboardCommand = 'write_terminal_clipboard';
@JS('setByName')
external JSPromise<JSBoolean> _setByName(
JSString name,
JSString value,
JSBoolean userInitiated,
);
Future<bool> writeTerminalClipboardPlatform(
String text, {
bool userInitiated = false,
}) async {
try {
final result = await _setByName(
_writeTerminalClipboardCommand.toJS,
text.toJS,
userInitiated.toJS,
).toDart;
return result.toDart;
} catch (error) {
debugPrint('[Terminal] Failed to write Web clipboard: $error');
return false;
}
}

View File

@@ -3,20 +3,130 @@ import 'dart:async';
import 'package:flutter/foundation.dart';
import 'package:flutter/services.dart';
import 'package:flutter/widgets.dart';
import 'package:flutter_hbb/consts.dart';
import 'package:xterm/xterm.dart';
import 'terminal_clipboard_writer.dart'
if (dart.library.html) 'terminal_clipboard_writer_web.dart';
const _controlShiftVPasteShortcut = SingleActivator(
LogicalKeyboardKey.keyV,
control: true,
shift: true,
);
Future<void> writeTerminalClipboard(String text) async {
try {
await Clipboard.setData(ClipboardData(text: text));
} catch (error) {
debugPrint('[Terminal] Failed to write clipboard: $error');
typedef TerminalClipboardWriter = Future<bool> Function(
String text, {
required bool userInitiated,
});
class TerminalClipboardNoticeRequest<T> {
const TerminalClipboardNoticeRequest({
required this.source,
required this.text,
required this.persistAllowed,
});
final T source;
final String text;
final bool persistAllowed;
String get actionKey => persistAllowed ? 'Enable' : 'Copy to clipboard';
String get negativeActionKey => persistAllowed ? 'Decline' : 'Dismiss';
}
const kTerminalClipboardNoticeMessageKey = 'terminal-clipboard-write-tip';
class TerminalClipboardNoticeCoordinator<T> extends ChangeNotifier {
TerminalClipboardNoticeRequest<T>? _current;
bool _noticeVisible = false;
bool _actionInProgress = false;
TerminalClipboardNoticeRequest<T>? get current => _current;
bool get canClaimAction =>
_noticeVisible && !_actionInProgress && _current != null;
TerminalClipboardNoticeRequest<T>? currentForSource(T source) {
final current = _current;
if (current == null || current.source != source) return null;
return current;
}
TerminalClipboardNoticeRequest<T>? recordBlocked({
required T source,
required String text,
required String option,
required bool Function(T source) canWrite,
}) {
if (!canWrite(source)) return null;
final requestAllowsPersistence =
option == kTerminalClipboardWriteUnconfigured;
if (option != kTerminalClipboardWriteAllowed && !requestAllowsPersistence) {
return null;
}
if (_noticeVisible && _actionInProgress) return null;
final wasVisible = _noticeVisible;
final persistAllowed =
wasVisible ? _current?.persistAllowed : requestAllowsPersistence;
final request = TerminalClipboardNoticeRequest(
source: source,
text: text,
persistAllowed: persistAllowed ?? requestAllowsPersistence,
);
_current = request;
if (wasVisible) return null;
_noticeVisible = true;
return request;
}
TerminalClipboardNoticeRequest<T>? claimCurrentAction() {
if (!canClaimAction) return null;
final current = _current;
if (current == null) return null;
_actionInProgress = true;
notifyListeners();
return current;
}
void releaseAction() {
if (!_actionInProgress) return;
_actionInProgress = false;
notifyListeners();
}
bool beginClose() {
if (!_noticeVisible) return false;
_actionInProgress = true;
notifyListeners();
return true;
}
void noticeClosed() => clear();
void clear() {
_current = null;
_noticeVisible = false;
_actionInProgress = false;
}
}
Future<bool> writeTerminalClipboard(
String text, {
bool userInitiated = false,
}) =>
writeTerminalClipboardPlatform(text, userInitiated: userInitiated);
Future<bool> completeTerminalClipboardWrite({
required String clipboardText,
required bool Function() canWrite,
required TerminalClipboardWriter writeClipboard,
Future<void> Function()? persistAllowed,
}) async {
if (!canWrite()) return false;
if (!await writeClipboard(clipboardText, userInitiated: true)) return false;
await persistAllowed?.call();
return true;
}
Map<ShortcutActivator, Intent>? platformTerminalShortcuts() {
@@ -68,7 +178,7 @@ FocusOnKeyEventCallback terminalCopyHandler(
if (selection != null && !selection.isCollapsed) {
if (event is KeyDownEvent) {
final text = terminal.buffer.getText(selection);
unawaited(writeTerminalClipboard(text));
unawaited(writeTerminalClipboard(text, userInitiated: true));
}
return KeyEventResult.handled;
}

View File

@@ -11,8 +11,38 @@ import 'input_modifier_utils.dart';
import 'model.dart';
import 'platform_model.dart';
import 'rustdesk_terminal.dart';
import 'terminal_copy_shortcut.dart';
import 'terminal_mouse_handler.dart';
bool canConfigureTerminalClipboardPermission({
required bool settingsDisabled,
required bool optionFixed,
}) =>
!settingsDisabled && !optionFixed;
bool canHandleTerminalClipboardWriteRequest({
required String localOption,
required bool canConfigurePermission,
}) =>
canConfigurePermission || localOption == kTerminalClipboardWriteAllowed;
TerminalClipboardWritePermission terminalClipboardWritePermission(
String localOption, {
required bool remoteClipboardEnabled,
bool canRequestConsent = true,
}) {
if (!remoteClipboardEnabled) {
return TerminalClipboardWritePermission.denied;
}
if (localOption == kTerminalClipboardWriteAllowed) {
return TerminalClipboardWritePermission.allowed;
}
if (localOption == kTerminalClipboardWriteUnconfigured && canRequestConsent) {
return TerminalClipboardWritePermission.unconfigured;
}
return TerminalClipboardWritePermission.denied;
}
class TerminalModel with ChangeNotifier {
final String id; // peer id
final FFI parent;
@@ -62,6 +92,9 @@ class TerminalModel with ChangeNotifier {
/// The listener (typically TerminalPage) can use this to auto-close the tab/page.
VoidCallback? onClosed;
ValueChanged<String>? onClipboardWriteBlocked;
ValueChanged<String>? onClipboardWriteSucceeded;
Future<void> _handleInput(String data) async {
// xterm can complete asynchronous input after the Flutter page has gone
// away. Stop before reading or clearing widget-owned modifier state.
@@ -130,7 +163,19 @@ class TerminalModel with ChangeNotifier {
}
TerminalModel(this.parent, [this.terminalId = 0]) : id = parent.id {
terminal = RustDeskTerminal(maxLines: 10000);
terminal = RustDeskTerminal(
maxLines: 10000,
onClipboardWrite: writeTerminalClipboard,
clipboardWritePermission: () => terminalClipboardWritePermission(
bind.mainGetLocalOption(key: kOptionAllowTerminalClipboardWrite),
remoteClipboardEnabled:
parent.ffiModel.permissions['clipboard'] != false,
canRequestConsent: onClipboardWriteBlocked != null,
),
onClipboardWriteBlocked: (text) => onClipboardWriteBlocked?.call(text),
onClipboardWriteSucceeded: (text) =>
onClipboardWriteSucceeded?.call(text),
);
terminal.mouseHandler = const WheelButtonFixMouseHandler();
terminalController = TerminalController();
@@ -593,6 +638,8 @@ class TerminalModel with ChangeNotifier {
clearAltLock = null;
onResizeExternal = null;
onClosed = null;
onClipboardWriteBlocked = null;
onClipboardWriteSucceeded = null;
// Clear buffers to free memory
_inputBuffer.clear();
_pendingOutputChunks.clear();

View File

@@ -62,13 +62,17 @@ class TerminalMouseDragReporter {
var _ownsControllerSuspension = false;
var _releasePending = false;
var _reporting = false;
var _dragged = false;
bool handleDown(
PointerDownEvent event,
Terminal terminal,
TerminalViewState? terminalView,
) {
if (!_isPrimaryMouse(event) || !_reportsDrag(terminal.mouseMode)) {
TerminalViewState? terminalView, {
bool reportTouchInput = false,
bool deferReport = false,
}) {
if (!_isPrimaryPointer(event, reportTouchInput) ||
!_reportsDrag(terminal.mouseMode)) {
return false;
}
if (terminalView == null || terminalView.widget.readOnly) return false;
@@ -83,14 +87,33 @@ class TerminalMouseDragReporter {
_pointerId = event.pointer;
_controller = controller;
_ownsControllerSuspension = true;
_releasePending = true;
_reporting = true;
_releasePending = !deferReport;
_reporting = !deferReport;
_dragged = false;
controller.setSuspendPointerInput(true);
_clearSelection(controller);
final position = _cellAt(event, terminalView);
_lastReportedPosition = position;
if (!deferReport) {
terminal.textInput(
_report(terminal.mouseReportMode, position),
);
}
return true;
}
bool activateDeferredDown(Terminal terminal) {
if (_pointerId == null ||
_controller == null ||
_releasePending ||
!_reportsDrag(terminal.mouseMode)) {
return false;
}
_releasePending = true;
_reporting = true;
_clearSelection(_controller);
terminal.textInput(
_report(terminal.mouseReportMode, position),
_report(terminal.mouseReportMode, _lastReportedPosition),
);
return true;
}
@@ -98,26 +121,36 @@ class TerminalMouseDragReporter {
bool handleMove(
PointerMoveEvent event,
Terminal terminal,
TerminalViewState? terminalView,
) {
TerminalViewState? terminalView, {
void Function(bool dragged)? beforeRelease,
void Function()? onCancel,
}) {
if (event.pointer != _pointerId) return false;
if (terminalView == null) {
onCancel?.call();
cancel();
return true;
}
final reportsDrag = _reportsDrag(terminal.mouseMode);
if (!_isPrimaryMouse(event)) {
if (!_hasPrimaryButton(event)) {
if (_releasePending && reportsDrag) {
_reportRelease(
_finishRelease(
event,
terminal,
_reporting ? _cellAt(event, terminalView) : _lastReportedPosition,
terminalView,
beforeRelease: beforeRelease,
);
} else {
onCancel?.call();
}
cancel();
return true;
}
if (!_reporting || !reportsDrag) {
if (!reportsDrag) _releasePending = false;
if (!reportsDrag && _releasePending) {
_releasePending = false;
onCancel?.call();
}
_reporting = false;
// Keep ownership until the matching end event to suppress local selection.
final controller = _controller;
@@ -126,7 +159,7 @@ class TerminalMouseDragReporter {
}
final position = _cellAt(event, terminalView);
_lastReportedPosition = position;
_recordPosition(position);
terminal.textInput(
_report(terminal.mouseReportMode, position, motion: true),
);
@@ -138,16 +171,22 @@ class TerminalMouseDragReporter {
bool handleEnd(
PointerEvent event,
Terminal terminal,
TerminalViewState? terminalView,
) {
TerminalViewState? terminalView, {
void Function(bool dragged)? beforeRelease,
void Function()? onCancel,
}) {
if (event.pointer != _pointerId) return false;
if (terminalView != null &&
_releasePending &&
_reportsDrag(terminal.mouseMode)) {
_reportRelease(
_finishRelease(
event,
terminal,
_reporting ? _cellAt(event, terminalView) : _lastReportedPosition,
terminalView,
beforeRelease: beforeRelease,
);
} else {
onCancel?.call();
}
_clearSelection(_controller);
final controller = _controller;
@@ -172,6 +211,7 @@ class TerminalMouseDragReporter {
_ownsControllerSuspension = false;
_releasePending = false;
_reporting = false;
_dragged = false;
}
void updateController(TerminalController controller) {
@@ -203,6 +243,24 @@ class TerminalMouseDragReporter {
);
}
void _finishRelease(
PointerEvent event,
Terminal terminal,
TerminalViewState terminalView, {
void Function(bool dragged)? beforeRelease,
}) {
final position =
_reporting ? _cellAt(event, terminalView) : _lastReportedPosition;
if (_reporting) _recordPosition(position);
beforeRelease?.call(_dragged);
_reportRelease(terminal, position);
}
void _recordPosition(CellOffset position) {
_dragged = _dragged || position != _lastReportedPosition;
_lastReportedPosition = position;
}
CellOffset _cellAt(PointerEvent event, TerminalViewState terminalView) {
final renderTerminal = terminalView.renderTerminal;
return renderTerminal.getCellOffset(
@@ -210,9 +268,13 @@ class TerminalMouseDragReporter {
);
}
bool _isPrimaryMouse(PointerEvent event) =>
event.kind == PointerDeviceKind.mouse &&
(event.buttons & kPrimaryMouseButton) == kPrimaryMouseButton;
bool _isPrimaryPointer(PointerEvent event, bool reportTouchInput) =>
(event.kind == PointerDeviceKind.mouse ||
reportTouchInput && event.kind == PointerDeviceKind.touch) &&
_hasPrimaryButton(event);
bool _hasPrimaryButton(PointerEvent event) =>
(event.buttons & kPrimaryButton) == kPrimaryButton;
bool _reportsDrag(MouseMode mode) =>
mode == MouseMode.upDownScrollDrag || mode == MouseMode.upDownScrollMove;

View File

@@ -1,45 +1,17 @@
import 'dart:async';
import 'package:flutter/foundation.dart';
import 'package:flutter/gestures.dart';
import 'package:flutter/widgets.dart';
import 'package:xterm/xterm.dart';
import 'platform_model.dart';
import 'rustdesk_terminal.dart';
import 'terminal_copy_shortcut.dart';
import 'terminal_mouse_drag_reporter.dart';
/// xterm 4.0.0 encodes wheel buttons as 68..71; the extra bit reads as a Shift
/// modifier, so strict full-screen apps ignore the report and never scroll.
/// Upstream fix: TerminalStudio/xterm.dart#238.
class WheelButtonFixMouseHandler implements TerminalMouseHandler {
const WheelButtonFixMouseHandler({this.positionProvider});
final CellOffset? Function()? positionProvider;
@override
String? call(TerminalMouseEvent event) {
if (!event.button.isWheel) {
return defaultMouseHandler(event);
}
// Same gate as UpDownMouseHandler: only the scroll modes report a wheel,
// and a wheel release is never reported, so the report is always a press.
if (!event.state.mouseMode.reportScroll ||
event.buttonState == TerminalMouseButtonState.up) {
return null;
}
return _reportWheel(event);
}
String _reportWheel(TerminalMouseEvent event) {
// Wheel buttons 4..7 go on the wire as 64..67, but `id` is 64 + 4..7.
final button = event.button.id - 4;
final position = positionProvider?.call() ?? event.position;
return encodeTerminalMouseReport(
event.state.mouseReportMode,
button,
position,
);
}
}
part 'terminal_mouse_handler_input.dart';
part 'terminal_web_clipboard_gesture.dart';
class TerminalMouseInteraction extends StatefulWidget {
const TerminalMouseInteraction(
@@ -47,6 +19,12 @@ class TerminalMouseInteraction extends StatefulWidget {
super.key,
required this.controller,
this.focusNode,
this.autofocus = false,
this.textStyle = const TerminalStyle(),
this.deleteDetection = false,
this.reportTouchInput = false,
this.shortcuts,
this.onKeyEvent,
this.backgroundOpacity = 1,
this.padding,
this.onSecondaryTapDown,
@@ -55,6 +33,12 @@ class TerminalMouseInteraction extends StatefulWidget {
final Terminal terminal;
final TerminalController controller;
final FocusNode? focusNode;
final bool autofocus;
final TerminalStyle textStyle;
final bool deleteDetection;
final bool reportTouchInput;
final Map<ShortcutActivator, Intent>? shortcuts;
final FocusOnKeyEventCallback? onKeyEvent;
final double backgroundOpacity;
final EdgeInsets? padding;
final void Function(TapDownDetails, CellOffset)? onSecondaryTapDown;
@@ -81,8 +65,13 @@ class _TerminalMouseInteractionState extends State<TerminalMouseInteraction> {
Buffer? _selectionBuffer;
int? _selectionPointerId;
Timer? _selectionScrollTimer;
Timer? _pendingTouchMouseTimer;
PointerDownEvent? _pendingTouchMouseDown;
var _selectionHasScrolled = false;
var _scrollDirection = _noScroll;
// xterm can finish its tap callbacks after the raw drag was reported.
var _suppressXtermLeftButton = false;
var _terminalClipboardGesturePrepared = false;
TerminalViewState? get _terminalView => _terminalViewKey.currentState;
@override
@@ -90,6 +79,7 @@ class _TerminalMouseInteractionState extends State<TerminalMouseInteraction> {
super.initState();
_mouseHandler = WheelButtonFixMouseHandler(
positionProvider: _cellAtPointer,
suppressLeftButton: kIsWeb ? _consumeXtermLeftButtonSuppression : null,
);
_installMouseHandler(widget.terminal);
}
@@ -100,10 +90,15 @@ class _TerminalMouseInteractionState extends State<TerminalMouseInteraction> {
final terminalChanged = !identical(oldWidget.terminal, widget.terminal);
final controllerChanged =
!identical(oldWidget.controller, widget.controller);
final touchInputChanged =
oldWidget.reportTouchInput != widget.reportTouchInput;
if (!terminalChanged && !controllerChanged && !touchInputChanged) return;
_cancelPendingTouchMouseDrag();
if (!terminalChanged && !controllerChanged) return;
if (controllerChanged && !terminalChanged) {
_mouseDrag.updateController(widget.controller);
} else {
_discardPendingTerminalClipboardWrites();
_mouseDrag.cancel();
}
_clearSelectionDrag();
@@ -123,46 +118,18 @@ class _TerminalMouseInteractionState extends State<TerminalMouseInteraction> {
}
}
CellOffset? _cellAtPointer() {
final terminalView = _terminalView;
final pointerPosition = _pointerPosition;
if (terminalView == null || pointerPosition == null) return null;
final renderTerminal = terminalView.renderTerminal;
return renderTerminal.getCellOffset(
renderTerminal.globalToLocal(pointerPosition),
);
}
void _updatePointerPosition(PointerEvent event) =>
_pointerPosition = event.position;
void _handlePointerDown(PointerDownEvent event) {
_updatePointerPosition(event);
if (_mouseDrag.handleDown(event, widget.terminal, _terminalView)) {
_clearSelectionDrag();
return;
}
if (event.kind != PointerDeviceKind.mouse ||
(event.buttons & kPrimaryMouseButton) != kPrimaryMouseButton) {
return;
}
_clearSelectionDrag();
final terminalView = _terminalView;
if (terminalView == null) return;
final renderTerminal = terminalView.renderTerminal;
final localPosition = renderTerminal.globalToLocal(event.position);
final selectionBuffer = widget.terminal.buffer;
_selectionPointerId = event.pointer;
_selectionBase = selectionBuffer.createAnchorFromOffset(
renderTerminal.getCellOffset(localPosition),
);
_selectionBuffer = selectionBuffer;
_selectionPointer = localPosition;
}
void _handlePointerMove(PointerMoveEvent event) {
_updatePointerPosition(event);
if (_mouseDrag.handleMove(event, widget.terminal, _terminalView)) return;
if (_handlePendingTouchMove(event)) return;
if (_mouseDrag.handleMove(
event,
widget.terminal,
_terminalView,
beforeRelease: _finishTerminalClipboardWrite,
onCancel: _cancelTerminalClipboardWrite,
)) {
return;
}
if (event.pointer != _selectionPointerId) return;
if (event.kind != PointerDeviceKind.mouse ||
(event.buttons & kPrimaryMouseButton) != kPrimaryMouseButton) {
@@ -241,8 +208,28 @@ class _TerminalMouseInteractionState extends State<TerminalMouseInteraction> {
void _handlePointerEnd(PointerEvent event) {
_updatePointerPosition(event);
if (!_mouseDrag.handleEnd(event, widget.terminal, _terminalView) &&
event.pointer != _selectionPointerId) return;
final pendingTouch = _pendingTouchMouseDown;
if (pendingTouch != null && pendingTouch.pointer == event.pointer) {
final movedBeyondSlop =
(event.position - pendingTouch.position).distance > kTouchSlop;
if (event is PointerUpEvent && !movedBeyondSlop) {
_activatePendingTouchMouseDrag(cancelOnFailure: false);
} else {
_takePendingTouchMouseDrag(pointer: event.pointer);
}
}
final handledByMouseDrag = _mouseDrag.handleEnd(
event,
widget.terminal,
_terminalView,
beforeRelease: event is PointerUpEvent
? _finishTerminalClipboardWrite
: (_) => _cancelTerminalClipboardWrite(),
onCancel: _cancelTerminalClipboardWrite,
);
if (!handledByMouseDrag && event.pointer != _selectionPointerId) {
return;
}
if (_selectionHasScrolled) _scrollSelection(scroll: false);
_clearSelectionDrag();
}
@@ -265,6 +252,8 @@ class _TerminalMouseInteractionState extends State<TerminalMouseInteraction> {
@override
void dispose() {
_discardPendingTerminalClipboardWrites();
_cancelPendingTouchMouseDrag();
_mouseDrag.cancel();
_clearSelectionDrag();
_restoreMouseHandler(widget.terminal);
@@ -290,10 +279,14 @@ class _TerminalMouseInteractionState extends State<TerminalMouseInteraction> {
controller: widget.controller,
scrollController: _scrollController,
focusNode: widget.focusNode,
autofocus: widget.autofocus,
textStyle: widget.textStyle,
deleteDetection: widget.deleteDetection,
backgroundOpacity: widget.backgroundOpacity,
padding: widget.padding,
shortcuts: platformTerminalShortcuts(),
onKeyEvent: terminalCopyHandler(widget.terminal, widget.controller),
shortcuts: widget.shortcuts ?? platformTerminalShortcuts(),
onKeyEvent: widget.onKeyEvent ??
terminalCopyHandler(widget.terminal, widget.controller),
onSecondaryTapDown: widget.onSecondaryTapDown,
),
);

View File

@@ -0,0 +1,162 @@
part of 'terminal_mouse_handler.dart';
/// xterm 4.0.0 encodes wheel buttons as 68..71; the extra bit reads as a Shift
/// modifier, so strict full-screen apps ignore the report and never scroll.
/// Upstream fix: TerminalStudio/xterm.dart#238.
class WheelButtonFixMouseHandler implements TerminalMouseHandler {
const WheelButtonFixMouseHandler({
this.positionProvider,
this.suppressLeftButton,
});
final CellOffset? Function()? positionProvider;
final bool Function(TerminalMouseButtonState)? suppressLeftButton;
@override
String? call(TerminalMouseEvent event) {
if (!event.button.isWheel) {
if (event.button == TerminalMouseButton.left &&
suppressLeftButton?.call(event.buttonState) == true) {
return null;
}
return defaultMouseHandler(event);
}
// Same gate as UpDownMouseHandler: only the scroll modes report a wheel,
// and a wheel release is never reported, so the report is always a press.
if (!event.state.mouseMode.reportScroll ||
event.buttonState == TerminalMouseButtonState.up) {
return null;
}
return _reportWheel(event);
}
String _reportWheel(TerminalMouseEvent event) {
// Wheel buttons 4..7 go on the wire as 64..67, but `id` is 64 + 4..7.
final button = event.button.id - 4;
final position = positionProvider?.call() ?? event.position;
return encodeTerminalMouseReport(
event.state.mouseReportMode,
button,
position,
);
}
}
extension _TerminalMouseInput on _TerminalMouseInteractionState {
CellOffset? _cellAtPointer() {
final terminalView = _terminalView;
final pointerPosition = _pointerPosition;
if (terminalView == null || pointerPosition == null) return null;
final renderTerminal = terminalView.renderTerminal;
return renderTerminal.getCellOffset(
renderTerminal.globalToLocal(pointerPosition),
);
}
void _updatePointerPosition(PointerEvent event) =>
_pointerPosition = event.position;
void _handlePointerDown(PointerDownEvent event) {
_updatePointerPosition(event);
_suppressXtermLeftButton = false;
if (_startPendingTouchMouseDrag(event)) return;
if (_mouseDrag.handleDown(event, widget.terminal, _terminalView)) {
_prepareTerminalClipboardWrite();
if (kIsWeb) _suppressXtermLeftButton = true;
_clearSelectionDrag();
return;
}
if (event.kind != PointerDeviceKind.mouse ||
(event.buttons & kPrimaryMouseButton) != kPrimaryMouseButton) {
return;
}
_clearSelectionDrag();
final terminalView = _terminalView;
if (terminalView == null) return;
final renderTerminal = terminalView.renderTerminal;
final localPosition = renderTerminal.globalToLocal(event.position);
final selectionBuffer = widget.terminal.buffer;
_selectionPointerId = event.pointer;
_selectionBase = selectionBuffer.createAnchorFromOffset(
renderTerminal.getCellOffset(localPosition),
);
_selectionBuffer = selectionBuffer;
_selectionPointer = localPosition;
}
bool _startPendingTouchMouseDrag(PointerDownEvent event) {
if (!widget.reportTouchInput ||
event.kind != PointerDeviceKind.touch ||
!_mouseDrag.handleDown(
event,
widget.terminal,
_terminalView,
reportTouchInput: true,
deferReport: true,
)) {
return false;
}
_pendingTouchMouseDown = event;
_pendingTouchMouseTimer = Timer(
kLongPressTimeout,
_activatePendingTouchMouseDrag,
);
return true;
}
bool _activatePendingTouchMouseDrag({
bool cancelOnFailure = true,
}) {
if (_takePendingTouchMouseDrag() == null) return false;
if (_mouseDrag.activateDeferredDown(widget.terminal)) {
_prepareTerminalClipboardWrite();
_clearSelectionDrag();
return true;
}
if (cancelOnFailure) _mouseDrag.cancel();
return false;
}
PointerDownEvent? _takePendingTouchMouseDrag({int? pointer}) {
final pending = _pendingTouchMouseDown;
if (pending == null || pointer != null && pointer != pending.pointer) {
return null;
}
_pendingTouchMouseTimer?.cancel();
_pendingTouchMouseTimer = null;
_pendingTouchMouseDown = null;
return pending;
}
void _cancelPendingTouchMouseDrag({
int? pointer,
bool deferCancel = false,
}) {
if (_takePendingTouchMouseDrag(pointer: pointer) == null) return;
if (deferCancel) {
scheduleMicrotask(_mouseDrag.cancel);
} else {
_mouseDrag.cancel();
}
}
bool _handlePendingTouchMove(PointerMoveEvent event) {
final pending = _pendingTouchMouseDown;
if (pending == null || pending.pointer != event.pointer) return false;
if ((event.position - pending.position).distance > kTouchSlop) {
_cancelPendingTouchMouseDrag(
pointer: event.pointer,
deferCancel: true,
);
}
return true;
}
bool _consumeXtermLeftButtonSuppression(TerminalMouseButtonState state) {
final suppress = _suppressXtermLeftButton;
if (state == TerminalMouseButtonState.up) {
_suppressXtermLeftButton = false;
}
return suppress;
}
}

View File

@@ -0,0 +1,56 @@
part of 'terminal_mouse_handler.dart';
const _prepareTerminalClipboardCommand = 'prepare_terminal_clipboard';
const _finishTerminalClipboardCommand = 'finish_terminal_clipboard';
const _cancelTerminalClipboardCommand = 'cancel_terminal_clipboard';
extension _TerminalWebClipboardGesture on _TerminalMouseInteractionState {
void _prepareTerminalClipboardWrite() {
if (!kIsWeb) return;
_cancelTerminalClipboardWrite();
final terminal = widget.terminal;
if (terminal is! RustDeskTerminal || !terminal.isClipboardWriteAllowed) {
return;
}
try {
ffiSetByName(_prepareTerminalClipboardCommand);
_terminalClipboardGesturePrepared = true;
} catch (error) {
debugPrint('[Terminal] Failed to prepare Web clipboard write: $error');
}
}
void _finishTerminalClipboardWrite(bool responseExpected) {
if (!_terminalClipboardGesturePrepared) return;
_terminalClipboardGesturePrepared = false;
if (!kIsWeb) return;
try {
ffiSetByName(
_finishTerminalClipboardCommand,
responseExpected ? 'true' : 'false',
);
} catch (error) {
debugPrint('[Terminal] Failed to finish Web clipboard write: $error');
}
}
void _cancelTerminalClipboardWrite() {
if (!_terminalClipboardGesturePrepared) return;
_terminalClipboardGesturePrepared = false;
_sendTerminalClipboardCancel();
}
void _discardPendingTerminalClipboardWrites() {
_cancelTerminalClipboardWrite();
_sendTerminalClipboardCancel();
}
void _sendTerminalClipboardCancel() {
if (!kIsWeb) return;
try {
ffiSetByName(_cancelTerminalClipboardCommand);
} catch (error) {
debugPrint('[Terminal] Failed to cancel Web clipboard write: $error');
}
}
}

View File

@@ -12,7 +12,7 @@ build = "build.rs"
brotli = "3.4"
dirs = "5.0"
md5 = "0.7"
winapi = { version = "0.3", features = ["winbase"] }
winapi = { version = "0.3", features = ["winbase", "libloaderapi"] }
[target.'cfg(target_os = "windows")'.dependencies]
windows = { version = "0.61", features = [

View File

@@ -15,15 +15,29 @@ encoding = 'utf-8'
# output: {path: (compressed_data, file_md5)}
def generate_md5_table(folder: str, level) -> dict:
def normalize(path: str) -> str:
path = path.replace('\\', '/')
while path.startswith('./'):
path = path[2:]
return path.lower()
def generate_md5_table(folder: str, level, exclude: str = None) -> dict:
res: dict = dict()
curdir = os.curdir
skip = normalize(exclude) if exclude else None
excluded = False
# os.curdir is the literal ".", so restoring it left us inside `folder`.
curdir = os.getcwd()
os.chdir(folder)
for root, _, files in os.walk('.'):
# remove ./
for f in files:
md5_generator = md5()
full_path = os.path.join(root, f)
if skip and normalize(full_path) == skip:
print(f"Excluding {full_path}...")
excluded = True
continue
print(f"Processing {full_path}...")
f = open(full_path, "rb")
content = f.read()
@@ -33,11 +47,16 @@ def generate_md5_table(folder: str, level) -> dict:
md5_code = md5_generator.hexdigest().encode(encoding=encoding)
res[full_path] = (content_compressed, md5_code)
os.chdir(curdir)
if skip and not excluded:
raise ValueError(f"excluded file was not found in {folder}: {exclude}")
return res
def write_package_metadata(md5_table: dict, output_folder: str, exe: str):
output_path = os.path.join(output_folder, "data.bin")
write_blob(md5_table, os.path.join(output_folder, "data.bin"), exe)
def write_blob(md5_table: dict, output_path: str, exe: str):
with open(output_path, "wb") as f:
f.write("rustdesk".encode(encoding=encoding))
for path in md5_table.keys():
@@ -92,6 +111,14 @@ if __name__ == '__main__':
help="the target used by cargo")
parser.add_option("-l", "--level", dest="level", type="int",
help="compression level, default is 11, highest", default=11)
parser.add_option("--package", dest="package",
help="write the per-customer blob to this path instead of "
"data.bin, and skip the cargo build. Injected into the "
"template's RDPKG resource so customizing needs no rebuild")
parser.add_option("--exclude-exe", dest="exclude_exe", action="store_true",
default=False,
help="omit the executable from the blob, for a template whose "
"executable ships in the package instead")
(options, args) = parser.parse_args()
folder = options.folder or './rustdesk'
output_folder = os.path.abspath(options.output_folder or './')
@@ -100,14 +127,29 @@ if __name__ == '__main__':
options.executable = 'rustdesk.exe'
if not options.executable.startswith(folder):
options.executable = folder + '/' + options.executable
# Note: the simple check `options.executable.startswith(folder)` is incorrect.
# `python generate.py -f rustdesk -e rustdesk.exe` or `python generate.py -f rustdesk`
# will result the print "Executable path: ..exe".
# So we need to check if the executable is in the folder, and if so, concat again.
if os.path.exists(os.path.join(folder, options.executable)):
options.executable = os.path.join(folder, options.executable)
folder_path = os.path.abspath(folder)
exe: str = os.path.abspath(options.executable)
if not exe.startswith(os.path.abspath(folder)):
try:
in_source_folder = os.path.commonpath([folder_path, exe]) == folder_path
except ValueError:
in_source_folder = False
if not in_source_folder:
print("The executable must locate in source folder")
exit(-1)
exe = '.' + exe[len(os.path.abspath(folder)):]
exe = '.' + exe[len(folder_path):]
print("Executable path: " + exe)
print("Compression level: " + str(options.level))
md5_table = generate_md5_table(folder, options.level)
write_package_metadata(md5_table, output_folder, exe)
write_app_metadata(output_folder)
build_portable(output_folder, options.target)
md5_table = generate_md5_table(
folder, options.level, exe if options.exclude_exe else None)
if options.package:
write_blob(md5_table, os.path.abspath(options.package), exe)
else:
write_package_metadata(md5_table, output_folder, exe)
write_app_metadata(output_folder)
build_portable(output_folder, options.target)

View File

@@ -1,15 +1,22 @@
use std::{
collections::HashSet,
fs::{self},
io::{Cursor, Read},
path::Path,
};
// The generic payload, shared by every customer and compiled in once per release.
#[cfg(windows)]
const BIN_DATA: &[u8] = include_bytes!("../data.bin");
#[cfg(not(windows))]
const BIN_DATA: &[u8] = &[];
// The per-customer payload, injected into the RCDATA resource after the template
// has been built, so that customizing a client needs no recompilation.
#[cfg(windows)]
const PACKAGE_RESOURCE_NAME: &str = "RDPKG";
// 4bytes
const LENGTH: usize = 4;
const IDENTIFIER: &[u8] = b"rustdesk";
const IDENTIFIER_LENGTH: usize = 8;
const MD5_LENGTH: usize = 32;
const BUF_SIZE: usize = 4096;
@@ -24,12 +31,172 @@ pub(crate) struct BinaryData {
pub(crate) struct BinaryReader {
pub files: Vec<BinaryData>,
pub exe: String,
// Paths supplied by the per-customer package. Recorded so that a file dropped
// from a later package -- a logo the customer removed, say -- can be deleted
// from an existing extraction, which the timestamp wipe no longer covers now
// that the packer is built once per release rather than once per customer.
pub package_paths: Vec<String>,
}
impl Default for BinaryReader {
fn default() -> Self {
let (files, exe) = BinaryReader::read();
Self { files, exe }
impl BinaryReader {
pub fn new() -> Result<Self, String> {
let package = read_package()?;
let package_paths = package.0.iter().map(|f| f.path.clone()).collect();
let (files, exe) = merge(read_embedded()?, package);
Ok(Self {
files,
exe,
package_paths,
})
}
}
// Folds the per-customer package into the generic payload.
fn merge(
embedded: (Vec<BinaryData>, String),
package: (Vec<BinaryData>, String),
) -> (Vec<BinaryData>, String) {
let (mut files, generic_exe) = embedded;
let (package_files, package_exe) = package;
let exe = if package_exe.is_empty() {
generic_exe.clone()
} else {
package_exe
};
// The generic payload ships the executable under its stock name, the package
// decides the final one. Rename on extraction so the process is always
// `<appname>.exe`, which the app itself relies on to find its own sessions.
if !generic_exe.is_empty() && normalize_path(&exe) != normalize_path(&generic_exe) {
let generic_key = normalize_path(&generic_exe);
for file in files.iter_mut() {
if normalize_path(&file.path) == generic_key {
file.path = exe.clone();
}
}
}
// Per-customer entries replace the generic ones they shadow.
if !package_files.is_empty() {
let overridden: HashSet<String> = package_files
.iter()
.map(|file| normalize_path(&file.path))
.collect();
files.retain(|file| !overridden.contains(&normalize_path(&file.path)));
files.extend(package_files);
}
(files, exe)
}
pub(crate) fn normalize_path(path: &str) -> String {
path.replace('\\', "/")
.trim_start_matches("./")
.to_lowercase()
}
fn read_u32(blob: &[u8], at: usize) -> Option<u32> {
let bytes = blob.get(at..at + LENGTH)?;
Some(u32::from_be_bytes([bytes[0], bytes[1], bytes[2], bytes[3]]))
}
// Returns the files and the executable to launch, or None if the blob is absent or malformed.
fn parse(blob: &'static [u8]) -> Option<(Vec<BinaryData>, String)> {
let mut base = 0usize;
let mut parsed = Vec::new();
if blob.get(base..base + IDENTIFIER_LENGTH)? != IDENTIFIER {
return None;
}
base += IDENTIFIER_LENGTH;
loop {
if blob.get(base..base + IDENTIFIER_LENGTH)? == IDENTIFIER {
base += IDENTIFIER_LENGTH;
break;
}
let path_length = read_u32(blob, base)? as usize;
base += LENGTH;
let path = std::str::from_utf8(blob.get(base..base + path_length)?)
.ok()?
.to_owned();
base += path_length;
let file_length = read_u32(blob, base)? as usize;
base += LENGTH;
let raw = blob.get(base..base + file_length)?;
base += file_length;
let md5_code = blob.get(base..base + MD5_LENGTH)?;
base += MD5_LENGTH;
parsed.push(BinaryData {
md5_code,
raw,
path,
});
}
let executable = std::str::from_utf8(blob.get(base..)?).ok()?.to_owned();
Some((parsed, executable))
}
#[cfg(windows)]
fn read_embedded() -> Result<(Vec<BinaryData>, String), String> {
parse(BIN_DATA).ok_or_else(|| "bin file is not valid!".to_owned())
}
#[cfg(not(windows))]
fn read_embedded() -> Result<(Vec<BinaryData>, String), String> {
Ok(Default::default())
}
fn parse_package_blob(blob: Option<&'static [u8]>) -> Result<(Vec<BinaryData>, String), String> {
let Some(blob) = blob else {
return Ok(Default::default());
};
let package = parse(blob).ok_or_else(|| "RDPKG resource is invalid".to_owned())?;
if package.1.trim().is_empty() {
return Err("RDPKG resource has no executable".to_owned());
}
Ok(package)
}
#[cfg(windows)]
fn read_package() -> Result<(Vec<BinaryData>, String), String> {
parse_package_blob(read_resource(PACKAGE_RESOURCE_NAME))
}
#[cfg(not(windows))]
fn read_package() -> Result<(Vec<BinaryData>, String), String> {
Ok(Default::default())
}
// Reads an RCDATA resource out of the running image. Resources live in the mapped
// image for the lifetime of the process, so the slice is genuinely 'static and no
// copy is needed.
#[cfg(windows)]
fn read_resource(name: &str) -> Option<&'static [u8]> {
use std::ptr::null_mut;
use winapi::um::libloaderapi::{FindResourceW, LoadResource, LockResource, SizeofResource};
// MAKEINTRESOURCEW(10), avoids depending on the winuser feature for RT_RCDATA.
const RT_RCDATA: *const u16 = 10 as _;
let name: Vec<u16> = name.encode_utf16().chain(std::iter::once(0)).collect();
unsafe {
let info = FindResourceW(null_mut(), name.as_ptr(), RT_RCDATA);
if info.is_null() {
return None;
}
let size = SizeofResource(null_mut(), info) as usize;
if size == 0 {
return None;
}
let handle = LoadResource(null_mut(), info);
if handle.is_null() {
return None;
}
let data = LockResource(handle) as *const u8;
if data.is_null() {
return None;
}
Some(std::slice::from_raw_parts(data, size))
}
}
@@ -68,59 +235,6 @@ impl BinaryData {
}
impl BinaryReader {
fn read() -> (Vec<BinaryData>, String) {
let mut base: usize = 0;
let mut parsed = vec![];
assert!(BIN_DATA.len() > IDENTIFIER_LENGTH, "bin data invalid!");
let mut iden = String::from_utf8_lossy(&BIN_DATA[base..base + IDENTIFIER_LENGTH]);
if iden != "rustdesk" {
panic!("bin file is not valid!");
}
base += IDENTIFIER_LENGTH;
loop {
iden = String::from_utf8_lossy(&BIN_DATA[base..base + IDENTIFIER_LENGTH]);
if iden == "rustdesk" {
base += IDENTIFIER_LENGTH;
break;
}
// start reading
let mut offset = 0;
let path_length = u32::from_be_bytes([
BIN_DATA[base + offset],
BIN_DATA[base + offset + 1],
BIN_DATA[base + offset + 2],
BIN_DATA[base + offset + 3],
]) as usize;
offset += LENGTH;
let path =
String::from_utf8_lossy(&BIN_DATA[base + offset..base + offset + path_length])
.to_string();
offset += path_length;
// file sz
let file_length = u32::from_be_bytes([
BIN_DATA[base + offset],
BIN_DATA[base + offset + 1],
BIN_DATA[base + offset + 2],
BIN_DATA[base + offset + 3],
]) as usize;
offset += LENGTH;
let raw = &BIN_DATA[base + offset..base + offset + file_length];
offset += file_length;
// md5
let md5 = &BIN_DATA[base + offset..base + offset + MD5_LENGTH];
offset += MD5_LENGTH;
parsed.push(BinaryData {
md5_code: md5,
raw: raw,
path: path,
});
base += offset;
}
// executable
let executable = String::from_utf8_lossy(&BIN_DATA[base..]).to_string();
(parsed, executable)
}
#[cfg(linux)]
pub fn configure_permission(&self, prefix: &Path) {
use std::os::unix::prelude::PermissionsExt;
@@ -137,3 +251,155 @@ impl BinaryReader {
}
}
}
#[cfg(test)]
mod tests {
use super::*;
// Builds a blob in the same layout generate.py writes, so these tests pin the
// cross-language format contract as well as the merge rules.
fn blob(files: &[(&str, &[u8])], exe: &str) -> &'static [u8] {
let mut out = Vec::new();
out.extend_from_slice(IDENTIFIER);
for (path, data) in files {
out.extend_from_slice(&(path.len() as u32).to_be_bytes());
out.extend_from_slice(path.as_bytes());
out.extend_from_slice(&(data.len() as u32).to_be_bytes());
out.extend_from_slice(data);
out.extend_from_slice(&[b'a'; MD5_LENGTH]);
}
out.extend_from_slice(IDENTIFIER);
out.extend_from_slice(exe.as_bytes());
Box::leak(out.into_boxed_slice())
}
fn entry<'a>(files: &'a [BinaryData], path: &str) -> Option<&'a BinaryData> {
files
.iter()
.find(|file| normalize_path(&file.path) == normalize_path(path))
}
#[test]
fn parses_the_generate_py_layout() {
let (files, exe) = parse(blob(
&[("./rustdesk.exe", b"app"), ("./custom.txt", b"cfg")],
"./rustdesk.exe",
))
.unwrap();
assert_eq!(exe, "./rustdesk.exe");
assert_eq!(files.len(), 2);
assert_eq!(entry(&files, "./custom.txt").unwrap().raw, b"cfg");
}
#[test]
fn rejects_malformed_blobs() {
assert!(parse(b"".as_slice()).is_none());
assert!(parse(b"notrustd".as_slice()).is_none());
// Truncated mid-record rather than panicking on a slice out of range.
assert!(parse(b"rustdesk\x00\x00\x00\x40partial".as_slice()).is_none());
}
#[test]
fn distinguishes_an_absent_package_from_a_malformed_one() {
assert!(parse_package_blob(None).unwrap().0.is_empty());
assert!(parse_package_blob(Some(b"damaged")).is_err());
assert!(parse_package_blob(Some(blob(&[("./custom.txt", b"cfg")], ""))).is_err());
}
#[test]
fn without_a_package_the_stock_payload_is_untouched() {
let embedded = parse(blob(&[("./rustdesk.exe", b"app")], "./rustdesk.exe")).unwrap();
let (files, exe) = merge(embedded, Default::default());
assert_eq!(exe, "./rustdesk.exe");
assert!(entry(&files, "./rustdesk.exe").is_some());
}
#[test]
fn renames_the_stock_executable_to_the_package_name() {
// x86: the big executable stays in the generic payload and only gets renamed.
let embedded = parse(blob(
&[("./rustdesk.exe", b"app"), ("./sciter.dll", b"dll")],
"./rustdesk.exe",
))
.unwrap();
let package = parse(blob(&[("./custom.txt", b"cfg")], "./acme.exe")).unwrap();
let (files, exe) = merge(embedded, package);
assert_eq!(exe, "./acme.exe");
assert!(entry(&files, "./acme.exe").is_some());
assert!(entry(&files, "./rustdesk.exe").is_none());
// Untouched neighbours survive.
assert_eq!(entry(&files, "./sciter.dll").unwrap().raw, b"dll");
assert_eq!(entry(&files, "./custom.txt").unwrap().raw, b"cfg");
}
#[test]
fn package_entries_win_over_the_generic_payload() {
// x64: the customized executable and icons ship in the package instead.
let embedded = parse(blob(
&[
("./data/flutter_assets/assets/icon.ico", b"stock-icon"),
("./librustdesk.dll", b"core"),
],
"./rustdesk.exe",
))
.unwrap();
let package = parse(blob(
&[
("./acme.exe", b"branded"),
("./data/flutter_assets/assets/icon.ico", b"acme-icon"),
],
"./acme.exe",
))
.unwrap();
let (files, exe) = merge(embedded, package);
assert_eq!(exe, "./acme.exe");
assert_eq!(
entry(&files, "./data/flutter_assets/assets/icon.ico")
.unwrap()
.raw,
b"acme-icon"
);
assert_eq!(
files
.iter()
.filter(|f| normalize_path(&f.path) == "data/flutter_assets/assets/icon.ico")
.count(),
1
);
assert_eq!(entry(&files, "./librustdesk.dll").unwrap().raw, b"core");
}
#[test]
fn package_paths_are_recorded_for_the_dropped_file_sweep() {
let package = parse(blob(
&[("./custom.txt", b"cfg"), ("./data/logo.png", b"img")],
"./acme.exe",
))
.unwrap();
let mut paths: Vec<String> = package.0.iter().map(|f| f.path.clone()).collect();
paths.sort();
assert_eq!(paths, vec!["./custom.txt", "./data/logo.png"]);
// Merging must not disturb them: the generic payload contributes none.
let embedded = parse(blob(&[("./librustdesk.dll", b"core")], "./rustdesk.exe")).unwrap();
let (files, _) = merge(embedded, package);
assert!(entry(&files, "./data/logo.png").is_some());
}
#[test]
fn matches_paths_across_separator_styles() {
// generate.py emits backslashes when it runs on Windows.
let embedded = parse(blob(&[(".\\rustdesk.exe", b"app")], ".\\rustdesk.exe")).unwrap();
let package = parse(blob(&[("./custom.txt", b"cfg")], "./acme.exe")).unwrap();
let (files, exe) = merge(embedded, package);
assert_eq!(exe, "./acme.exe");
assert!(entry(&files, "./acme.exe").is_some());
assert!(entry(&files, ".\\rustdesk.exe").is_none());
}
}

View File

@@ -5,7 +5,7 @@ use std::{
process::{Command, Stdio},
};
use bin_reader::BinaryReader;
use bin_reader::{normalize_path, BinaryReader};
pub mod bin_reader;
#[cfg(windows)]
@@ -17,11 +17,24 @@ const APP_METADATA: &[u8] = include_bytes!("../app_metadata.toml");
const APP_METADATA: &[u8] = &[];
const APP_METADATA_CONFIG: &str = "meta.toml";
const META_LINE_PREFIX_TIMESTAMP: &str = "timestamp = ";
const META_LINE_PREFIX_FILE: &str = "file = ";
const APP_PREFIX: &str = "rustdesk";
const APPNAME_RUNTIME_ENV_KEY: &str = "RUSTDESK_APPNAME";
#[cfg(windows)]
const SET_FOREGROUND_WINDOW_ENV_KEY: &str = "SET_FOREGROUND_WINDOW";
// The extraction directory follows whatever executable the payload asks for, so a
// custom client gets its own directory instead of sharing RustDesk's. Falls back to
// APP_PREFIX when no package is injected, which keeps stock builds unchanged.
fn app_dir_name(exe: &str) -> String {
Path::new(&exe.replace('\\', "/"))
.file_stem()
.and_then(|stem| stem.to_str())
.map(|stem| stem.trim().to_lowercase())
.filter(|stem| !stem.is_empty())
.unwrap_or_else(|| APP_PREFIX.to_owned())
}
fn is_timestamp_matches(dir: &Path, ts: &mut u64) -> bool {
let Ok(app_metadata) = std::str::from_utf8(APP_METADATA) else {
return true;
@@ -50,13 +63,93 @@ fn is_timestamp_matches(dir: &Path, ts: &mut u64) -> bool {
false
}
fn write_meta(dir: &Path, ts: u64) {
fn write_meta(dir: &Path, ts: u64, package_paths: &[String]) {
let meta_file = dir.join(APP_METADATA_CONFIG);
if ts != 0 {
let content = format!("{}{}", META_LINE_PREFIX_TIMESTAMP, ts);
// Ignore is ok here
let _ = std::fs::write(meta_file, content);
let mut content = format!("{}{}\n", META_LINE_PREFIX_TIMESTAMP, ts);
for path in package_paths {
content.push_str(&format!("{}{}\n", META_LINE_PREFIX_FILE, path));
}
// Ignore is ok here
let _ = std::fs::write(meta_file, content);
}
fn previous_package_files(dir: &Path) -> Vec<String> {
let Ok(content) = std::fs::read_to_string(dir.join(APP_METADATA_CONFIG)) else {
return Vec::new();
};
content
.lines()
.filter_map(|line| line.strip_prefix(META_LINE_PREFIX_FILE))
.map(|path| path.trim().to_owned())
.collect()
}
// meta.toml is plain text in a user-writable directory, and it now drives deletion,
// so the path is rebuilt from plain components rather than joined as written. A
// prefix, root or parent component would otherwise escape the extraction directory:
// Path::join replaces the base entirely when given an absolute path.
fn resolve_within(dir: &Path, relative: &str) -> Option<PathBuf> {
use std::path::Component;
let mut path = dir.to_path_buf();
let mut any = false;
for component in Path::new(&relative.replace('\\', "/")).components() {
match component {
Component::Normal(part) => {
// A drive-relative name like "C:x" parses as Normal, and only a
// Windows host would classify "C:/..." as a Prefix, so the colon is
// rejected outright rather than relying on the host's parser.
if part.to_string_lossy().contains(':') {
return None;
}
path.push(part);
any = true;
}
Component::CurDir => {}
_ => return None,
}
}
if any {
Some(path)
} else {
None
}
}
// A customer who drops a branding asset gets a package without it, and the file
// would otherwise linger in an existing extraction and keep being used. The wipe
// cannot cover this: it is keyed on the packer's build timestamp, which is now the
// same for every customer of a release.
fn remove_dropped_package_files_with<F>(
dir: &Path,
current: &[String],
mut remove_file: F,
) -> Vec<String>
where
F: FnMut(&Path) -> std::io::Result<()>,
{
let keep: std::collections::HashSet<String> =
current.iter().map(|p| normalize_path(p)).collect();
let mut failed = Vec::new();
for previous in previous_package_files(dir) {
if keep.contains(&normalize_path(&previous)) {
continue;
}
let Some(path) = resolve_within(dir, &previous) else {
continue;
};
if path.is_file() {
println!("removing dropped {}", previous);
if let Err(error) = remove_file(&path) {
eprintln!("failed to remove dropped {}: {}", previous, error);
failed.push(previous);
}
}
}
failed
}
fn remove_dropped_package_files(dir: &Path, current: &[String]) -> Vec<String> {
remove_dropped_package_files_with(dir, current, |path| std::fs::remove_file(path))
}
fn setup(
@@ -71,7 +164,7 @@ fn setup(
} else {
// home dir
if let Some(dir) = dirs::data_local_dir() {
dir.join(APP_PREFIX)
dir.join(app_dir_name(&reader.exe))
} else {
eprintln!("not found data local dir");
return None;
@@ -87,10 +180,12 @@ fn setup(
}
std::fs::remove_dir_all(&dir).ok();
}
let mut metadata_paths = reader.package_paths.clone();
metadata_paths.extend(remove_dropped_package_files(&dir, &reader.package_paths));
for file in reader.files.iter() {
file.write_to_file(&dir);
}
write_meta(&dir, ts);
write_meta(&dir, ts, &metadata_paths);
#[cfg(windows)]
win::copy_runtime_broker(&dir);
#[cfg(linux)]
@@ -174,7 +269,7 @@ fn execute(path: PathBuf, args: Vec<String>, _ui: bool) {
}
}
fn main() {
fn main() -> Result<(), String> {
let mut args = Vec::new();
let mut arg_exe = Default::default();
let mut i = 0;
@@ -193,7 +288,7 @@ fn main() {
let quick_support = false;
let mut ui = false;
let reader = BinaryReader::default();
let reader = BinaryReader::new()?;
if let Some(exe) = setup(
reader,
None,
@@ -208,6 +303,7 @@ fn main() {
}
execute(exe, args, ui);
}
Ok(())
}
#[cfg(windows)]
@@ -246,3 +342,27 @@ mod win {
exe.contains("-qs-") || exe.contains("-qs.exe") || exe.contains("_qs.exe")
}
}
#[cfg(test)]
mod meta_tests {
use super::*;
#[test]
fn resolve_within_rejects_paths_that_escape() {
let base = Path::new("/base");
assert_eq!(
resolve_within(base, "./data/logo.png"),
Some(base.join("data").join("logo.png"))
);
assert_eq!(
resolve_within(base, ".\\data\\logo.png"),
Some(base.join("data").join("logo.png"))
);
// meta.toml is user-writable, so these must not reach remove_file.
assert_eq!(resolve_within(base, "../../etc/passwd"), None);
assert_eq!(resolve_within(base, "/etc/passwd"), None);
assert_eq!(resolve_within(base, "C:\\Windows\\System32\\x.dll"), None);
assert_eq!(resolve_within(base, "."), None);
assert_eq!(resolve_within(base, ""), None);
}
}

View File

@@ -143,7 +143,7 @@ fn test_vpx(
println!(
"{:?} encode: {:?}, {} byte",
codec_id,
time_sum / yuv_count as u32,
time_sum / yuv_count as _,
size / yuv_count
);
@@ -156,7 +156,7 @@ fn test_vpx(
println!(
"{:?} decode: {:?}",
codec_id,
start.elapsed() / yuv_count as u32
start.elapsed() / yuv_count as _
);
}
@@ -212,7 +212,7 @@ fn test_av1(
assert_eq!(av1s.len(), yuv_count);
println!(
"AV1 encode: {:?}, {} byte",
time_sum / yuv_count as u32,
time_sum / yuv_count as _,
size / yuv_count
);
let mut decoder = AomDecoder::new().unwrap();
@@ -221,7 +221,7 @@ fn test_av1(
let _ = decoder.decode(&av1);
let _ = decoder.flush();
}
println!("AV1 decode: {:?}", start.elapsed() / yuv_count as u32);
println!("AV1 decode: {:?}", start.elapsed() / yuv_count as _);
}
#[cfg(feature = "hwcodec")]

View File

@@ -132,7 +132,15 @@ impl Display {
.map(Display)
.collect::<Vec<_>>();
let displays_dxgi = Self::all_().unwrap_or(Default::default());
let mut displays_dxgi = match Self::all_() {
Ok(displays) => displays,
Err(e) => {
hbb_common::log::error!("DXGI display enumeration failed: {e}");
Vec::new()
}
};
// Win+P "Show only on 1/2" still enumerates detached DXGI outputs.
displays_dxgi.retain(|d| d.is_online() && d.width() > 0 && d.height() > 0);
// Return gdi displays if dxgi is not supported
if displays_dxgi.is_empty() {
@@ -155,7 +163,6 @@ impl Display {
}
// Reorder displays from dxgi
let mut displays_dxgi = displays_dxgi;
let mut displays_dxgi_ordered = Vec::new();
for name in names_gdi.iter() {
let pos = match displays_dxgi.iter().position(|d| d.name() == *name) {
@@ -176,11 +183,11 @@ impl Display {
}
pub fn width(&self) -> usize {
self.0.width() as usize
self.0.width().max(0) as usize
}
pub fn height(&self) -> usize {
self.0.height() as usize
self.0.height().max(0) as usize
}
pub fn name(&self) -> String {
@@ -201,7 +208,8 @@ impl Display {
pub fn is_primary(&self) -> bool {
// https://docs.microsoft.com/en-us/windows/win32/api/wingdi/ns-wingdi-devmodea
self.origin() == (0, 0)
// Detached outputs can still report origin (0,0) with a zero size.
self.origin() == (0, 0) && self.width() > 0 && self.height() > 0
}
#[cfg(feature = "vram")]

View File

@@ -297,6 +297,30 @@ pub fn clear_wayland_displays_cache() {
// capturer rebuild loop clears about once a second.
}
// Bumped ONLY by the layout-drift edge in display_service (its single owner), never by cache
// clears: session inits and hotplug workers clear the cache too, and a bump there tears down
// every OTHER live capturer on a multi-display session. A capturer records this at build and
// treats a later bump as "the layout changed under me, rebuild" — the only trigger a rotation
// has, since it changes neither the CRTC mode nor the framebuffer size (rustdesk#15886).
static SNAPSHOT_GENERATION: std::sync::atomic::AtomicU64 = std::sync::atomic::AtomicU64::new(0);
/// Whether no snapshot has been cached: the signature of an enumeration that failed at session
/// build (an `Err` is deliberately not cached), as opposed to a session that started healthy.
#[cfg(feature = "drm")]
pub fn wayland_snapshot_missing() -> bool {
DISPLAYS.lock().unwrap().is_none()
}
#[cfg(any(test, feature = "drm"))]
pub fn bump_layout_generation() {
SNAPSHOT_GENERATION.fetch_add(1, std::sync::atomic::Ordering::Release);
}
#[cfg(feature = "drm")]
pub fn wayland_snapshot_generation() -> u64 {
SNAPSHOT_GENERATION.load(std::sync::atomic::Ordering::Acquire)
}
// Return (min_x, max_x, min_y, max_y)
pub fn get_desktop_rect_for_uinput() -> Option<(i32, i32, i32, i32)> {
let wayland_displays = get_displays();
@@ -332,7 +356,8 @@ fn desktop_rect_of(displays: &[WaylandDisplayInfo]) -> Option<(i32, i32, i32, i3
// Otherwise, we use the logical size for `uinput`.
if displays.len() == 1 {
let d = &displays[0];
return Some((d.x, d.x + d.width, d.y, d.y + d.height));
let (w, h) = oriented_physical(d);
return Some((d.x, d.x + w, d.y, d.y + h));
}
let mut min_x = i32::MAX;
@@ -344,6 +369,8 @@ fn desktop_rect_of(displays: &[WaylandDisplayInfo]) -> Option<(i32, i32, i32, i3
min_y = min_y.min(d.y);
let size = if let Some(logical_size) = d.logical_size {
logical_size
} else if d.transform == 90 || d.transform == 270 {
oriented_physical(d)
} else {
// When `logical_size` is None, we cannot obtain the correct desktop rectangle.
// This may occur if the Wayland compositor does not provide logical size information,
@@ -374,6 +401,24 @@ pub struct DisplayRect {
pub y: i32,
pub w: i32,
pub h: i32,
// Carried so the drift comparison sees 0<->180 and 90<->270 flips, whose rects are
// otherwise identical; the remap itself matches by name and containment, never by this.
pub transform: i32,
}
/// Physical size in delivered orientation: a 90/270 output scans out WxH but is captured,
/// advertised and pointed at as HxW.
fn oriented_physical(d: &WaylandDisplayInfo) -> (i32, i32) {
if d.transform == 90 || d.transform == 270 {
(d.height, d.width)
} else {
(d.width, d.height)
}
}
/// The logical rectangles of a display list, for a caller that already has the list.
pub fn logical_rects_of_displays(displays: &[WaylandDisplayInfo]) -> Vec<DisplayRect> {
logical_rects_of(displays)
}
fn logical_rects_of(displays: &[WaylandDisplayInfo]) -> Vec<DisplayRect> {
@@ -386,9 +431,9 @@ fn logical_rects_of(displays: &[WaylandDisplayInfo]) -> Vec<DisplayRect> {
.iter()
.map(|d| {
let (w, h) = if single {
(d.width, d.height)
oriented_physical(d)
} else {
d.logical_size.unwrap_or((d.width, d.height))
d.logical_size.unwrap_or_else(|| oriented_physical(d))
};
DisplayRect {
name: d.name.clone(),
@@ -396,6 +441,7 @@ fn logical_rects_of(displays: &[WaylandDisplayInfo]) -> Vec<DisplayRect> {
y: d.y,
w,
h,
transform: d.transform,
}
})
.collect()
@@ -495,8 +541,8 @@ mod tests {
#[test]
fn test_clear_keeps_the_failure_stamp() {
// The stamp describes the seat, not the cache: the ~1/s capturer rebuild loop clears,
// and dropping the stamp with it would defeat the backoff. Sole test touching these
// statics; serialize before adding another.
// and dropping the stamp with it would defeat the backoff. The generation test also
// calls clear now; both only assert monotonic/unchanged state, so they can interleave.
*LAST_FAILED_LOOKUP.lock().unwrap() = Some(Instant::now());
clear_wayland_displays_cache();
let stamp = *LAST_FAILED_LOOKUP.lock().unwrap();
@@ -519,6 +565,7 @@ mod tests {
height,
logical_size,
refresh_rate: 60,
transform: 0,
}
}
@@ -553,6 +600,42 @@ mod tests {
assert_eq!(desktop_rect_of(&displays), Some((0, 5120, 0, 1440)));
}
#[test]
fn a_single_rotated_display_swaps_the_uinput_rect() {
// Review finding 1 on rustdesk#15889: the single-display branch served the unrotated
// mode, so the pointer could not reach ~44% of a portrait screen.
let mut d = display(0, 0, 1920, 1080, None);
d.transform = 90;
assert_eq!(desktop_rect_of(&[d.clone()]), Some((0, 1080, 0, 1920)));
let rects = logical_rects_of(&[d]);
assert_eq!((rects[0].w, rects[0].h), (1080, 1920));
}
#[test]
fn a_transform_flip_is_visible_to_the_drift_comparison() {
// Review finding 5: 0<->180 and 90<->270 leave every rect identical; the transform
// field is what lets `baseline != live` fire on them.
let mut a = display(0, 0, 1920, 1080, Some((1920, 1080)));
let mut b = a.clone();
a.transform = 90;
b.transform = 270;
assert_ne!(logical_rects_of(&[a.clone(), a.clone()]), logical_rects_of(&[b.clone(), b]));
}
#[test]
fn only_the_explicit_bump_moves_the_generation() {
// A cache clear must NOT bump: session inits clear too, and a bump there rebuilds
// every other live capturer (adversarial finding on the first version of this).
let before = SNAPSHOT_GENERATION.load(std::sync::atomic::Ordering::Acquire);
clear_wayland_displays_cache();
assert_eq!(
SNAPSHOT_GENERATION.load(std::sync::atomic::Ordering::Acquire),
before
);
bump_layout_generation();
assert!(SNAPSHOT_GENERATION.load(std::sync::atomic::Ordering::Acquire) > before);
}
fn rect(name: &str, x: i32, y: i32, w: i32, h: i32) -> DisplayRect {
DisplayRect {
name: name.to_owned(),
@@ -560,6 +643,7 @@ mod tests {
y,
w,
h,
transform: 0,
}
}

417
res/admin-roles.py Executable file
View File

@@ -0,0 +1,417 @@
#!/usr/bin/env python3
import argparse
import json
import requests
ROLE_TYPES = {
"global": 1,
"individual": 2,
"group": 3,
}
PERMISSION_IDS = {
"users.view": 0x0101,
"users.create": 0x0103,
"users.invite": 0x0104,
"users.delete": 0x0105,
"users.enable_disable": 0x0106,
"users.edit_email": 0x0107,
"users.edit_password": 0x0108,
"users.edit_note": 0x0109,
"users.manage_2fa": 0x010A,
"users.force_logout": 0x010B,
"users.change_group": 0x010C,
"users.change_strategy": 0x010D,
"users.change_control_role": 0x010E,
"users.edit_display_name": 0x010F,
"devices.view": 0x0201,
"devices.enable_disable": 0x0203,
"devices.delete": 0x0204,
"devices.edit_info": 0x0205,
"devices.assign_to_user": 0x0206,
"devices.change_group": 0x0207,
"devices.change_strategy": 0x0208,
"user_groups.view": 0x0301,
"user_groups.edit": 0x0302,
"device_groups.view": 0x0401,
"device_groups.edit": 0x0402,
"device_groups.change_strategy": 0x0403,
"audits.view": 0x0501,
"audits.edit": 0x0502,
"strategies.view": 0x0601,
"strategies.edit": 0x0602,
"custom_clients.view": 0x0701,
"custom_clients.edit": 0x0702,
"control_roles.view": 0x0801,
"control_roles.edit": 0x0802,
}
PERMISSION_NAMES = {permission_id: name for name, permission_id in PERMISSION_IDS.items()}
def check_response(response):
if response.status_code != 200:
print(f"Error: HTTP {response.status_code}: {response.text}")
exit(1)
if response.text and response.text.strip():
try:
data = response.json()
except ValueError:
return response.text
if isinstance(data, dict) and "error" in data:
print(f"Error: {data['error']}")
exit(1)
return data
return None
def headers_with(token):
return {"Authorization": f"Bearer {token}", "Content-Type": "application/json"}
def split_csv(value):
if value is None:
return None
return [item.strip() for item in value.split(",") if item.strip()]
def parse_permissions(value):
permissions = []
for item in split_csv(value) or []:
permission = PERMISSION_IDS.get(item.lower())
if permission is None:
try:
permission = int(item, 0)
except ValueError:
print(f"Error: Invalid permission name or ID '{item}'")
exit(1)
if permission < 0 or permission > 65535:
print(f"Error: Permission ID '{item}' is outside the 0-65535 range")
exit(1)
permissions.append(permission)
return permissions
def format_role_permissions(role):
permissions = role.get("permissions")
if isinstance(permissions, list):
role["permissions"] = [
PERMISSION_NAMES.get(permission, permission) for permission in permissions
]
return role
def list_roles(url, token, name=None, role_type=None, page_size=50):
params = {"pageSize": page_size}
if name is not None:
params["name"] = name
if role_type is not None:
params["type"] = ROLE_TYPES[role_type]
roles = []
current = 0
while True:
current += 1
params["current"] = current
response = requests.get(
f"{url}/api/admin-roles", headers=headers_with(token), params=params
)
data = check_response(response)
if not isinstance(data, dict):
print("Error: Unexpected response while listing admin roles")
exit(1)
rows = data.get("data", [])
roles.extend(format_role_permissions(role) for role in rows)
total = data.get("total", 0)
if len(rows) < page_size or current * page_size >= total:
break
return roles
def get_role(url, token, name=None, guid=None):
if guid:
response = requests.get(
f"{url}/api/admin-roles/{guid}", headers=headers_with(token)
)
role = check_response(response)
if isinstance(role, dict):
return format_role_permissions(role)
return role
roles = list_roles(url, token, name=name)
for role in roles:
if role.get("name") == name:
return role
return None
def resolve_role(url, token, name=None, guid=None):
role = get_role(url, token, name=name, guid=guid)
if role:
return role
target = guid if guid else name
print(f"Error: Admin role '{target}' not found")
exit(1)
def get_user_guid(url, token, name):
response = requests.get(
f"{url}/api/users",
headers=headers_with(token),
params={"name": name, "pageSize": 50, "current": 1},
)
data = check_response(response)
users = data.get("data", []) if isinstance(data, dict) else []
for user in users:
if user.get("name") == name:
return user.get("guid")
return None
def resolve_users(url, token, users):
guids = []
for user in users:
if len(user) == 36 and user.count("-") == 4:
guids.append(user)
continue
guid = get_user_guid(url, token, user)
if not guid:
print(f"Error: User '{user}' not found")
exit(1)
guids.append(guid)
return guids
def create_role(
url,
token,
name,
role_type,
permissions,
note=None,
user_groups=None,
device_groups=None,
unassigned=None,
):
payload = {
"name": name,
"type": ROLE_TYPES[role_type],
"permissions": permissions,
}
if note is not None:
payload["note"] = note
if user_groups:
payload["user_groups"] = user_groups
if device_groups:
payload["device_groups"] = device_groups
if unassigned is not None:
payload["unassigned"] = unassigned
response = requests.post(
f"{url}/api/admin-roles", headers=headers_with(token), json=payload
)
check_response(response)
def update_role(
url,
token,
guid,
new_name=None,
note=None,
permissions=None,
user_groups=None,
device_groups=None,
unassigned=None,
):
payload = {}
if new_name is not None:
payload["name"] = new_name
if note is not None:
payload["note"] = note
if permissions is not None:
payload["permissions"] = permissions
if user_groups is not None:
payload["user_groups"] = user_groups
if device_groups is not None:
payload["device_groups"] = device_groups
if unassigned is not None:
payload["unassigned"] = unassigned
response = requests.put(
f"{url}/api/admin-roles/{guid}", headers=headers_with(token), json=payload
)
check_response(response)
def delete_roles(url, token, guids):
response = requests.delete(
f"{url}/api/admin-roles",
headers=headers_with(token),
json={"guids": guids},
)
check_response(response)
def change_users(url, token, guid, users, remove=False):
method = requests.delete if remove else requests.post
response = method(
f"{url}/api/admin-roles/{guid}/users",
headers=headers_with(token),
json={"users": users},
)
check_response(response)
def view_users(url, token, role_guid, page_size=50):
params = {"admin_role_guid": role_guid, "pageSize": page_size}
users = []
current = 0
while True:
current += 1
params["current"] = current
response = requests.get(
f"{url}/api/users", headers=headers_with(token), params=params
)
data = check_response(response)
if not isinstance(data, dict):
print("Error: Unexpected response while listing users")
exit(1)
rows = data.get("data", [])
users.extend(rows)
total = data.get("total", 0)
if len(rows) < page_size or current * page_size >= total:
break
return users
def require_role_target(parser, args):
if not args.name and not args.guid:
parser.error("one of --name or --guid is required")
def main():
parser = argparse.ArgumentParser(description="Admin role manager")
parser.add_argument(
"command",
choices=["view", "add", "update", "delete", "view-users", "add-users", "remove-users"],
)
parser.add_argument("--url", required=True, help="Server URL")
parser.add_argument("--token", required=True, help="API token")
parser.add_argument("--name", help="Admin role name")
parser.add_argument("--guid", help="Admin role GUID")
parser.add_argument("--new-name", help="New admin role name")
parser.add_argument("--note", help="Role note; use an empty value to clear it")
parser.add_argument("--type", choices=ROLE_TYPES, help="Role type")
parser.add_argument(
"--permissions",
help="Comma-separated permission names or numeric IDs; use an empty value to clear",
)
parser.add_argument(
"--user-groups",
help="Comma-separated user group names; use an empty value to clear",
)
parser.add_argument(
"--device-groups",
help="Comma-separated device group names; use an empty value to clear",
)
parser.add_argument("--users", help="Comma-separated user names or GUIDs")
unassigned = parser.add_mutually_exclusive_group()
unassigned.add_argument(
"--unassigned", dest="unassigned", action="store_true", help="Include unassigned devices"
)
unassigned.add_argument(
"--no-unassigned",
dest="unassigned",
action="store_false",
help="Exclude unassigned devices",
)
parser.set_defaults(unassigned=None)
args = parser.parse_args()
args.url = args.url.rstrip("/")
if args.command == "view":
if args.guid:
result = resolve_role(args.url, args.token, guid=args.guid)
else:
result = list_roles(args.url, args.token, args.name, args.type)
print(json.dumps(result, indent=2))
return
if args.command == "add":
if not args.name or not args.type or args.permissions is None:
parser.error("--name, --type, and --permissions are required for add")
if args.type != "group" and (
args.user_groups is not None
or args.device_groups is not None
or args.unassigned is not None
):
parser.error("group scope options can only be used with --type group")
create_role(
args.url,
args.token,
args.name,
args.type,
parse_permissions(args.permissions),
args.note,
split_csv(args.user_groups),
split_csv(args.device_groups),
args.unassigned,
)
print(f"Success: Created admin role '{args.name}'")
return
require_role_target(parser, args)
role = resolve_role(args.url, args.token, args.name, args.guid)
role_guid = role.get("guid")
role_name = role.get("name")
if args.command == "update":
updates = [
args.new_name,
args.note,
args.permissions,
args.user_groups,
args.device_groups,
args.unassigned,
]
if all(value is None for value in updates):
parser.error("at least one update option is required")
if role.get("type") != ROLE_TYPES["group"] and (
args.user_groups is not None
or args.device_groups is not None
or args.unassigned is not None
):
parser.error("group scope options can only be used with a group role")
update_role(
args.url,
args.token,
role_guid,
args.new_name,
args.note,
parse_permissions(args.permissions) if args.permissions is not None else None,
split_csv(args.user_groups),
split_csv(args.device_groups),
args.unassigned,
)
print(f"Success: Updated admin role '{role_name}'")
elif args.command == "delete":
delete_roles(args.url, args.token, [role_guid])
print(f"Success: Deleted admin role '{role_name}'")
elif args.command == "view-users":
print(json.dumps(view_users(args.url, args.token, role_guid), indent=2))
elif args.command in ("add-users", "remove-users"):
users = split_csv(args.users)
if not users:
parser.error("--users is required for add-users and remove-users")
user_guids = resolve_users(args.url, args.token, users)
remove = args.command == "remove-users"
change_users(args.url, args.token, role_guid, user_guids, remove=remove)
action = "Removed users from" if remove else "Added users to"
print(f"Success: {action} admin role '{role_name}'")
if __name__ == "__main__":
main()

292
res/control-roles.py Executable file
View File

@@ -0,0 +1,292 @@
#!/usr/bin/env python3
import argparse
import json
import requests
STATUSES = {
"disabled": 0,
"enabled": 1,
}
def check_response(response):
if response.status_code != 200:
print(f"Error: HTTP {response.status_code}: {response.text}")
exit(1)
if response.text and response.text.strip():
try:
data = response.json()
except ValueError:
return response.text
if isinstance(data, dict) and "error" in data:
print(f"Error: {data['error']}")
exit(1)
return data
return None
def headers_with(token):
return {"Authorization": f"Bearer {token}", "Content-Type": "application/json"}
def split_csv(value):
if value is None:
return None
return [item.strip() for item in value.split(",") if item.strip()]
def list_roles(url, token, name=None, status=None, page_size=50):
params = {"pageSize": page_size}
if name is not None:
params["name"] = name
if status is not None:
params["status"] = STATUSES[status]
roles = []
current = 0
while True:
current += 1
params["current"] = current
response = requests.get(
f"{url}/api/control-roles", headers=headers_with(token), params=params
)
data = check_response(response)
if not isinstance(data, dict):
print("Error: Unexpected response while listing control roles")
exit(1)
rows = data.get("data", [])
for role in rows:
role.pop("info", None)
roles.extend(rows)
total = data.get("total", 0)
if len(rows) < page_size or current * page_size >= total:
break
return roles
def get_role(url, token, name=None, guid=None):
if guid:
response = requests.get(
f"{url}/api/control-roles/{guid}", headers=headers_with(token)
)
role = check_response(response)
if isinstance(role, dict):
role.pop("info", None)
return role
roles = list_roles(url, token, name=name)
for role in roles:
if role.get("name") == name:
return role
return None
def resolve_role(url, token, name=None, guid=None):
role = get_role(url, token, name=name, guid=guid)
if role:
return role
target = guid if guid else name
print(f"Error: Control role '{target}' not found")
exit(1)
def get_user_guid(url, token, name):
response = requests.get(
f"{url}/api/users",
headers=headers_with(token),
params={"name": name, "pageSize": 50, "current": 1},
)
data = check_response(response)
users = data.get("data", []) if isinstance(data, dict) else []
for user in users:
if user.get("name") == name:
return user.get("guid")
return None
def resolve_users(url, token, users):
guids = []
for user in users:
if len(user) == 36 and user.count("-") == 4:
guids.append(user)
continue
guid = get_user_guid(url, token, user)
if not guid:
print(f"Error: User '{user}' not found")
exit(1)
guids.append(guid)
return guids
def create_role(url, token, name, note=None):
payload = {"name": name}
if note is not None:
payload["note"] = note
response = requests.post(
f"{url}/api/control-roles", headers=headers_with(token), json=payload
)
check_response(response)
def update_role(url, token, guid, new_name=None, note=None):
payload = {}
if new_name is not None:
payload["name"] = new_name
if note is not None:
payload["note"] = note
response = requests.put(
f"{url}/api/control-roles/{guid}", headers=headers_with(token), json=payload
)
check_response(response)
def delete_roles(url, token, guids):
response = requests.delete(
f"{url}/api/control-roles",
headers=headers_with(token),
json={"guids": guids},
)
check_response(response)
def set_status(url, token, guids, disable):
response = requests.put(
f"{url}/api/control-roles/enable",
headers=headers_with(token),
json={"guids": guids, "disable": disable},
)
check_response(response)
def change_users(url, token, guid, users, remove=False):
if remove:
endpoint = f"{url}/api/control-roles/users"
response = requests.delete(
endpoint,
headers=headers_with(token),
json={"user_guids": users},
)
else:
endpoint = f"{url}/api/control-roles/{guid}/users"
response = requests.post(
endpoint,
headers=headers_with(token),
json={"user_guids": users},
)
check_response(response)
def view_users(url, token, role_guid, page_size=50):
params = {"control_role_guid": role_guid, "pageSize": page_size}
users = []
current = 0
while True:
current += 1
params["current"] = current
response = requests.get(
f"{url}/api/users", headers=headers_with(token), params=params
)
data = check_response(response)
if not isinstance(data, dict):
print("Error: Unexpected response while listing users")
exit(1)
rows = data.get("data", [])
users.extend(rows)
total = data.get("total", 0)
if len(rows) < page_size or current * page_size >= total:
break
return users
def require_role_target(parser, args):
if not args.name and not args.guid:
parser.error("one of --name or --guid is required")
def main():
parser = argparse.ArgumentParser(
description="Control role manager (configure control permissions in the web console)"
)
parser.add_argument(
"command",
choices=[
"view",
"add",
"update",
"delete",
"enable",
"disable",
"view-users",
"assign-users",
"remove-users",
],
)
parser.add_argument("--url", required=True, help="Server URL")
parser.add_argument("--token", required=True, help="API token")
parser.add_argument("--name", help="Control role name")
parser.add_argument("--guid", help="Control role GUID")
parser.add_argument("--new-name", help="New control role name")
parser.add_argument("--note", help="Role note; use an empty value to clear it")
parser.add_argument("--status", choices=STATUSES, help="Status filter for view")
parser.add_argument("--users", help="Comma-separated user names or GUIDs")
args = parser.parse_args()
args.url = args.url.rstrip("/")
if args.command == "view":
if args.guid:
result = resolve_role(args.url, args.token, guid=args.guid)
else:
result = list_roles(args.url, args.token, args.name, args.status)
print(json.dumps(result, indent=2))
return
if args.command == "add":
if not args.name:
parser.error("--name is required for add")
create_role(args.url, args.token, args.name, args.note)
print(f"Success: Created control role '{args.name}'")
return
if args.command == "remove-users":
users = split_csv(args.users)
if not users:
parser.error("--users is required for remove-users")
user_guids = resolve_users(args.url, args.token, users)
change_users(args.url, args.token, None, user_guids, remove=True)
print("Success: Removed users from their control roles")
return
require_role_target(parser, args)
role = resolve_role(args.url, args.token, args.name, args.guid)
role_guid = role.get("guid")
role_name = role.get("name")
if args.command == "update":
if args.new_name is None and args.note is None:
parser.error("--new-name or --note is required for update")
update_role(args.url, args.token, role_guid, args.new_name, args.note)
print(f"Success: Updated control role '{role_name}'")
elif args.command == "delete":
delete_roles(args.url, args.token, [role_guid])
print(f"Success: Deleted control role '{role_name}'")
elif args.command in ("enable", "disable"):
disable = args.command == "disable"
set_status(args.url, args.token, [role_guid], disable)
print(f"Success: {args.command.title()}d control role '{role_name}'")
elif args.command == "view-users":
print(json.dumps(view_users(args.url, args.token, role_guid), indent=2))
elif args.command == "assign-users":
users = split_csv(args.users)
if not users:
parser.error("--users is required for assign-users")
user_guids = resolve_users(args.url, args.token, users)
change_users(args.url, args.token, role_guid, user_guids)
print(f"Success: Assigned users to control role '{role_name}'")
if __name__ == "__main__":
main()

View File

@@ -18,6 +18,9 @@ void UninstallDriver(LPCWSTR hardwareId, BOOL &rebootRequired);
namespace RemotePrinter
{
VOID installUpdatePrinter(const std::wstring& installFolder);
VOID uninstallPrinter();
// `appName` names the printer and its port. It is passed in rather than compiled
// in so that a single dll serves every custom client; an empty value keeps the
// stock "RustDesk Printer" name.
VOID installUpdatePrinter(const std::wstring& installFolder, const std::wstring& appName);
VOID uninstallPrinter(const std::wstring& appName);
}

View File

@@ -300,7 +300,7 @@ bool TerminateProcessesByNameW(LPCWSTR processName, LPCWSTR excludeParam)
{
do
{
if (lstrcmpW(processName, processEntry.szExeFile) == 0)
if (lstrcmpiW(processName, processEntry.szExeFile) == 0)
{
HANDLE process = OpenProcess(PROCESS_TERMINATE | PROCESS_QUERY_INFORMATION | PROCESS_VM_READ, FALSE, processEntry.th32ProcessID);
if (process != NULL)
@@ -1021,9 +1021,9 @@ UINT __stdcall InstallPrinter(
DWORD er = ERROR_SUCCESS;
int nResult = 0;
LPWSTR installFolder = NULL;
LPWSTR pwz = NULL;
LPWSTR pwzData = NULL;
std::wstring appNameValue;
std::wstring installFolderValue;
hr = WcaInitialize(hInstall, "InstallPrinter");
ExitOnFailure(hr, "Failed to initialize");
@@ -1031,12 +1031,27 @@ UINT __stdcall InstallPrinter(
hr = WcaGetProperty(L"CustomActionData", &pwzData);
ExitOnFailure(hr, "failed to get CustomActionData");
pwz = pwzData;
hr = WcaReadStringFromCaData(&pwz, &installFolder);
ExitOnFailure(hr, "failed to read database key from custom action data: %ls", pwz);
// "<app name>|<install folder>". Split here rather than through
// WcaReadStringFromCaData, whose delimiter is a literal wide char 128 that a
// Formatted property value cannot carry.
{
std::wstring data(pwzData);
size_t separator = data.find(L'|');
if (separator == std::wstring::npos)
{
// A package built before the name was passed in; keep the stock name.
appNameValue.clear();
installFolderValue = data;
}
else
{
appNameValue = data.substr(0, separator);
installFolderValue = data.substr(separator + 1);
}
}
WcaLog(LOGMSG_STANDARD, "Try to install RD printer in : %ls", installFolder);
RemotePrinter::installUpdatePrinter(installFolder);
WcaLog(LOGMSG_STANDARD, "Try to install RD printer in : %ls", installFolderValue.c_str());
RemotePrinter::installUpdatePrinter(installFolderValue, appNameValue);
WcaLog(LOGMSG_STANDARD, "Install RD printer done");
LExit:
@@ -1054,14 +1069,30 @@ UINT __stdcall UninstallPrinter(
HRESULT hr = S_OK;
DWORD er = ERROR_SUCCESS;
LPWSTR pwzData = NULL;
std::wstring appNameValue;
hr = WcaInitialize(hInstall, "UninstallPrinter");
ExitOnFailure(hr, "Failed to initialize");
// Must match the name install used, otherwise the printer is left behind. Absent
// on packages built before this was passed in, where it was the stock name.
hr = WcaGetProperty(L"CustomActionData", &pwzData);
ExitOnFailure(hr, "failed to get CustomActionData");
if (pwzData)
{
appNameValue = pwzData;
}
WcaLog(LOGMSG_STANDARD, "Try to uninstall RD printer");
RemotePrinter::uninstallPrinter();
RemotePrinter::uninstallPrinter(appNameValue);
WcaLog(LOGMSG_STANDARD, "Uninstall RD printer done");
LExit:
if (pwzData) {
ReleaseStr(pwzData);
}
er = SUCCEEDED(hr) ? ERROR_SUCCESS : ERROR_INSTALL_FAILURE;
return WcaFinalize(er);
}

View File

@@ -18,12 +18,19 @@ namespace RemotePrinter
{
#define HRESULT_ERR_ELEMENT_NOT_FOUND 0x80070490
// The driver files and the driver name ship with the app under their stock names
// and stay fixed for every custom client. Only the printer and its port carry the
// app name, and that arrives at runtime so one dll serves every custom client.
LPCWCH RD_DRIVER_INF_PATH = L"drivers\\RustDeskPrinterDriver\\RustDeskPrinterDriver.inf";
LPCWCH RD_PRINTER_PORT = L"RustDesk Printer";
LPCWCH RD_PRINTER_NAME = L"RustDesk Printer";
LPCWCH RD_PRINTER_DRIVER_NAME = L"RustDesk v4 Printer Driver";
LPCWCH RD_DEFAULT_APP_NAME = L"RustDesk";
LPCWCH XCV_MONITOR_LOCAL_PORT = L",XcvMonitor Local Port";
static std::wstring printerNameOf(const std::wstring &appName)
{
return (appName.empty() ? std::wstring(RD_DEFAULT_APP_NAME) : appName) + L" Printer";
}
using FuncEnum = std::function<BOOL(DWORD level, LPBYTE pDriverInfo, DWORD cbBuf, LPDWORD pcbNeeded, LPDWORD pcReturned)>;
template <typename T, typename R>
using FuncOnData = std::function<std::shared_ptr<R>(const T &)>;
@@ -458,8 +465,12 @@ namespace RemotePrinter
// We should not check the driver version because the driver is deployed with the application.
// It's better to uninstall the existing driver and install the driver from the application.
// 3. Add the printer.
VOID installUpdatePrinter(const std::wstring &installFolder)
VOID installUpdatePrinter(const std::wstring &installFolder, const std::wstring &appName)
{
const std::wstring printerName = printerNameOf(appName);
const LPCWCH RD_PRINTER_NAME = printerName.c_str();
const LPCWCH RD_PRINTER_PORT = printerName.c_str();
const std::wstring infFile = installFolder + L"\\" + RemotePrinter::RD_DRIVER_INF_PATH;
if (!FileExists(infFile))
{
@@ -505,13 +516,15 @@ namespace RemotePrinter
}
}
VOID uninstallPrinter()
VOID uninstallPrinter(const std::wstring &appName)
{
deletePrinter(RD_PRINTER_NAME);
const std::wstring printerName = printerNameOf(appName);
deletePrinter(printerName.c_str());
WcaLog(LOGMSG_STANDARD, "Deleted the printer\n");
uninstallDriver(RD_PRINTER_DRIVER_NAME);
WcaLog(LOGMSG_STANDARD, "Uninstalled the printer driver\n");
checkDeleteLocalPort(RD_PRINTER_PORT);
checkDeleteLocalPort(printerName.c_str());
WcaLog(LOGMSG_STANDARD, "Deleted the local port\n");
}
}

View File

@@ -30,7 +30,14 @@
<CustomAction Id="SetPropertyServiceStop.SetParam.PropertyName" Return="check" Property="PropertyName" Value="STOP_SERVICE" />
<CustomAction Id="TryDeleteStartupShortcut.SetParam" Return="check" Property="ShortcutName" Value="$(var.Product) Tray" />
<CustomAction Id="RemoveAmyuniIdd.SetParam" Return="check" Property="RemoveAmyuniIdd" Value="[INSTALLFOLDER_INNER]" />
<CustomAction Id="InstallPrinter.SetParam" Return="check" Property="InstallPrinter" Value="[INSTALLFOLDER_INNER]" />
<!-- The app name comes first and is separated by '|', which cannot occur in a
Windows path nor in a validated app name. wcautil's own delimiter is a
literal wide char 128 that a Formatted value cannot carry, and [~] is
MSI's NUL escape rather than that delimiter, so the action parses this
itself. Passing the name keeps the dll free of it, so one build serves
every custom client. -->
<CustomAction Id="InstallPrinter.SetParam" Return="check" Property="InstallPrinter" Value="[ProductName]|[INSTALLFOLDER_INNER]" />
<CustomAction Id="UninstallPrinter.SetParam" Return="check" Property="UninstallPrinter" Value="[ProductName]" />
<InstallExecuteSequence>
<Custom Action="SetPropertyIsServiceRunning" After="InstallInitialize" Condition="Installed" />
@@ -86,6 +93,7 @@
<Custom Action="RemoveFirewallRules.SetParam" Before="RemoveFirewallRules"/>
<Custom Action="UninstallPrinter" Before="RemoveRuntimeGeneratedFiles" Condition="VersionNT &gt;= 603" />
<Custom Action="UninstallPrinter.SetParam" Before="UninstallPrinter" Condition="VersionNT &gt;= 603" />
<Custom Action="TerminateProcesses" Before="RemoveRuntimeGeneratedFiles"/>
<Custom Action="TerminateProcesses.SetParam" Before="TerminateProcesses"/>

View File

@@ -13,6 +13,12 @@
<PropertyRef Id="AddRemovePropertiesFile" />
<Media Id="1" Cabinet="cab1.cab" EmbedCab="yes" CompressionLevel="high" />
<!--$Media2Start$-->
<!-- preprocess.py in template mode adds a second cabinet here, holding only
the files that differ per customer, so a custom client can be produced by
rebuilding that small cabinet instead of the whole package. The shipped
msi is built without template mode and keeps a single cabinet. -->
<!--$Media2End$-->
<Icon Id="AppIcon" SourceFile="Resources\icon.ico" />
<CustomAction Id="BlockSelfInstalledApp" Error="!(loc.AnotherAppDialogDescription)" />

View File

@@ -10,7 +10,6 @@ import subprocess
import re
import platform
from pathlib import Path
from itertools import chain
import shutil
from xml.sax.saxutils import quoteattr
@@ -67,6 +66,14 @@ def make_parser():
parser.add_argument(
"-c", "--custom", action="store_true", help="Is custom client", default=False
)
parser.add_argument(
"--template",
action="store_true",
default=False,
help="Build a template to be patched per customer rather than a finished "
"package: puts the files a custom client replaces in their own cabinet, so "
"rebranding rebuilds a few hundred KB instead of the whole payload.",
)
parser.add_argument(
"--conn-type",
type=str,
@@ -92,6 +99,43 @@ def make_parser():
return parser
# Files a custom client replaces. Kept in their own cabinet by --template so that
# rebranding rebuilds a few hundred KB instead of recompressing the whole payload.
# The app executable is handled separately: it has its own component in RustDesk.wxs.
#
# A template has to ship a placeholder for each of these so there is a File row to
# patch, but the branding assets are optional for a customer and a stock build has
# none of them at all. So each optional one installs only when its property is set,
# which the patcher does for the files a customer actually supplied. Otherwise a
# customer without a logo would install the placeholder, where today they get no
# logo at all -- the client treats a missing asset as "no logo".
PER_CUSTOMER_DISK_ID = 2
PER_CUSTOMER_FILES = {
# relative path -> property gating installation, or None if always installed
"custom.txt": None,
"data/flutter_assets/assets/icon.ico": "CC_HAS_ICON_ICO",
"data/flutter_assets/assets/icon.png": "CC_HAS_ICON_PNG",
"data/flutter_assets/assets/logo.png": "CC_HAS_LOGO",
"data/flutter_assets/assets/logo_light.png": "CC_HAS_LOGO_LIGHT",
"data/flutter_assets/assets/logo_dark.png": "CC_HAS_LOGO_DARK",
}
def normalize_relative(relative_path):
path = relative_path.replace("\\", "/")
while path.startswith("./"):
path = path[2:]
return path.lower()
def is_per_customer(relative_path):
return normalize_relative(relative_path) in PER_CUSTOMER_FILES
def per_customer_condition(relative_path):
return PER_CUSTOMER_FILES.get(normalize_relative(relative_path))
def read_lines_and_start_index(file_path, tag_start, tag_end):
with open(file_path, "r", encoding="utf-8") as f:
lines = f.readlines()
@@ -112,7 +156,7 @@ def read_lines_and_start_index(file_path, tag_start, tag_end):
return lines, index_start
def insert_components_between_tags(lines, index_start, app_name, dist_dir):
def insert_components_between_tags(lines, index_start, app_name, dist_dir, template=False):
indent = g_indent_unit * 3
path = Path(dist_dir)
idx = 1
@@ -126,12 +170,23 @@ def insert_components_between_tags(lines, index_start, app_name, dist_dir):
if subdir != ".":
dir_attr = f'Subdirectory="{subdir}"'
relative = file_path.relative_to(path).as_posix()
disk_attr = ""
condition_attr = ""
if template and is_per_customer(relative):
disk_attr = f' DiskId="{PER_CUSTOMER_DISK_ID}"'
# Branding assets are optional, and the template only carries a
# placeholder, so install one only when the customer supplied it.
condition = per_customer_condition(relative)
if condition:
condition_attr = f' Condition="{condition} = 1"'
# Don't generate Component Id and File Id like 'Component_{idx}' and 'File_{idx}'
# because it will cause error
# "Error WIX0130 The primary key 'xxxx' is duplicated in table 'Directory'"
to_insert_lines = f"""
{indent}<Component Guid="{uuid.uuid4()}" {dir_attr}>
{indent}{g_indent_unit}<File Source="{file_path.as_posix()}" KeyPath="yes" Checksum="yes" />
{indent}<Component Guid="{uuid.uuid4()}" {dir_attr}{condition_attr}>
{indent}{g_indent_unit}<File Source="{file_path.as_posix()}" KeyPath="yes" Checksum="yes"{disk_attr} />
{indent}</Component>
"""
lines.insert(index_start + 1, to_insert_lines[1:])
@@ -140,17 +195,52 @@ def insert_components_between_tags(lines, index_start, app_name, dist_dir):
return True
def gen_auto_component(app_name, dist_dir):
def gen_auto_component(app_name, dist_dir, template=False):
return gen_content_between_tags(
"Package/Components/RustDesk.wxs",
"<!--$AutoComonentStart$-->",
"<!--$AutoComponentEnd$-->",
lambda lines, index_start: insert_components_between_tags(
lines, index_start, app_name, dist_dir
lines, index_start, app_name, dist_dir, template
),
)
def gen_media2():
"""Second cabinet holding only what a custom client replaces."""
def func(lines, index_start):
indent = g_indent_unit * 2
lines.insert(
index_start + 1,
f'{indent}<Media Id="{PER_CUSTOMER_DISK_ID}" Cabinet="cab2.cab"'
' EmbedCab="yes" CompressionLevel="high" />\n',
)
return lines
return gen_content_between_tags(
"Package/Package.wxs", "<!--$Media2Start$-->", "<!--$Media2End$-->", func
)
def put_app_exe_on_media2():
"""The app executable has its own component, so it is moved by name."""
target = Path(sys.argv[0]).parent.joinpath("Package/Components/RustDesk.wxs")
with open(target, "r", encoding="utf-8") as f:
content = f.read()
old = '<File Id="App.exe" Name="$(var.Product).exe" KeyPath="yes" Checksum="yes">'
new = (
'<File Id="App.exe" Name="$(var.Product).exe" KeyPath="yes" Checksum="yes"'
f' DiskId="{PER_CUSTOMER_DISK_ID}">'
)
if content.count(old) != 1:
print(f"Error: expected exactly one App.exe File element, found {content.count(old)}")
return False
with open(target, "w", encoding="utf-8") as f:
f.write(content.replace(old, new))
return True
def gen_pre_vars(args, dist_dir):
def func(lines, index_start):
upgrade_code = uuid.uuid5(uuid.NAMESPACE_OID, app_name + ".exe")
@@ -190,18 +280,6 @@ def replace_app_name_in_langs(app_name):
with open(file_path, "w", encoding="utf-8") as f:
f.writelines(lines)
def replace_app_name_in_custom_actions(app_name):
custion_actions_dir = Path(sys.argv[0]).parent.joinpath("CustomActions")
for file_path in chain(custion_actions_dir.glob("*.cpp"), custion_actions_dir.glob("*.h")):
with open(file_path, "r", encoding="utf-8") as f:
lines = f.readlines()
for i, line in enumerate(lines):
line = re.sub(r"\bRustDesk\b", app_name, line)
line = line.replace(f"{app_name} v4 Printer Driver", "RustDesk v4 Printer Driver")
lines[i] = line
with open(file_path, "w", encoding="utf-8") as f:
f.writelines(lines)
def gen_upgrade_info():
def func(lines, index_start):
indent = g_indent_unit * 3
@@ -478,11 +556,16 @@ if __name__ == "__main__":
if not gen_conn_type(args):
sys.exit(-1)
if not gen_auto_component(app_name, dist_dir):
if args.template:
if not gen_media2():
sys.exit(-1)
if not put_app_exe_on_media2():
sys.exit(-1)
if not gen_auto_component(app_name, dist_dir, args.template):
sys.exit(-1)
if not gen_custom_dialog_bitmaps():
sys.exit(-1)
replace_app_name_in_langs(args.app_name)
replace_app_name_in_custom_actions(args.app_name)

View File

@@ -87,7 +87,7 @@ if(VCPKG_HOST_IS_WINDOWS)
vcpkg_acquire_msys(MSYS_ROOT PACKAGES automake1.16)
set(SHELL "${MSYS_ROOT}/usr/bin/bash.exe")
vcpkg_add_to_path("${MSYS_ROOT}/usr/share/automake-1.16")
string(APPEND OPTIONS " --pkg-config=${CURRENT_HOST_INSTALLED_DIR}/tools/pkgconf/pkgconf${VCPKG_HOST_EXECUTABLE_SUFFIX}")
string(APPEND OPTIONS " --pkg-config=${CURRENT_HOST_INSTALLED_DIR}/tools/pkgconf/pkgconf${VCPKG_HOST_EXECUTABLE_SUFFIX} ")
else()
find_program(SHELL bash)
endif()

File diff suppressed because it is too large Load Diff

View File

@@ -185,14 +185,6 @@ impl<T: InvokeUiSession> Remote<T> {
.unwrap()
.set_connected();
let is_secured = peer.is_secured();
// Only WebRTC needs refining: its label names the transport that won the race,
// not the family ICE ended up nominating, and it is the one path where the two
// can disagree with the address the rendezvous observed.
let stream_type = if peer.webrtc_remote_ipv6().await.unwrap_or(false) {
"WebRTC/IPv6"
} else {
stream_type
};
self.handler
.set_connection_type(is_secured, direct, stream_type); // flutter -> connection_ready
if !is_secured
@@ -204,11 +196,6 @@ impl<T: InvokeUiSession> Remote<T> {
tokio::time::sleep(KCP_CLOSE_REASON_FLUSH_DELAY).await;
}
self.handle_disconnected(round);
// Close the WebRTC pc on this decline path too (no-op for TCP/WS); otherwise its
// pc lingers in the global session cache until ICE decays on its own. The pc
// and its teardown live on hbb_common's WebRTC I/O runtime, so this session
// runtime's death on return affects neither.
peer.close_webrtc();
return;
}
self.handler.update_direct(Some(direct));
@@ -355,14 +342,6 @@ impl<T: InvokeUiSession> Remote<T> {
}
}
log::debug!("Exit io_loop of id={}", self.handler.get_id());
// Close the WebRTC peer connection (if this session used it) so its pc is not left
// lingering in the global session cache after the session ends; dropping `peer`
// alone does not release it. No-op for TCP/WebSocket transports. The pc, its
// sockets and pump tasks, and this close all live on hbb_common's WebRTC I/O
// runtime — nothing may run them on this session runtime, which is dropped the
// moment io_loop returns and would kill the teardown (or, if awaited under a
// timeout, cancel it after `close()` latches `is_closed`, stranding the pc).
peer.close_webrtc();
// Stop client audio server.
if let Some(s) = self.stop_voice_call_sender.take() {
s.send(()).ok();

View File

@@ -1,7 +1,7 @@
use std::{
collections::HashMap,
future::Future,
net::SocketAddr,
net::{SocketAddr, ToSocketAddrs},
sync::{Arc, Mutex, RwLock},
task::Poll,
};
@@ -1153,13 +1153,6 @@ pub fn is_public(url: &str) -> bool {
host == "rustdesk.com" || host.ends_with(".rustdesk.com")
}
pub fn get_tcp_punch_enabled() -> bool {
config::option2bool(
keys::OPTION_ENABLE_TCP_PUNCH,
&get_local_option(keys::OPTION_ENABLE_TCP_PUNCH),
)
}
pub fn get_udp_punch_enabled() -> bool {
config::option2bool(
keys::OPTION_ENABLE_UDP_PUNCH,
@@ -1174,19 +1167,9 @@ pub fn get_ipv6_punch_enabled() -> bool {
)
}
pub fn get_webrtc_enabled() -> bool {
config::option2bool(
keys::OPTION_ENABLE_WEBRTC,
&get_local_option(keys::OPTION_ENABLE_WEBRTC),
)
}
pub fn get_local_option(key: &str) -> String {
let v = LocalConfig::get_option(key);
if key == keys::OPTION_ENABLE_UDP_PUNCH
|| key == keys::OPTION_ENABLE_IPV6_PUNCH
|| key == keys::OPTION_ENABLE_WEBRTC
{
if key == keys::OPTION_ENABLE_UDP_PUNCH || key == keys::OPTION_ENABLE_IPV6_PUNCH {
if v.is_empty() {
if !is_public(&Config::get_rendezvous_server()) {
return "N".to_owned();
@@ -2143,21 +2126,11 @@ pub fn get_rs_pk(str_base64: &str) -> Option<sign::PublicKey> {
}
pub fn decode_id_pk(signed: &[u8], key: &sign::PublicKey) -> ResultType<(String, [u8; 32])> {
let (id, pk, _) = decode_id_pk_dtls(signed, key)?;
Ok((id, pk))
}
/// Like [`decode_id_pk`] but also returns the signed DTLS certificate fingerprint (empty string
/// for non-WebRTC peers), used to bind a WebRTC DTLS channel to the verified peer identity.
pub fn decode_id_pk_dtls(
signed: &[u8],
key: &sign::PublicKey,
) -> ResultType<(String, [u8; 32], String)> {
let res = IdPk::parse_from_bytes(
&sign::verify(signed, key).map_err(|_| anyhow!("Signature mismatch"))?,
)?;
if let Some(pk) = get_pk(&res.pk) {
Ok((res.id, pk, res.dtls_fingerprint))
Ok((res.id, pk))
} else {
bail!("Wrong their public length");
}
@@ -2459,26 +2432,16 @@ pub fn is_udp_disabled() -> bool {
Config::get_option(keys::OPTION_DISABLE_UDP) == "Y"
}
/// Run KCP with its congestion window (nc=0) instead of the turbo profile it has always shipped.
///
/// Opt-in: which profile wins depends on why packets are lost — nc=1 deepens real congestion,
/// while nc=0 reads random loss as congestion and its RTO backoff drops cwnd to 1. Undecidable
/// without a shaped link, so keep what users run today.
#[inline]
pub fn get_kcp_cc_enabled() -> bool {
let k = keys::OPTION_ALLOW_KCP_CC;
config::option2bool(k, &Config::get_option(k))
}
// this crate https://github.com/yoshd/stun-client supports nat type
async fn stun_ipv6_test(stun_server: String) -> ResultType<(SocketAddr, String)> {
async fn stun_ipv6_test(stun_server: &str) -> ResultType<(SocketAddr, String)> {
use std::net::ToSocketAddrs;
use stunclient::StunClient;
let local_addr = SocketAddr::from(([0u16; 8], 0)); // [::]:0
let socket = UdpSocket::bind(&local_addr).await?;
// Resolve via tokio so DNS never blocks the async runtime worker.
let Some(stun_addr) = tokio::net::lookup_host(&stun_server)
.await?
.find(|x| x.is_ipv6())
let Some(stun_addr) = stun_server
.to_socket_addrs()?
.filter(|x| x.is_ipv6())
.next()
else {
bail!(
"Failed to resolve STUN ipv6 server address: {}",
@@ -2488,36 +2451,81 @@ async fn stun_ipv6_test(stun_server: String) -> ResultType<(SocketAddr, String)>
let client = StunClient::new(stun_addr);
let addr = client.query_external_address_async(&socket).await?;
Ok(if addr.ip().is_ipv6() {
(addr, stun_server)
(addr, stun_server.to_owned())
} else {
bail!("STUN server returned non-IPv6 address: {}", addr)
})
}
async fn stun_ipv4_test(stun_server: &str) -> ResultType<(SocketAddr, String)> {
use std::net::ToSocketAddrs;
use stunclient::StunClient;
let local_addr = SocketAddr::from(([0u8; 4], 0));
let socket = UdpSocket::bind(&local_addr).await?;
let Some(stun_addr) = stun_server
.to_socket_addrs()?
.filter(|x| x.is_ipv4())
.next()
else {
bail!(
"Failed to resolve STUN ipv4 server address: {}",
stun_server
);
};
let client = StunClient::new(stun_addr);
let addr = client.query_external_address_async(&socket).await?;
Ok(if addr.ip().is_ipv4() {
(addr, stun_server.to_owned())
} else {
bail!("STUN server returned non-IPv6 address: {}", addr)
})
}
static STUNS_V4: [&str; 3] = [
"stun.l.google.com:19302",
"stun.cloudflare.com:3478",
"stun.nextcloud.com:3478",
];
static STUNS_V6: [&str; 3] = [
"stun.l.google.com:19302",
"stun.cloudflare.com:3478",
"stun.nextcloud.com:3478",
];
pub async fn test_nat_ipv4() -> ResultType<(SocketAddr, String)> {
use hbb_common::futures::future::{select_ok, FutureExt};
let tests = STUNS_V4
.iter()
.map(|&stun| stun_ipv4_test(stun).boxed())
.collect::<Vec<_>>();
match select_ok(tests).await {
Ok(res) => {
return Ok(res.0);
}
Err(e) => {
bail!(
"Failed to get public IPv4 address via public STUN servers: {}",
e
);
}
};
}
async fn test_bind_ipv6() -> ResultType<SocketAddr> {
use hbb_common::futures::future::FutureExt;
let local_addr = SocketAddr::from(([0u16; 8], 0)); // [::]:0
let socket = UdpSocket::bind(local_addr).await?;
// Nothing is sent - `connect` only makes the kernel pick a route and a source address - so any
// resolvable target answers equally and the whole cost is DNS. Race the lookups rather than
// walk them: this is awaited inline on the connection path, not every STUN host publishes a
// AAAA, and one resolver that hangs must not decide whether this host has v6.
let lookups = hbb_common::webrtc::WebRTCStream::default_stun_servers()
.into_iter()
.map(|stun| {
(async move {
let addr = tokio::net::lookup_host(&stun)
.await?
.find(|x| x.is_ipv6())
.ok_or_else(|| {
anyhow!("Failed to resolve STUN ipv6 server address: {}", stun)
})?;
Ok::<SocketAddr, hbb_common::anyhow::Error>(addr)
})
.boxed()
})
.collect::<Vec<_>>();
let (addr, _) = hbb_common::futures::future::select_ok(lookups).await?;
let addr = STUNS_V6[0]
.to_socket_addrs()?
.filter(|x| x.is_ipv6())
.next()
.ok_or_else(|| {
anyhow!(
"Failed to resolve STUN ipv6 server address: {}",
STUNS_V6[0]
)
})?;
socket.connect(addr).await?;
Ok(socket.local_addr()?)
}
@@ -2584,9 +2592,9 @@ pub async fn test_ipv6() -> Option<tokio::task::JoinHandle<()>> {
Some(tokio::spawn(async {
use hbb_common::futures::future::{select_ok, FutureExt};
let tests = hbb_common::webrtc::WebRTCStream::default_stun_servers()
.into_iter()
.map(|stun| stun_ipv6_test(stun).boxed())
let tests = STUNS_V6
.iter()
.map(|&stun| stun_ipv6_test(stun).boxed())
.collect::<Vec<_>>();
match select_ok(tests).await {
@@ -2607,114 +2615,51 @@ pub async fn test_ipv6() -> Option<tokio::task::JoinHandle<()>> {
}))
}
// A punch packet carries a magic and a transaction id so a reply can be *proven* to answer this
// probe. The punch it replaces sent a zero-length datagram and called the hole open on whatever
// arrived next - which the rendezvous NAT test's own leftover replies satisfied instantly, so the
// retry loop below never actually ran and its success meant nothing.
const PUNCH_PROBE: [u8; 4] = *b"RDP?";
const PUNCH_ACK: [u8; 4] = *b"RDP!";
const PUNCH_PACKET_LEN: usize = 12;
fn punch_packet(tag: &[u8; 4], tid: u64) -> [u8; PUNCH_PACKET_LEN] {
let mut packet = [0u8; PUNCH_PACKET_LEN];
packet[..4].copy_from_slice(tag);
packet[4..].copy_from_slice(&tid.to_le_bytes());
packet
}
fn punch_tid(packet: &[u8], tag: &[u8; 4]) -> Option<u64> {
if packet.len() != PUNCH_PACKET_LEN || packet[..4] != tag[..] {
return None;
}
packet[4..].try_into().ok().map(u64::from_le_bytes)
}
/// Punch until one of our own probes is acknowledged. Both ends run this identically - each
/// probes, each answers the other's probes - and each returns only once a reply carrying its own
/// transaction id comes back, the one thing that proves the pair carries traffic both ways.
///
/// Returning is therefore a fact rather than a guess, which is what lets the caller stop instead
/// of handing a dead socket to a transport whose only way to discover the truth is to time out.
///
/// A datagram that is neither probe nor acknowledgement is returned rather than dropped: it means
/// the peer finished first and is already speaking KCP, whose SYN is never retransmitted.
///
/// Only the connector stops on its own acknowledgement, because only it has something to send
/// next. An acknowledgement proves our probe came back, not that the peer's probe was answered -
/// and after this returns nothing answers probes any more, since KCP's io loop drops anything
/// shorter than its header. A listener that stopped here would go mute while a peer whose own
/// probe or answer was lost - the normal state of a hole that is still opening - kept probing an
/// endpoint that works, until it timed out. So the listener stops on the peer's first real packet.
pub async fn punch_udp(
socket: Arc<UdpSocket>,
listen: bool,
) -> ResultType<Option<bytes::BytesMut>> {
let tid = ((hbb_common::time_based_rand() as u64) << 32) | hbb_common::time_based_rand() as u64;
let probe = punch_packet(&PUNCH_PROBE, tid);
let mut data = [0u8; 1500];
// `connect` does not flush the receive queue, so the NAT test's extra replies are still in it.
while socket.try_recv(&mut data).is_ok() {}
let mut retry_interval = Duration::from_millis(20);
const MAX_INTERVAL: Duration = Duration::from_millis(200);
// Both ends start within one rendezvous round trip of each other and the acknowledgement is
// one peer round trip, so a pair that has not answered in this long is not going to. The old
// 20s came from having no way to tell "not yet" from "never".
const MAX_TIME: Duration = Duration::from_secs(3);
let mut probes_sent = 0u32;
let mut probes_seen = 0u32;
let mut acked = false;
let mut recv_errors = 0u32;
socket.send(&probe).await.ok();
probes_sent += 1;
const MAX_TIME: Duration = Duration::from_secs(20);
let mut packets_sent = 0;
socket.send(&[]).await.ok();
packets_sent += 1;
let mut last_send_time = Instant::now();
let tm = Instant::now();
let mut data = [0u8; 1500];
loop {
tokio::select! {
_ = hbb_common::sleep(retry_interval.as_secs_f32()) => {
if tm.elapsed() > MAX_TIME {
bail!("UDP punch is timed out, {probes_sent} probes sent, {probes_seen} probes received, acked: {acked}, {recv_errors} recv errors absorbed");
bail!("UDP punch is timed out, stop sending packets after {:?} packets", packets_sent);
}
if last_send_time.elapsed() >= retry_interval {
socket.send(&probe).await.ok();
probes_sent += 1;
retry_interval = std::cmp::min(retry_interval.mul_f64(1.5), MAX_INTERVAL);
let elapsed = last_send_time.elapsed();
if elapsed >= retry_interval {
socket.send(&[]).await.ok();
packets_sent += 1;
// Exponentially increase interval to reduce network pressure
retry_interval = std::cmp::min(
Duration::from_millis((retry_interval.as_millis() as f64 * 1.5) as u64),
MAX_INTERVAL
);
last_send_time = Instant::now();
}
}
res = socket.recv(&mut data) => match res {
Err(e) => {
// ICMP unreachable from the peer's NAT is expected while the hole forms and
// surfaces here as ConnectionReset/Refused; treat it as loss, MAX_TIME bounds
// the attempt. Log only the first - this retries every 10ms.
recv_errors += 1;
if recv_errors == 1 {
log::debug!("UDP punch recv error (treated as loss): {e}");
}
hbb_common::sleep(0.01).await;
}
Err(e) => bail!("UDP punch failed, {packets_sent} packets sent: {e}"),
Ok(n) => {
let ack = punch_tid(&data[..n], &PUNCH_ACK);
if ack == Some(tid) {
if !listen {
log::debug!(
"UDP punch confirmed in {:?}, {probes_sent} probes sent, {probes_seen} received",
tm.elapsed()
);
return Ok(None);
// log::debug!("UDP punch succeeded after sending {} packets after {:?}", packets_sent, tm.elapsed());
if listen {
if n == 0 {
continue;
}
acked = true;
} else if let Some(peer_tid) = punch_tid(&data[..n], &PUNCH_PROBE) {
probes_seen += 1;
socket.send(&punch_packet(&PUNCH_ACK, peer_tid)).await.ok();
} else if ack.is_none() && n > 0 {
log::debug!(
"UDP punch confirmed by {n} bytes of peer data in {:?}, {probes_sent} probes sent",
tm.elapsed()
);
return Ok(Some(bytes::BytesMut::from(&data[..n])));
}
return Ok(None);
}
}
}

View File

@@ -24,6 +24,7 @@ use std::os::windows::io::AsRawHandle;
use std::{
fs,
path::{Path, PathBuf},
sync::{Mutex, OnceLock},
};
#[cfg(windows)]
use windows::Win32::{Foundation::HANDLE, System::Pipes::GetNamedPipeClientProcessId};
@@ -519,17 +520,66 @@ pub(crate) fn ensure_peer_executable_matches_current_by_fd(
#[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
const UNAUTHORIZED_IPC_LOG_INTERVAL: std::time::Duration = std::time::Duration::from_secs(5);
#[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
#[derive(Default)]
struct UnauthorizedIpcLogThrottle {
last_log_at: Option<std::time::Instant>,
suppressed: u64,
}
#[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
impl UnauthorizedIpcLogThrottle {
#[inline]
fn on_reject(&mut self, now: std::time::Instant) -> Option<u64> {
if let Some(last) = self.last_log_at {
if now.saturating_duration_since(last) < UNAUTHORIZED_IPC_LOG_INTERVAL {
self.suppressed += 1;
return None;
}
}
self.last_log_at = Some(now);
Some(std::mem::take(&mut self.suppressed))
}
}
#[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
#[inline]
fn throttled_unauthorized_ipc_log(
throttle_cell: &OnceLock<Mutex<UnauthorizedIpcLogThrottle>>,
emit: impl FnOnce(u64),
) {
let throttle = throttle_cell.get_or_init(|| Mutex::new(UnauthorizedIpcLogThrottle::default()));
let should_log = match throttle.lock() {
Ok(mut throttle) => throttle.on_reject(std::time::Instant::now()),
Err(_) => Some(0),
};
if let Some(suppressed) = should_log {
emit(suppressed);
}
}
#[cfg(any(target_os = "linux", target_os = "macos"))]
#[inline]
fn log_rejected_service_connection(postfix: &str, peer_uid: Option<u32>, active_uid: Option<u32>) {
hbb_common::throttled_log!(
UNAUTHORIZED_IPC_LOG_INTERVAL,
warn,
"Rejected unauthorized connection on protected service-scoped IPC channel: postfix={}, peer_uid={:?}, active_uid={:?}",
postfix,
peer_uid,
active_uid
);
static LOG_THROTTLE: OnceLock<Mutex<UnauthorizedIpcLogThrottle>> = OnceLock::new();
throttled_unauthorized_ipc_log(&LOG_THROTTLE, |suppressed| {
if suppressed > 0 {
log::warn!(
"Rejected unauthorized connection on protected service-scoped IPC channel: postfix={}, peer_uid={:?}, active_uid={:?} (suppressed {} similar events)",
postfix,
peer_uid,
active_uid,
suppressed
);
} else {
log::warn!(
"Rejected unauthorized connection on protected service-scoped IPC channel: postfix={}, peer_uid={:?}, active_uid={:?}",
postfix,
peer_uid,
active_uid
);
}
});
}
#[cfg(target_os = "linux")]
@@ -539,14 +589,25 @@ pub(crate) fn log_rejected_uinput_connection(
peer_uid: Option<u32>,
active_uid: Option<u32>,
) {
hbb_common::throttled_log!(
UNAUTHORIZED_IPC_LOG_INTERVAL,
warn,
"Rejected unauthorized connection on uinput ipc channel: postfix={}, peer_uid={:?}, active_uid={:?}",
postfix,
peer_uid,
active_uid
);
static LOG_THROTTLE: OnceLock<Mutex<UnauthorizedIpcLogThrottle>> = OnceLock::new();
throttled_unauthorized_ipc_log(&LOG_THROTTLE, |suppressed| {
if suppressed > 0 {
log::warn!(
"Rejected unauthorized connection on uinput ipc channel: postfix={}, peer_uid={:?}, active_uid={:?} (suppressed {} similar events)",
postfix,
peer_uid,
active_uid,
suppressed
);
} else {
log::warn!(
"Rejected unauthorized connection on uinput ipc channel: postfix={}, peer_uid={:?}, active_uid={:?}",
postfix,
peer_uid,
active_uid
);
}
});
}
#[cfg(windows)]
@@ -559,17 +620,31 @@ pub(crate) fn log_rejected_windows_ipc_connection(
peer_is_system: Option<bool>,
peer_is_elevated: Option<bool>,
) {
hbb_common::throttled_log!(
UNAUTHORIZED_IPC_LOG_INTERVAL,
warn,
"Rejected unauthorized connection on ipc channel: postfix={}, peer_pid={:?}, peer_session_id={:?}, expected_session_id={:?}, peer_is_system={:?}, peer_is_elevated={:?}",
postfix,
peer_pid,
peer_session_id,
expected_session_id,
peer_is_system,
peer_is_elevated
);
static LOG_THROTTLE: OnceLock<Mutex<UnauthorizedIpcLogThrottle>> = OnceLock::new();
throttled_unauthorized_ipc_log(&LOG_THROTTLE, |suppressed| {
if suppressed > 0 {
log::warn!(
"Rejected unauthorized connection on ipc channel: postfix={}, peer_pid={:?}, peer_session_id={:?}, expected_session_id={:?}, peer_is_system={:?}, peer_is_elevated={:?} (suppressed {} similar events)",
postfix,
peer_pid,
peer_session_id,
expected_session_id,
peer_is_system,
peer_is_elevated,
suppressed
);
} else {
log::warn!(
"Rejected unauthorized connection on ipc channel: postfix={}, peer_pid={:?}, peer_session_id={:?}, expected_session_id={:?}, peer_is_system={:?}, peer_is_elevated={:?}",
postfix,
peer_pid,
peer_session_id,
expected_session_id,
peer_is_system,
peer_is_elevated
);
}
});
}
#[cfg(any(target_os = "linux", target_os = "macos"))]

View File

@@ -19,28 +19,7 @@ pub struct KcpStream {
stop_sender: Option<oneshot::Sender<()>>,
}
const KCP_IO_ERR_LOG_INTERVAL: std::time::Duration = std::time::Duration::from_secs(5);
static KCP_SEND_ERR_LOG: hbb_common::log_throttle::LogThrottle =
hbb_common::log_throttle::LogThrottle::new(KCP_IO_ERR_LOG_INTERVAL);
static KCP_RECV_ERR_LOG: hbb_common::log_throttle::LogThrottle =
hbb_common::log_throttle::LogThrottle::new(KCP_IO_ERR_LOG_INTERVAL);
impl KcpStream {
// Opt in to KCP's built-in congestion window (nc=0) instead of the pure turbo profile
// (nc=1) that has always shipped; see `get_kcp_cc_enabled` for why this is not the default.
// Sender-side only, so no wire negotiation is needed and either peer may run either profile.
// Requires kcp-sys from the `rustdesk-patches` branch, which wires the config factory into
// connection setup (on older revs the factory was stored but never consulted).
fn apply_kcp_config(endpoint: &mut KcpEndpoint) {
if crate::get_kcp_cc_enabled() {
endpoint.set_kcp_config_factory(Box::new(|conv| {
let mut config = kcp_sys::ffi_safe::KcpConfig::new_turbo(conv);
config.nc = Some(0);
config
}));
}
}
fn create_framed(stream: stream::KcpStream, local_addr: Option<SocketAddr>) -> Stream {
Stream::Tcp(FramedStream(
tokio_util::codec::Framed::new(DynTcpStream(Box::new(stream)), BytesCodec::new()),
@@ -56,7 +35,6 @@ impl KcpStream {
init_packet: Option<BytesMut>,
) -> ResultType<(Self, Stream)> {
let mut endpoint = KcpEndpoint::new();
Self::apply_kcp_config(&mut endpoint);
endpoint.run().await;
let (input, output) = (
@@ -92,7 +70,6 @@ impl KcpStream {
timeout: std::time::Duration,
) -> ResultType<(Self, Stream)> {
let mut endpoint = KcpEndpoint::new();
Self::apply_kcp_config(&mut endpoint);
endpoint.run().await;
let (input, output) = (
@@ -127,10 +104,6 @@ impl KcpStream {
let udp = udp_socket.clone();
tokio::spawn(async move {
let mut buf = vec![0; 1500];
// Socket errors are ICMP unreachable on a connected UDP socket — advisory, and
// routine while a hole forms — so treat them as loss and let KCP's pong timeout reap
// a link that is really dead. One throttle PER DIRECTION: the error is reported once
// and cleared, so send-ok/recv-err alternates and a shared counter never fires.
loop {
tokio::select! {
_ = &mut stop_receiver => {
@@ -139,10 +112,8 @@ impl KcpStream {
}
Some(data) = output.recv() => {
if let Err(e) = udp.send(&data.inner()).await {
if let Some(n) = KCP_SEND_ERR_LOG.due() {
log::debug!("KCP send error x{n} (treated as loss), last: {e}");
}
tokio::time::sleep(std::time::Duration::from_millis(10)).await;
log::debug!("KCP send error: {:?}", e);
break;
}
}
result = udp.recv_from(&mut buf) => {
@@ -156,10 +127,8 @@ impl KcpStream {
.await.ok();
}
Err(e) => {
if let Some(n) = KCP_RECV_ERR_LOG.due() {
log::debug!("KCP recv error x{n} (treated as loss), last: {e}");
}
tokio::time::sleep(std::time::Duration::from_millis(10)).await;
log::debug!("KCP recv_from error: {:?}", e);
break;
}
}
}
@@ -180,124 +149,3 @@ impl Drop for KcpStream {
}
}
}
#[cfg(test)]
mod tests {
use super::*;
use std::time::Duration;
async fn connected_pair() -> (Arc<UdpSocket>, Arc<UdpSocket>) {
let a = UdpSocket::bind("127.0.0.1:0").await.unwrap();
let b = UdpSocket::bind("127.0.0.1:0").await.unwrap();
a.connect(b.local_addr().unwrap()).await.unwrap();
b.connect(a.local_addr().unwrap()).await.unwrap();
(Arc::new(a), Arc::new(b))
}
async fn establish() -> ((KcpStream, Stream), (KcpStream, Stream)) {
let (a, b) = connected_pair().await;
let (accept_res, connect_res) = tokio::join!(
KcpStream::accept(b, Duration::from_secs(5), None),
KcpStream::connect(a, Duration::from_secs(5))
);
(
connect_res.expect("connect over loopback"),
accept_res.expect("accept over loopback"),
)
}
// The full client path over real loopback sockets: handshake through the kcp_io
// pumps, framed data both ways, then a graceful close. The endpoint guard stays
// alive across the stream drop so the FIN can go out, and the peer's framed
// stream must end (BrokenPipe from the kcp reader) instead of hanging.
#[tokio::test]
async fn test_kcp_stream_loopback_roundtrip_and_close() {
let ((_guard_a, mut stream_a), (_guard_b, mut stream_b)) = establish().await;
stream_a
.send_bytes(Bytes::from_static(b"ping"))
.await
.unwrap();
let got = stream_b.next_timeout(5000).await.unwrap().unwrap();
assert_eq!(&got[..], b"ping");
stream_b
.send_bytes(Bytes::from_static(b"pong"))
.await
.unwrap();
let got = stream_a.next_timeout(5000).await.unwrap().unwrap();
assert_eq!(&got[..], b"pong");
drop(stream_a);
match stream_b.next_timeout(10_000).await {
None | Some(Err(_)) => {}
Some(Ok(data)) => panic!("unexpected data after close: {:?}", data),
}
}
// A writer that queues many frames and closes immediately must not cost the
// reader any of them: every frame arrives intact, in order, before end-of-stream.
// This is the client-side pin for the kcp-sys close-tail-drain semantics, through
// the real BytesCodec framing rustdesk sessions use.
#[tokio::test]
async fn test_kcp_stream_close_delivers_all_frames() {
let ((_guard_a, mut tx), (_guard_b, mut rx)) = establish().await;
const N: usize = 50;
let payload = vec![7u8; 32 * 1024];
for _ in 0..N {
tx.send_bytes(Bytes::from(payload.clone())).await.unwrap();
}
drop(tx);
let mut got = 0usize;
loop {
match rx.next_timeout(10_000).await {
Some(Ok(data)) => {
assert_eq!(data.len(), payload.len(), "frame boundary broken");
assert!(data.iter().all(|&b| b == 7), "frame content corrupted");
got += 1;
}
// BrokenPipe (kcp reader end) or timeout-None both end the stream.
None | Some(Err(_)) => break,
}
}
assert_eq!(got, N, "graceful close lost frames");
}
// Socket errors on the connected UDP socket (ICMP unreachable after the peer
// vanishes) are advisory: the io loop must treat them as loss - keep accepting
// writes, keep running - rather than tearing the session down. Whether the OS
// actually surfaces ECONNREFUSED here is platform-dependent; either way the
// session must stay alive for this window.
#[tokio::test]
async fn test_kcp_io_treats_socket_errors_as_loss() {
let ((_guard_a, mut stream_a), (guard_b, stream_b)) = establish().await;
// Kill the peer entirely: endpoint stops, socket closes.
drop(stream_b);
drop(guard_b);
tokio::time::sleep(Duration::from_millis(50)).await;
for _ in 0..10 {
stream_a
.send_bytes(Bytes::from_static(b"into the void"))
.await
.expect("socket errors must be treated as loss, not stream failure");
tokio::time::sleep(Duration::from_millis(20)).await;
}
}
// The connect deadline must hold when nothing answers: no hang, prompt error.
#[tokio::test]
async fn test_kcp_connect_timeout_without_peer() {
let (a, _b) = connected_pair().await;
let start = tokio::time::Instant::now();
let res = KcpStream::connect(a, Duration::from_millis(600)).await;
assert!(res.is_err(), "connect must fail with no peer endpoint");
assert!(
start.elapsed() < Duration::from_secs(5),
"connect did not honor its deadline"
);
}
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "لقطة الشاشة للشاشات المدمجة غير مدعومة"),
("screenshot-action-tip", "إجراء لقطة الشاشة"),
("Save as", "حفظ باسم"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "تصدير"),
("Export Logs", "تصدير السجلات"),
("Import Folder", "استيراد مجلد"),
("Copy to clipboard", "نسخ إلى الحافظة"),
("Enable remote printer", "تمكين الطابعة عن بُعد"),
("Downloading {}", "جارٍ تنزيل {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "قفل اللوحة"),
("Sync clipboard between sessions", "مزامنة الحافظة بين الجلسات"),
("sync-clipboard-between-sessions-tip", "النص أو الصور المنسوخة في جلسة بعيدة واحدة تُرسَل أيضًا إلى حافظة جلساتك المتصلة الأخرى."),
("Enable WebRTC P2P connection", "تمكين اتصال نظير إلى نظير عبر WebRTC"),
("Enable TCP hole punching", "تمكين تقنية حفر الثغرات عبر TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "تفعيل"),
("Reuse one connection for port forwarding", "إعادة استخدام اتصال واحد لإعادة توجيه المنافذ"),
("port-forward-mux-tip", "تمرير جميع اتصالات إعادة توجيه المنافذ عبر اتصال واحد بالجهاز الآخر، بدلاً من الاتصال وتسجيل الدخول من جديد لكل اتصال."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Аб’яднанне здымкаў экранаў з некалькіх дысплэяў у дадзены момант не падтрымліваецца. Пераключыцеся на адзін з дысплэяў і паўтарыце дзеянне."),
("screenshot-action-tip", "Выберыце, што рабіць з атрыманым здымкам экрана."),
("Save as", "Захаваць у файл"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Экспартаваць"),
("Export Logs", "Экспартаваць журналы"),
("Import Folder", "Імпартаваць папку"),
("Copy to clipboard", "Скапіяваць у буфер абмену"),
("Enable remote printer", "Выкарыстоўваць аддалены прынтар"),
("Downloading {}", "Ідзе спампоўванне {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Заблакіраваць палатно"),
("Sync clipboard between sessions", "Сінхранізаваць буфер абмену паміж сеансамі"),
("sync-clipboard-between-sessions-tip", "Тэкст або відарысы, скапіяваныя ў адным аддаленым сеансе, таксама адпраўляюцца ў буфер абмену іншых вашых падключаных сеансаў."),
("Enable WebRTC P2P connection", "Выкарыстоўваць падключэнне WebRTC P2P"),
("Enable TCP hole punching", "Выкарыстоўваць TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Уключыць"),
("Reuse one connection for port forwarding", "Выкарыстоўваць адно злучэнне для перанакіравання партоў"),
("port-forward-mux-tip", "Перадаваць усе злучэнні аднаго перанакіравання партоў праз адно злучэнне з аддаленай прыладай замест паўторнага падлучэння і ўваходу для кожнага з іх."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Обединяването на снимки от няколко екрана в момента не се поддържа. Моля, превключете към един екран и опитайте отново."),
("screenshot-action-tip", "Моля, изберете как да продължите със снимката на екрана."),
("Save as", "Запазване като"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Изнасяне"),
("Export Logs", "Изнасяне на дневниците"),
("Import Folder", "Внасяне на папка"),
("Copy to clipboard", "Копиране в клипборда"),
("Enable remote printer", "Позволяване на отдалечен принтер"),
("Downloading {}", "Изтегляне на {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Заключване на платното"),
("Sync clipboard between sessions", "Синхронизиране на клипборда между сесиите"),
("sync-clipboard-between-sessions-tip", "Текст или изображения, копирани в една отдалечена сесия, се изпращат и към клипборда на другите ви свързани сесии."),
("Enable WebRTC P2P connection", "Позволяване на WebRTC P2P връзка"),
("Enable TCP hole punching", "Позволяване на TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Активирай"),
("Reuse one connection for port forwarding", "Използване на една връзка за пренасочване на портове"),
("port-forward-mux-tip", "Всички връзки на едно пренасочване на портове минават през една връзка към отсрещния компютър, вместо да се свързвате и влизате отново за всяка от тях."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Actualment no és possible combinar captures de pantalla de diverses pantalles. Canvieu a una sola pantalla i torneu a provar."),
("screenshot-action-tip", "Seleccioneu com voleu continuar amb la captura de pantalla."),
("Save as", "Anomena i desa"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exporta"),
("Export Logs", "Exporta els registres"),
("Import Folder", "Importa una carpeta"),
("Copy to clipboard", "Copia al porta-retalls"),
("Enable remote printer", "Habilita l'impressora remota"),
("Downloading {}", "Descarregant {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Bloca el llenç"),
("Sync clipboard between sessions", "Sincronitza el porta-retalls entre sessions"),
("sync-clipboard-between-sessions-tip", "El text o les imatges copiats en una sessió remota també s'envien al porta-retalls de les altres sessions connectades."),
("Enable WebRTC P2P connection", "Habilita la connexió WebRTC P2P"),
("Enable TCP hole punching", "Activa la perforació TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Habilita"),
("Reuse one connection for port forwarding", "Reutilitza una connexió per a la redirecció de ports"),
("port-forward-mux-tip", "Fa passar totes les connexions d'una redirecció de ports per una única connexió amb l'altre equip, en lloc de connectar i iniciar la sessió de nou per a cadascuna."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "当前不支持多个屏幕的合并截屏,请切换到单个屏幕重试。"),
("screenshot-action-tip", "请选择如何继续截屏。"),
("Save as", "另存为"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "导出"),
("Export Logs", "导出日志"),
("Import Folder", "导入文件夹"),
("Copy to clipboard", "复制到剪贴板"),
("Enable remote printer", "启用远程打印机"),
("Downloading {}", "正在下载 {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "锁定画布"),
("Sync clipboard between sessions", "在会话间同步剪贴板"),
("sync-clipboard-between-sessions-tip", "在一个远程会话中复制的文本或图片也会发送到其他已连接会话的剪贴板。"),
("Enable WebRTC P2P connection", "启用 WebRTC P2P 连接"),
("Enable TCP hole punching", "启用 TCP 打洞"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", "允许终端应用复制到剪贴板"),
("Enable", "启用"),
("Reuse one connection for port forwarding", "端口转发复用同一条连接"),
("port-forward-mux-tip", "同一条端口转发规则上的所有连接共用一条到对方的连接,而不是每条连接都重新连接并登录一次。"),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Sloučení snímků obrazovky z více displejů aktuálně není podporováno. Přepněte na jeden displej a zkuste to znovu."),
("screenshot-action-tip", "Vyberte, jak pokračovat se snímkem obrazovky."),
("Save as", "Uložit jako"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportovat"),
("Export Logs", "Exportovat protokoly"),
("Import Folder", "Importovat složku"),
("Copy to clipboard", "Kopírovat do schránky"),
("Enable remote printer", "Povolit vzdálenou tiskárnu"),
("Downloading {}", "Stahuje se {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Zamknout zobrazení"),
("Sync clipboard between sessions", "Synchronizovat schránku mezi relacemi"),
("sync-clipboard-between-sessions-tip", "Text nebo obrázky zkopírované v jedné vzdálené relaci se odešlou i do schránky ostatních připojených relací."),
("Enable WebRTC P2P connection", "Povolit připojení WebRTC P2P"),
("Enable TCP hole punching", "Povolit TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Povolit"),
("Reuse one connection for port forwarding", "Znovu použít jedno připojení pro přesměrování portů"),
("port-forward-mux-tip", "Vede všechna připojení jednoho přesměrování portů přes jediné připojení k protějšku místo opakovaného připojování a přihlašování pro každé z nich."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Sammenfletning af skærmbilleder fra flere skærme understøttes ikke i øjeblikket. Skift venligst til en enkelt skærm og prøv igen."),
("screenshot-action-tip", "Vælg venligst, hvordan du vil fortsætte med skærmbilledet."),
("Save as", "Gem som"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Eksportér"),
("Export Logs", "Eksportér logfiler"),
("Import Folder", "Importér mappe"),
("Copy to clipboard", "Kopiér til udklipsholder"),
("Enable remote printer", "Aktivér fjernprinter"),
("Downloading {}", "Downloader {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Lås lærred"),
("Sync clipboard between sessions", "Synkroniser udklipsholder mellem sessioner"),
("sync-clipboard-between-sessions-tip", "Tekst eller billeder, der kopieres i én fjernsession, sendes også til udklipsholderen i dine andre forbundne sessioner."),
("Enable WebRTC P2P connection", "Aktivér WebRTC P2P-forbindelse"),
("Enable TCP hole punching", "Aktivér TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Aktivér"),
("Reuse one connection for port forwarding", "Genbrug én forbindelse til portvideresendelse"),
("port-forward-mux-tip", "Fører alle forbindelser i en portvideresendelse gennem én enkelt forbindelse til modparten i stedet for at forbinde og logge ind igen for hver enkelt."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Das Zusammenführen von Screenshots von mehreren Bildschirmen wird derzeit nicht unterstützt. Bitte wechseln Sie zu einem einzelnen Bildschirm und versuchen Sie es erneut."),
("screenshot-action-tip", "Bitte wählen Sie aus, wie Sie mit dem Screenshot fortfahren möchten."),
("Save as", "Speichern unter"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportieren"),
("Export Logs", "Protokolle exportieren"),
("Import Folder", "Ordner importieren"),
("Copy to clipboard", "In Zwischenablage kopieren"),
("Enable remote printer", "Entfernten Drucker aktivieren"),
("Downloading {}", "{} herunterladen"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Sichtfeld sperren"),
("Sync clipboard between sessions", "Zwischenablage zwischen Sitzungen synchronisieren"),
("sync-clipboard-between-sessions-tip", "In einer Remote-Sitzung kopierter Text oder kopierte Bilder werden auch an die Zwischenablage Ihrer anderen verbundenen Sitzungen gesendet."),
("Enable WebRTC P2P connection", "WebRTC-P2P-Verbindung aktivieren"),
("Enable TCP hole punching", "TCP-Hole-Punching aktivieren"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Aktivieren"),
("Reuse one connection for port forwarding", "Eine Verbindung für die Portweiterleitung wiederverwenden"),
("port-forward-mux-tip", "Alle Verbindungen einer Portweiterleitung über eine einzige Verbindung zur Gegenstelle führen, statt sich für jede einzelne neu zu verbinden und anzumelden."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Η συγχώνευση στιγμιότυπων οθόνης από πολλές οθόνες δεν υποστηρίζεται προς το παρόν. Αλλάξτε σε μία μόνο οθόνη και δοκιμάστε ξανά."),
("screenshot-action-tip", "Επιλέξτε πώς θα συνεχίσετε με το στιγμιότυπο οθόνης."),
("Save as", "Αποθήκευση ως"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Εξαγωγή"),
("Export Logs", "Εξαγωγή αρχείων καταγραφής"),
("Import Folder", "Εισαγωγή φακέλου"),
("Copy to clipboard", "Αντιγραφή στο πρόχειρο"),
("Enable remote printer", "Ενεργοποίηση απομακρυσμένου εκτυπωτή"),
("Downloading {}", "Γίνεται Λήψη {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Κλείδωμα καμβά"),
("Sync clipboard between sessions", "Συγχρονισμός προχείρου μεταξύ συνεδριών"),
("sync-clipboard-between-sessions-tip", "Κείμενο ή εικόνες που αντιγράφονται σε μία απομακρυσμένη συνεδρία αποστέλλονται και στο πρόχειρο των άλλων συνδεδεμένων συνεδριών σας."),
("Enable WebRTC P2P connection", "Ενεργοποίηση σύνδεσης WebRTC P2P"),
("Enable TCP hole punching", "Ενεργοποίηση διάτρησης οπών TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Ενεργοποίηση"),
("Reuse one connection for port forwarding", "Επαναχρησιμοποίηση μίας σύνδεσης για την προώθηση θυρών"),
("port-forward-mux-tip", "Όλες οι συνδέσεις μιας προώθησης θυρών περνούν από μία μόνο σύνδεση προς τον απομακρυσμένο υπολογιστή, αντί να πραγματοποιείται νέα σύνδεση και ταυτοποίηση για κάθε μία."),
].iter().cloned().collect();
}

View File

@@ -276,5 +276,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("whitelist_cidr_tip", "CIDR notation is supported, e.g. 192.168.1.0/24"),
("Your ip is blocked by the peer", "Your IP is blocked by the peer"),
("sync-clipboard-between-sessions-tip", "Text or images copied in one remote session are also sent to the clipboard of your other connected sessions."),
("terminal-clipboard-write-tip", "An app in the terminal wants to copy text to this device's clipboard. If granted, this permission applies to terminal apps in all connections until you turn it off in Settings. Manual copy and paste are unaffected."),
("port-forward-mux-tip", "Carry every connection of a port-forward mapping over a single connection to the peer, instead of connecting and logging in again for each one."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Kunfandi ekrankopiojn de pluraj ekranoj aktuale ne estas subtenata. Bonvolu ŝanĝi al unu ekrano kaj reprovi."),
("screenshot-action-tip", "Bonvolu elekti kiel daŭrigi kun la ekrankopio."),
("Save as", "Konservi kiel"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Eksporti"),
("Export Logs", "Eksporti protokolojn"),
("Import Folder", "Importi dosierujon"),
("Copy to clipboard", "Kopii al la poŝo"),
("Enable remote printer", "Ebligi foran presilon"),
("Downloading {}", "Elŝutas {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Ŝlosi kanvason"),
("Sync clipboard between sessions", "Sinkronigi poŝon inter seancoj"),
("sync-clipboard-between-sessions-tip", "Teksto aŭ bildoj kopiitaj en unu fora seanco ankaŭ sendiĝas al la poŝo de viaj aliaj konektitaj seancoj."),
("Enable WebRTC P2P connection", "Ebligi WebRTC P2P-konekton"),
("Enable TCP hole punching", "Ebligi TCP-trapikadon"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Ebligi"),
("Reuse one connection for port forwarding", "Reuzi unu konekton por pordo-plusendado"),
("port-forward-mux-tip", "Ĉiuj konektoj de unu pordo-plusendado iras tra unu sola konekto al la alia komputilo, anstataŭ konekti kaj ensaluti denove por ĉiu el ili."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "La fusión de capturas de pantalla de múltiples monitores no está soportada. Por favor, cambie a un monitor e inténtelo de nuevo."),
("screenshot-action-tip", "Por favor, seleccione cómo continuar con la captura de pantalla."),
("Save as", "Guardar como"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportar"),
("Export Logs", "Exportar registros"),
("Import Folder", "Importar carpeta"),
("Copy to clipboard", "Copiar al portapapeles"),
("Enable remote printer", "Habilitar impresora remota"),
("Downloading {}", "Descargando {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Bloquear lienzo"),
("Sync clipboard between sessions", "Sincronizar portapapeles entre sesiones"),
("sync-clipboard-between-sessions-tip", "El texto o las imágenes copiados en una sesión remota también se envían al portapapeles de tus otras sesiones conectadas."),
("Enable WebRTC P2P connection", "Habilitar conexión WebRTC P2P"),
("Enable TCP hole punching", "Habilitar perforación de agujero TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Habilitar"),
("Reuse one connection for port forwarding", "Reutilizar una conexión para la redirección de puertos"),
("port-forward-mux-tip", "Llevar todas las conexiones de una redirección de puertos por una única conexión con el otro equipo, en lugar de conectar e iniciar sesión de nuevo para cada una."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Mitme kuva kuvatõmmiste ühendamine pole praegu toetatud. Palun lülitu ühele kuvale ja proovi uuesti."),
("screenshot-action-tip", "Palun vali, kuidas kuvatõmmisega jätkata."),
("Save as", "Salvesta kui"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Ekspordi"),
("Export Logs", "Ekspordi logid"),
("Import Folder", "Impordi kaust"),
("Copy to clipboard", "Kopeeri lõikelauale"),
("Enable remote printer", "Luba kaugprinter"),
("Downloading {}", "Allalaadimine: {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Lukusta lõuend"),
("Sync clipboard between sessions", "Sünkrooni lõikelaud seansside vahel"),
("sync-clipboard-between-sessions-tip", "Ühes kaugseansis kopeeritud tekst või pildid saadetakse ka teiste ühendatud seansside lõikelauale."),
("Enable WebRTC P2P connection", "Luba WebRTC P2P-ühendus"),
("Enable TCP hole punching", "Luba TCP-augustamine"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Luba"),
("Reuse one connection for port forwarding", "Kasuta pordi suunamiseks üht ühendust"),
("port-forward-mux-tip", "Juhib ühe pordisuunamise kõik ühendused ühe teise arvutiga loodud ühenduse kaudu, selle asemel et iga ühenduse jaoks uuesti ühenduda ja sisse logida."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Pantaila anitzen pantaila-argazkiak bateratzea ez da onartzen une honetan. Aldatu pantaila bakarrera eta saiatu berriro."),
("screenshot-action-tip", "Hautatu pantaila-argazkiarekin nola jarraitu."),
("Save as", "Gorde honela"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Esportatu"),
("Export Logs", "Esportatu erregistroak"),
("Import Folder", "Inportatu karpeta"),
("Copy to clipboard", "Kopiatu arbelera"),
("Enable remote printer", "Gaitu urruneko inprimagailua"),
("Downloading {}", "{} deskargatzen"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Blokeatu oihala"),
("Sync clipboard between sessions", "Sinkronizatu arbela saioen artean"),
("sync-clipboard-between-sessions-tip", "Urruneko saio batean kopiatutako testua edo irudiak konektatutako beste saioen arbelera ere bidaltzen dira."),
("Enable WebRTC P2P connection", "Gaitu WebRTC P2P konexioa"),
("Enable TCP hole punching", "Gaitu TCP zulo-egitea"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Gaitu"),
("Reuse one connection for port forwarding", "Berrerabili konexio bakarra portuen birbideratzerako"),
("port-forward-mux-tip", "Portu-birbideratze baten konexio guztiak beste ordenagailurako konexio bakar batetik eramaten ditu, bakoitzerako berriro konektatu eta saioa hasi beharrean."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "ادغام تصاویر از نمایشگرهای متعدد در حال حاضر پشتیبانی نمی شود. لطفاً به یک صفحه نمایش واحد تغییر دهید و دوباره امتحان کنید."),
("screenshot-action-tip", "لطفاً نحوه ادامه با تصویر را انتخاب کنید."),
("Save as", "ذخیره به عنوان"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "خروجی گرفتن"),
("Export Logs", "خروجی گرفتن از گزارش‌ها"),
("Import Folder", "درون‌ریزی پوشه"),
("Copy to clipboard", "در کلیپ بورد کپی کنید"),
("Enable remote printer", "چاپگر از راه دور را فعال کنید"),
("Downloading {}", "بارگیری {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "قفل کردن صفحه"),
("Sync clipboard between sessions", "همگام‌سازی کلیپ‌بورد بین نشست‌ها"),
("sync-clipboard-between-sessions-tip", "متن یا تصاویری که در یک نشست راه دور کپی می‌شوند به کلیپ‌بورد سایر نشست‌های متصل شما نیز ارسال می‌شوند."),
("Enable WebRTC P2P connection", "فعال‌سازی اتصال همتا‌به‌همتای WebRTC"),
("Enable TCP hole punching", "فعال‌سازی تکنیک TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "فعال‌سازی"),
("Reuse one connection for port forwarding", "استفاده مجدد از یک اتصال برای هدایت پورت"),
("port-forward-mux-tip", "همه اتصال‌های یک هدایت پورت از یک اتصال واحد به دستگاه مقابل عبور می‌کنند، به‌جای اتصال و ورود دوباره برای هر کدام."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Yhdistetyn näytön kuvakaappaus ei ole tuettu"),
("screenshot-action-tip", "Valitse, mitä haluat tehdä kuvakaappaukselle"),
("Save as", "Tallenna nimellä"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Vie"),
("Export Logs", "Vie lokit"),
("Import Folder", "Tuo kansio"),
("Copy to clipboard", "Kopioi leikepöydälle"),
("Enable remote printer", "Ota etätulostin käyttöön"),
("Downloading {}", "Ladataan {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Lukitse näkymä"),
("Sync clipboard between sessions", "Synkronoi leikepöytä istuntojen välillä"),
("sync-clipboard-between-sessions-tip", "Yhdessä etäistunnossa kopioitu teksti tai kuvat lähetetään myös muiden yhdistettyjen istuntojen leikepöydälle."),
("Enable WebRTC P2P connection", "Ota WebRTC P2P yhteys käyttöön"),
("Enable TCP hole punching", "Ota käyttöön TCP hole punching tekniikka"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Ota käyttöön"),
("Reuse one connection for port forwarding", "Käytä yhtä yhteyttä portin edelleenohjaukseen"),
("port-forward-mux-tip", "Välittää kaikki yhden portin edelleenohjauksen yhteydet yhden vastapuoleen avatun yhteyden kautta sen sijaan, että jokaista varten muodostettaisiin yhteys ja kirjauduttaisiin uudelleen."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Actuellement, la prise de capture décran ne prend pas en charge les affichages multiples. Veuillez réessayer après avoir sélectionné un seul affichage."),
("screenshot-action-tip", "Veuillez choisir laction à effectuer avec la capture décran."),
("Save as", "Enregistrer sous"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exporter"),
("Export Logs", "Exporter les journaux"),
("Import Folder", "Importer un dossier"),
("Copy to clipboard", "Copier dans le presse-papier"),
("Enable remote printer", "Activer limpression à distance"),
("Downloading {}", "Téléchargement de {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Verrouiller la vue"),
("Sync clipboard between sessions", "Synchroniser le presse-papiers entre les sessions"),
("sync-clipboard-between-sessions-tip", "Le texte ou les images copiés dans une session distante sont également envoyés au presse-papiers de vos autres sessions connectées."),
("Enable WebRTC P2P connection", "Activer la connexion P2P WebRTC"),
("Enable TCP hole punching", "Activer le « hole punching » TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Activer"),
("Reuse one connection for port forwarding", "Réutiliser une seule connexion pour la redirection de ports"),
("port-forward-mux-tip", "Faire passer toutes les connexions d'une redirection de ports par une seule connexion vers le pair, au lieu de se connecter et de s'authentifier à nouveau pour chacune."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "რამდენიმე ეკრანის სურათის გაერთიანება ამჟამად მხარდაჭერილი არ არის. გადართეთ ერთ ეკრანზე და სცადეთ ხელახლა."),
("screenshot-action-tip", "აირჩიეთ, როგორ გავაგრძელოთ ეკრანის სურათთან მუშაობა."),
("Save as", "შენახვა როგორც"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "ექსპორტი"),
("Export Logs", "ჟურნალების ექსპორტი"),
("Import Folder", "საქაღალდის იმპორტი"),
("Copy to clipboard", "ბუფერში კოპირება"),
("Enable remote printer", "დისტანციური პრინტერის ჩართვა"),
("Downloading {}", "მიმდინარეობს {}-ის ჩამოტვირთვა"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "ტილოს დაბლოკვა"),
("Sync clipboard between sessions", "გაცვლის ბუფერის სინქრონიზაცია სესიებს შორის"),
("sync-clipboard-between-sessions-tip", "ერთ დაშორებულ სესიაში დაკოპირებული ტექსტი ან სურათები ასევე იგზავნება თქვენი სხვა დაკავშირებული სესიების გაცვლის ბუფერში."),
("Enable WebRTC P2P connection", "WebRTC P2P კავშირის ჩართვა"),
("Enable TCP hole punching", "TCP hole punching-ის ჩართვა"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "ჩართვა"),
("Reuse one connection for port forwarding", "პორტის გადამისამართებისთვის ერთი კავშირის ხელახლა გამოყენება"),
("port-forward-mux-tip", "ერთი პორტის გადამისამართების ყველა კავშირი გადის მეორე კომპიუტერთან დამყარებული ერთი კავშირით, ნაცვლად იმისა, რომ თითოეულისთვის თავიდან დაუკავშირდეს და შევიდეს სისტემაში."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "મર્જ કરેલ સ્ક્રીનશોટ સપોર્ટેડ નથી."),
("screenshot-action-tip", "સ્ક્રીનશોટ પછીની ક્રિયા"),
("Save as", "તરીકે સાચવો"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "એક્સપોર્ટ કરો"),
("Export Logs", "લોગ એક્સપોર્ટ કરો"),
("Import Folder", "ફોલ્ડર ઇમ્પોર્ટ કરો"),
("Copy to clipboard", "ક્લિપબોર્ડમાં કોપી કરો"),
("Enable remote printer", "રિમોટ પ્રિન્ટર સક્ષમ કરો"),
("Downloading {}", "{} ડાઉનલોડ થઈ રહ્યું છે"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "કેનવાસ લોક કરો"),
("Sync clipboard between sessions", "સત્રો વચ્ચે ક્લિપબોર્ડ સિંક કરો"),
("sync-clipboard-between-sessions-tip", "એક રિમોટ સત્રમાં કૉપિ કરેલ ટેક્સ્ટ કે છબીઓ તમારા અન્ય જોડાયેલા સત્રોના ક્લિપબોર્ડ પર પણ મોકલવામાં આવે છે."),
("Enable WebRTC P2P connection", "WebRTC P2P કનેક્શન સક્ષમ કરો"),
("Enable TCP hole punching", "TCP હોલ પંચિંગ સક્ષમ કરો"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "સક્ષમ કરો"),
("Reuse one connection for port forwarding", "પોર્ટ ફોરવર્ડિંગ માટે એક જ કનેક્શન ફરી વાપરો"),
("port-forward-mux-tip", "એક પોર્ટ ફોરવર્ડિંગનાં બધાં કનેક્શન સામેના કમ્પ્યુટર સાથેના એક જ કનેક્શન મારફતે જાય છે, દરેક માટે ફરીથી કનેક્ટ અને લોગિન કરવાને બદલે."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "צילום מסך משולב מכל המסכים אינו נתמך"),
("screenshot-action-tip", "בחר פעולה לאחר צילום המסך"),
("Save as", "שמור בשם"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "ייצוא"),
("Export Logs", "ייצוא יומנים"),
("Import Folder", "ייבוא תיקייה"),
("Copy to clipboard", "העתק ללוח"),
("Enable remote printer", "אפשר מדפסת מרוחקת"),
("Downloading {}", "מוריד את {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "נעל לוח ציור"),
("Sync clipboard between sessions", "סנכרן לוח בין סשנים"),
("sync-clipboard-between-sessions-tip", "טקסט או תמונות שהועתקו בסשן מרוחק אחד נשלחים גם ללוח של שאר הסשנים המחוברים שלך."),
("Enable WebRTC P2P connection", "אפשר חיבור WebRTC P2P"),
("Enable TCP hole punching", "אפשר TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "הפעל"),
("Reuse one connection for port forwarding", "שימוש חוזר בחיבור אחד להעברת פורטים"),
("port-forward-mux-tip", "כל החיבורים של העברת פורטים אחת עוברים דרך חיבור יחיד למחשב המרוחק, במקום ליצור חיבור חדש ולהיכנס מחדש עבור כל אחד מהם."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "मर्ज की गई स्क्रीन के स्क्रीनशॉट समर्थित नहीं हैं।"),
("screenshot-action-tip", "स्क्रीनशॉट लेने के बाद की कार्रवाई"),
("Save as", "इस रूप में सहेजें"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "एक्सपोर्ट करें"),
("Export Logs", "लॉग एक्सपोर्ट करें"),
("Import Folder", "फ़ोल्डर इंपोर्ट करें"),
("Copy to clipboard", "क्लिपबोर्ड पर कॉपी करें"),
("Enable remote printer", "रिमोट प्रिंटर सक्षम करें"),
("Downloading {}", "{} डाउनलोड हो रहा है"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "कैनवास लॉक करें"),
("Sync clipboard between sessions", "सत्रों के बीच क्लिपबोर्ड सिंक करें"),
("sync-clipboard-between-sessions-tip", "एक रिमोट सत्र में कॉपी किए गए टेक्स्ट या चित्र आपके अन्य जुड़े सत्रों के क्लिपबोर्ड पर भी भेजे जाते हैं।"),
("Enable WebRTC P2P connection", "WebRTC P2P कनेक्शन सक्षम करें"),
("Enable TCP hole punching", "TCP होल पंचिंग सक्षम करें"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "सक्षम करें"),
("Reuse one connection for port forwarding", "पोर्ट फ़ॉरवर्डिंग के लिए एक ही कनेक्शन दोबारा उपयोग करें"),
("port-forward-mux-tip", "एक पोर्ट फ़ॉरवर्डिंग के सभी कनेक्शन दूसरे कंप्यूटर से बने एक ही कनेक्शन से होकर जाते हैं, हर एक के लिए दोबारा कनेक्ट और लॉगिन करने के बजाय।"),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Spajanje snimaka zaslona s više zaslona trenutačno nije podržano. Prebacite se na jedan zaslon i pokušajte ponovno."),
("screenshot-action-tip", "Odaberite kako nastaviti sa snimkom zaslona."),
("Save as", "Spremi kao"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Izvoz"),
("Export Logs", "Izvoz zapisnika"),
("Import Folder", "Uvoz mape"),
("Copy to clipboard", "Kopiraj u međuspremnik"),
("Enable remote printer", "Omogući udaljeni pisač"),
("Downloading {}", "Preuzimanje {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Zaključaj pozadinu"),
("Sync clipboard between sessions", "Sinkroniziraj međuspremnik između sesija"),
("sync-clipboard-between-sessions-tip", "Tekst ili slike kopirani u jednoj udaljenoj sesiji šalju se i u međuspremnik vaših ostalih povezanih sesija."),
("Enable WebRTC P2P connection", "Omogući WebRTC P2P vezu"),
("Enable TCP hole punching", "Omogući TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Omogući"),
("Reuse one connection for port forwarding", "Ponovno koristi jednu vezu za prosljeđivanje portova"),
("port-forward-mux-tip", "Sve veze jednog prosljeđivanja portova idu kroz jednu vezu prema drugoj strani, umjesto ponovnog povezivanja i prijave za svaku od njih."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Egyesített képernyőről nem támogatott a képernyőkép készítése"),
("screenshot-action-tip", "Képernyőkép-művelet"),
("Save as", "Mentés másként"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportálás"),
("Export Logs", "Naplók exportálása"),
("Import Folder", "Mappa importálása"),
("Copy to clipboard", "Másolás a vágólapra"),
("Enable remote printer", "Távoli nyomtatók engedélyezése"),
("Downloading {}", "{} letöltése"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Nézet zárolása"),
("Sync clipboard between sessions", "Vágólap szinkronizálása a munkamenetek között"),
("sync-clipboard-between-sessions-tip", "Az egyik távoli munkamenetben másolt szöveg vagy kép a többi csatlakoztatott munkamenet vágólapjára is elküldésre kerül."),
("Enable WebRTC P2P connection", "WebRTC P2P kapcsolat engedélyezése"),
("Enable TCP hole punching", "TCP résszűrés engedélyezése"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Engedélyezés"),
("Reuse one connection for port forwarding", "Egyetlen kapcsolat újrafelhasználása a portátirányításhoz"),
("port-forward-mux-tip", "Egy portátirányítás összes kapcsolatát egyetlen, a másik géppel létesített kapcsolaton vezeti át, ahelyett hogy mindegyikhez újra csatlakozna és bejelentkezne."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Menggabungkan tangkapan layar dari beberapa tampilan saat ini tidak didukung. Silakan beralih ke satu tampilan dan coba lagi."),
("screenshot-action-tip", "Silakan pilih cara melanjutkan dengan tangkapan layar."),
("Save as", "Simpan sebagai"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Ekspor"),
("Export Logs", "Ekspor Log"),
("Import Folder", "Impor Folder"),
("Copy to clipboard", "Salin ke papan klip"),
("Enable remote printer", "Aktifkan printer jarak jauh"),
("Downloading {}", "Mendownload {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Kunci kanvas"),
("Sync clipboard between sessions", "Sinkronkan papan klip antar sesi"),
("sync-clipboard-between-sessions-tip", "Teks atau gambar yang disalin di satu sesi jarak jauh juga dikirim ke papan klip sesi terhubung Anda yang lain."),
("Enable WebRTC P2P connection", "Aktifkan koneksi P2P WebRTC"),
("Enable TCP hole punching", "Aktifkan TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Aktifkan"),
("Reuse one connection for port forwarding", "Gunakan ulang satu koneksi untuk penerusan port"),
("port-forward-mux-tip", "Menyalurkan semua koneksi dari satu penerusan port melalui satu koneksi ke perangkat lain, alih-alih menyambung dan masuk lagi untuk setiap koneksi."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "L'unione della cattura di schermate di più display non è attualmente supportata.\nPassa ad un singolo display e riprova."),
("screenshot-action-tip", "Seleziona come continuare con la schermata."),
("Save as", "Salva come"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Esporta"),
("Export Logs", "Esporta i log"),
("Import Folder", "Importa cartella"),
("Copy to clipboard", "Copia negli appunti"),
("Enable remote printer", "Abilita stampante remota"),
("Downloading {}", "Download {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Blocca tela"),
("Sync clipboard between sessions", "Sincronizza gli appunti tra le sessioni"),
("sync-clipboard-between-sessions-tip", "Il testo o le immagini copiati in una sessione remota vengono inviati anche agli appunti delle altre sessioni connesse."),
("Enable WebRTC P2P connection", "Abilita connessione P2P WebRTC"),
("Enable TCP hole punching", "Abilita hole punching TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Abilita"),
("Reuse one connection for port forwarding", "Riutilizza una sola connessione per l'inoltro delle porte"),
("port-forward-mux-tip", "Fa passare tutte le connessioni di un inoltro di porte su un'unica connessione verso il dispositivo remoto, invece di connettersi e autenticarsi di nuovo per ognuna."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "複数のディスプレイのスクリーンショットの結合は、現在非対応です。単一のディスプレイに切り替えてもう一度お試しください。"),
("screenshot-action-tip", "スクリーンショットを続行する方法を選択してください。"),
("Save as", "保存先"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "エクスポート"),
("Export Logs", "ログをエクスポート"),
("Import Folder", "フォルダをインポート"),
("Copy to clipboard", "クリップボードにコピー"),
("Enable remote printer", "リモートプリンターを有効化する"),
("Downloading {}", "{} をダウンロード中"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "キャンバスをロック"),
("Sync clipboard between sessions", "セッション間でクリップボードを同期"),
("sync-clipboard-between-sessions-tip", "1つのリモートセッションでコピーしたテキストや画像は、接続中の他のセッションのクリップボードにも送信されます。"),
("Enable WebRTC P2P connection", "WebRTC P2P 接続を有効化する"),
("Enable TCP hole punching", "TCP ホールパンチを有効化する"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "有効にする"),
("Reuse one connection for port forwarding", "ポート転送で 1 つの接続を再利用する"),
("port-forward-mux-tip", "1 つのポート転送のすべての接続を、相手への 1 本の接続にまとめます。接続ごとに接続とログインをやり直しません。"),
].iter().cloned().collect();
}

View File

@@ -378,7 +378,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Screen Share", "화면 공유"),
("ubuntu-21-04-required", "Wayland는 Ubuntu 21.04 이상 버전이 필요합니다."),
("wayland-requires-higher-linux-version", "Wayland는 상위 버전의 Linux 배포판이 필요합니다. X11 데스크탑을 사용하거나 OS를 변경하세요."),
("xdp-portal-unavailable", ""),
("xdp-portal-unavailable", "Wayland 화면 캡처에 실패했습니다. XDG Desktop Portal이 중단되었거나 사용할 수 없습니다. `systemctl --user restart xdg-desktop-portal` 명령으로 다시 시작해 보세요."),
("JumpLink", "점프 링크"),
("Please Select the screen to be shared(Operate on the peer side).", "공유할 화면을 선택하세요 (피어 측에서 작동)"),
("Show RustDesk", "RustDesk 표시"),
@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "현재 다중 디스플레이의 스크린샷 병합이 지원되지 않습니다. 단일 디스플레이로 전환한 후 다시 시도해 주세요."),
("screenshot-action-tip", "스크린샷을 계속 진행할 방법을 선택해 주세요."),
("Save as", "다른 이름으로 저장"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "내보내기"),
("Export Logs", "로그 내보내기"),
("Import Folder", "폴더 가져오기"),
("Copy to clipboard", "클립보드에 복사"),
("Enable remote printer", "원격 프린터 허용"),
("Downloading {}", "{} 다운로드 중"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "캔버스 잠금"),
("Sync clipboard between sessions", "세션 간 클립보드 동기화"),
("sync-clipboard-between-sessions-tip", "하나의 원격 세션에서 복사한 텍스트나 이미지는 연결된 다른 세션의 클립보드에도 전송됩니다."),
("Enable WebRTC P2P connection", "WebRTC P2P 연결 사용"),
("Enable TCP hole punching", "TCP 홀 펀칭 사용"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "활성화"),
("Reuse one connection for port forwarding", "포트 포워딩에 연결 하나를 재사용"),
("port-forward-mux-tip", "포트 포워딩 하나의 모든 연결을 상대방과의 단일 연결로 전달합니다. 연결마다 다시 접속하고 로그인하지 않습니다."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Бірнеше дисплейдің скриншоттарын біріктіруге қазір қолдау көрсетілмейді. Жеке дисплейге ауысып, қайталап көруді өтінеміз."),
("screenshot-action-tip", "Скриншотпен қалай жалғастыру керектігін таңдауды өтінеміз."),
("Save as", "Басқаша сақтау"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Экспорттау"),
("Export Logs", "Журналдарды экспорттау"),
("Import Folder", "Қалтаны импорттау"),
("Copy to clipboard", "Көшіру-тақтаға көшіру"),
("Enable remote printer", "Қашықтағы принтерді іске қосу"),
("Downloading {}", "{} жүктелуде"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Кенепті құлыптау"),
("Sync clipboard between sessions", "Сеанстар арасында көшіру-тақтасын синхрондау"),
("sync-clipboard-between-sessions-tip", "Бір қашықтағы сеанста көшірілген мәтін немесе суреттер басқа қосылған сеанстардың көшіру-тақтасына да жіберіледі."),
("Enable WebRTC P2P connection", "WebRTC P2P қосылымын іске қосу"),
("Enable TCP hole punching", "TCP hole punching'ті іске қосу"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Қосу"),
("Reuse one connection for port forwarding", "Порт бағыттау үшін бір қосылымды қайта пайдалану"),
("port-forward-mux-tip", "Бір порт бағыттаудың барлық қосылымдары әрқайсысы үшін қайта қосылып кірудің орнына қарсы құрылғымен орнатылған бір қосылым арқылы өтеді."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Kelių ekranų nuotraukų sujungimas šiuo metu nepalaikomas. Perjunkite į vieną ekraną ir bandykite dar kartą."),
("screenshot-action-tip", "Pasirinkite, ką daryti su ekrano nuotrauka."),
("Save as", "Įrašyti kaip"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Eksportuoti"),
("Export Logs", "Eksportuoti žurnalus"),
("Import Folder", "Importuoti aplanką"),
("Copy to clipboard", "Kopijuoti į iškarpinę"),
("Enable remote printer", "Įgalinti nuotolinį spausdintuvą"),
("Downloading {}", "Atsisiunčiama {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Užrakinti drobę"),
("Sync clipboard between sessions", "Sinchronizuoti iškarpinę tarp seansų"),
("sync-clipboard-between-sessions-tip", "Viename nuotoliniame seanse nukopijuotas tekstas ar vaizdai taip pat siunčiami į kitų prijungtų seansų iškarpinę."),
("Enable WebRTC P2P connection", "Įgalinti WebRTC P2P ryšį"),
("Enable TCP hole punching", "Įgalinti TCP gręžimą (hole punching)"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Įgalinti"),
("Reuse one connection for port forwarding", "Prievadų peradresavimui naudoti vieną ryšį"),
("port-forward-mux-tip", "Visi vieno prievadų peradresavimo ryšiai eina per vieną ryšį su kitu kompiuteriu, užuot kiekvienam iš jų jungiantis ir prisijungiant iš naujo."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Vairāku displeju ekrānuzņēmumu apvienošana pašlaik netiek atbalstīta. Lūdzu, pārslēdzieties uz vienu displeju un mēģiniet vēlreiz."),
("screenshot-action-tip", "Lūdzu, atlasiet, kā turpināt darbu ar ekrānuzņēmumu."),
("Save as", "Saglabāt kā"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Eksportēt"),
("Export Logs", "Eksportēt žurnālus"),
("Import Folder", "Importēt mapi"),
("Copy to clipboard", "Kopēt starpliktuvē"),
("Enable remote printer", "Iespējot attālo printeri"),
("Downloading {}", "Notiek {} lejupielāde"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Bloķēt audeklu"),
("Sync clipboard between sessions", "Sinhronizēt starpliktuvi starp sesijām"),
("sync-clipboard-between-sessions-tip", "Vienā attālajā sesijā nokopētais teksts vai attēli tiek nosūtīti arī uz pārējo pievienoto sesiju starpliktuvi."),
("Enable WebRTC P2P connection", "Iespējot WebRTC P2P savienojumu"),
("Enable TCP hole punching", "Iespējot TCP caurumu veidošanu"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Iespējot"),
("Reuse one connection for port forwarding", "Atkārtoti izmantot vienu savienojumu portu pārsūtīšanai"),
("port-forward-mux-tip", "Visi viena portu pārsūtījuma savienojumi tiek novadīti pa vienu savienojumu ar otru datoru, nevis katram no tiem izveidojot jaunu savienojumu un pieteikšanos."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "മെർജ് ചെയ്ത സ്ക്രീൻഷോട്ട് പിന്തുണയ്ക്കുന്നില്ല."),
("screenshot-action-tip", "സ്ക്രീൻഷോട്ടിന് ശേഷമുള്ള നടപടി"),
("Save as", "പേരിൽ സേവ് ചെയ്യുക"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "എക്‌സ്‌പോർട്ട് ചെയ്യുക"),
("Export Logs", "ലോഗുകൾ എക്‌സ്‌പോർട്ട് ചെയ്യുക"),
("Import Folder", "ഫോൾഡർ ഇംപോർട്ട് ചെയ്യുക"),
("Copy to clipboard", "ക്ലിപ്പ്ബോർഡിലേക്ക് കോപ്പി ചെയ്യുക"),
("Enable remote printer", "റിമോട്ട് പ്രിന്റർ അനുവദിക്കുക"),
("Downloading {}", "{} ഡൗൺലോഡ് ചെയ്യുന്നു"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "ക്യാൻവാസ് ലോക്ക് ചെയ്യുക"),
("Sync clipboard between sessions", "സെഷനുകൾക്കിടയിൽ ക്ലിപ്പ്ബോർഡ് സമന്വയിപ്പിക്കുക"),
("sync-clipboard-between-sessions-tip", "ഒരു റിമോട്ട് സെഷനിൽ പകർത്തിയ ടെക്സ്റ്റോ ചിത്രങ്ങളോ നിങ്ങളുടെ മറ്റ് കണക്റ്റുചെയ്ത സെഷനുകളുടെ ക്ലിപ്പ്ബോർഡിലേക്കും അയയ്ക്കപ്പെടും."),
("Enable WebRTC P2P connection", "WebRTC P2P കണക്ഷൻ അനുവദിക്കുക"),
("Enable TCP hole punching", "TCP ഹോൾ പഞ്ചിംഗ് അനുവദിക്കുക"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "അനുവദിക്കുക"),
("Reuse one connection for port forwarding", "പോർട്ട് ഫോർവേഡിംഗിന് ഒരേ കണക്ഷൻ വീണ്ടും ഉപയോഗിക്കുക"),
("port-forward-mux-tip", "ഒരു പോർട്ട് ഫോർവേഡിംഗിന്റെ എല്ലാ കണക്ഷനുകളും മറ്റേ കമ്പ്യൂട്ടറിലേക്കുള്ള ഒരൊറ്റ കണക്ഷനിലൂടെ കടന്നുപോകുന്നു, ഓരോന്നിനും വീണ്ടും കണക്റ്റ് ചെയ്ത് ലോഗിൻ ചെയ്യുന്നതിനു പകരം."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Sammenslåing av skjermbilder fra flere skjermer støttes for øyeblikket ikke. Bytt til én enkelt skjerm og prøv igjen."),
("screenshot-action-tip", "Velg hvordan du vil fortsette med skjermbildet."),
("Save as", "Lagre som"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Eksporter"),
("Export Logs", "Eksporter logger"),
("Import Folder", "Importer mappe"),
("Copy to clipboard", "Kopier til utklipstavlen"),
("Enable remote printer", "Aktiver fjernskriver"),
("Downloading {}", "Laster ned {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Lås lerret"),
("Sync clipboard between sessions", "Synkroniser utklippstavlen mellom økter"),
("sync-clipboard-between-sessions-tip", "Tekst eller bilder som kopieres i én ekstern økt, sendes også til utklippstavlen i de andre tilkoblede øktene dine."),
("Enable WebRTC P2P connection", "Aktiver WebRTC P2P-tilkobling"),
("Enable TCP hole punching", "Aktiver TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Aktiver"),
("Reuse one connection for port forwarding", "Gjenbruk én tilkobling for portvideresending"),
("port-forward-mux-tip", "Fører alle tilkoblinger i en portvideresending gjennom én enkelt tilkobling til motparten i stedet for å koble til og logge inn på nytt for hver enkelt."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Schermopnames van meerdere schermen samenvoegen wordt momenteel niet ondersteund. Schakel over naar een enkel scherm en herhaal de actie."),
("screenshot-action-tip", "Kies wat je met de gemaakte schermopname wilt doen."),
("Save as", "Opslaan als"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exporteren"),
("Export Logs", "Logboeken exporteren"),
("Import Folder", "Map importeren"),
("Copy to clipboard", "Kopiëren naar het klembord"),
("Enable remote printer", "Printer op afstand inschakelen"),
("Downloading {}", "Downloaden {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Canvas vergrendelen"),
("Sync clipboard between sessions", "Klembord synchroniseren tussen sessies"),
("sync-clipboard-between-sessions-tip", "Tekst of afbeeldingen die in één externe sessie worden gekopieerd, worden ook naar het klembord van uw andere verbonden sessies gestuurd."),
("Enable WebRTC P2P connection", "WebRTC P2P-verbinding inschakelen"),
("Enable TCP hole punching", "TCP-hole punching inschakelen"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Inschakelen"),
("Reuse one connection for port forwarding", "Eén verbinding hergebruiken voor poortdoorschakeling"),
("port-forward-mux-tip", "Alle verbindingen van een poortdoorschakeling via één enkele verbinding met de andere computer laten lopen, in plaats van voor elke verbinding opnieuw verbinding te maken en in te loggen."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Łączenie zrzutów ekranu z wielu wyświetlaczy nie jest obecnie obsługiwane. Przełącz się na pojedynczy wyświetlacz i spróbuj ponownie."),
("screenshot-action-tip", "Wybierz sposób kontynuacji zrzutu ekranu."),
("Save as", "Zapisz jako"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Eksportuj"),
("Export Logs", "Eksportuj dzienniki"),
("Import Folder", "Importuj folder"),
("Copy to clipboard", "Kopiuj do schowka"),
("Enable remote printer", "Włącz zdalne drukowanie"),
("Downloading {}", "Pobieranie {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Zablokuj ekran"),
("Sync clipboard between sessions", "Synchronizuj schowek między sesjami"),
("sync-clipboard-between-sessions-tip", "Tekst lub obrazy skopiowane w jednej sesji zdalnej są wysyłane także do schowka pozostałych połączonych sesji."),
("Enable WebRTC P2P connection", "Włącz połączenie P2P WebRTC"),
("Enable TCP hole punching", "Włącz tworzenie tunelu TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Włącz"),
("Reuse one connection for port forwarding", "Użyj ponownie jednego połączenia do przekierowania portów"),
("port-forward-mux-tip", "Przekazuj wszystkie połączenia jednego przekierowania portów przez jedno połączenie ze zdalnym komputerem, zamiast łączyć się i logować od nowa dla każdego z nich."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "A junção de capturas de ecrã de vários ecrãs não é atualmente suportada. Mude para um único ecrã e tente novamente."),
("screenshot-action-tip", "Selecione como pretende continuar com a captura de ecrã."),
("Save as", "Guardar como"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportar"),
("Export Logs", "Exportar Registos"),
("Import Folder", "Importar Pasta"),
("Copy to clipboard", "Copiar para a área de transferência"),
("Enable remote printer", "Ativar impressora remota"),
("Downloading {}", "A transferir {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Bloquear tela"),
("Sync clipboard between sessions", "Sincronizar área de transferência entre sessões"),
("sync-clipboard-between-sessions-tip", "O texto ou as imagens copiados numa sessão remota também são enviados para a área de transferência das suas outras sessões ligadas."),
("Enable WebRTC P2P connection", "Ativar ligação P2P por WebRTC"),
("Enable TCP hole punching", "Ativar TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Ativar"),
("Reuse one connection for port forwarding", "Reutilizar uma ligação para o reencaminhamento de portas"),
("port-forward-mux-tip", "Encaminhar todas as ligações de um reencaminhamento de portas por uma única ligação ao outro computador, em vez de ligar e iniciar sessão novamente para cada uma."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "A captura de tela de múltiplas telas não é suportada no momento. Por favor, alterne para uma única tela e tente novamente."),
("screenshot-action-tip", "Por favor, selecione como deseja continuar com a captura de tela."),
("Save as", "Salvar como"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportar"),
("Export Logs", "Exportar logs"),
("Import Folder", "Importar pasta"),
("Copy to clipboard", "Copiar para área de transferência"),
("Enable remote printer", "Habilitar impressora remota"),
("Downloading {}", "Baixando {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Bloquear tela"),
("Sync clipboard between sessions", "Sincronizar área de transferência entre sessões"),
("sync-clipboard-between-sessions-tip", "Texto ou imagens copiados em uma sessão remota também são enviados para a área de transferência das suas outras sessões conectadas."),
("Enable WebRTC P2P connection", "Habilitar conexão WebRTC P2P"),
("Enable TCP hole punching", "Habilitar TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Habilitar"),
("Reuse one connection for port forwarding", "Reutilizar uma conexão para encaminhamento de portas"),
("port-forward-mux-tip", "Levar todas as conexões de um encaminhamento de portas por uma única conexão com o outro computador, em vez de conectar e fazer login novamente para cada uma."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Captura de ecran a ecranului combinat nu este suportată în prezent."),
("screenshot-action-tip", "Selectează acțiunea pentru captura de ecran: salvează ca fișier sau copiază în clipboard."),
("Save as", "Salvează ca"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportă"),
("Export Logs", "Exportă jurnalele"),
("Import Folder", "Importă folder"),
("Copy to clipboard", "Copiază în clipboard"),
("Enable remote printer", "Activează imprimanta la distanță"),
("Downloading {}", "Se descarcă {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Blochează ecranul"),
("Sync clipboard between sessions", "Sincronizează clipboardul între sesiuni"),
("sync-clipboard-between-sessions-tip", "Textul sau imaginile copiate într-o sesiune la distanță sunt trimise și în clipboardul celorlalte sesiuni conectate."),
("Enable WebRTC P2P connection", "Activează conexiunea P2P prin WebRTC"),
("Enable TCP hole punching", "Activează traversarea TCP (hole punching)"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Activează"),
("Reuse one connection for port forwarding", "Reutilizează o singură conexiune pentru redirecționarea porturilor"),
("port-forward-mux-tip", "Trece toate conexiunile unei redirecționări de porturi printr-o singură conexiune către celălalt calculator, în loc să se conecteze și să se autentifice din nou pentru fiecare."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Объединение снимков экранов с нескольких дисплеев в настоящее время не поддерживается. Переключитесь на один дисплей и повторите действие."),
("screenshot-action-tip", "Выберите, что делать с полученным снимком экрана."),
("Save as", "Сохранить в файл"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Экспортировать"),
("Export Logs", "Экспортировать журналы"),
("Import Folder", "Импортировать папку"),
("Copy to clipboard", "Копировать в буфер обмена"),
("Enable remote printer", "Использовать удалённый принтер"),
("Downloading {}", "Скачивание"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Заблокировать холст"),
("Sync clipboard between sessions", "Синхронизировать буфер обмена между сеансами"),
("sync-clipboard-between-sessions-tip", "Текст или изображения, скопированные в одном удалённом сеансе, также отправляются в буфер обмена других подключённых сеансов."),
("Enable WebRTC P2P connection", "Использовать подключение WebRTC P2P"),
("Enable TCP hole punching", "Использовать TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Включить"),
("Reuse one connection for port forwarding", "Использовать одно подключение для перенаправления портов"),
("port-forward-mux-tip", "Передавать все соединения одного перенаправления портов через одно подключение к удалённому устройству вместо повторного подключения и входа для каждого из них."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "S'unione de sa catura de ischermadas de prus ischermos como no est suportada.\nCola a un'ischermu ebbia e torra a proare."),
("screenshot-action-tip", "Seletziona comente sighire cun s'ischermada."),
("Save as", "Sarva comente"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Esporta"),
("Export Logs", "Esporta is registros"),
("Import Folder", "Importa cartella"),
("Copy to clipboard", "Còpia in punta de billete"),
("Enable remote printer", "Abìlita imprentadora remota"),
("Downloading {}", "Iscarrighende {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Bloca sa tela"),
("Sync clipboard between sessions", "Sincroniza sa punta de billete intre is sessiones"),
("sync-clipboard-between-sessions-tip", "Su testu o is immàgines copiadas in una sessione remota sunt imbiadas fintzas a sa punta de billete de is àteras sessiones connètidas."),
("Enable WebRTC P2P connection", "Abìlita connessione P2P WebRTC"),
("Enable TCP hole punching", "Abìlita s'istampadura TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Abìlita"),
("Reuse one connection for port forwarding", "Torra a impreare una connessione pro s'imbiu de is portas"),
("port-forward-mux-tip", "Totu is connessiones de un'imbiu de portas passant in una connessione ebbia a s'àteru computadore, in logu de si connètere e intrare torra pro dontzi una."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Zlučovanie snímok obrazovky z viacerých displejov nie je momentálne podporované. Prepnite na jeden displej a skúste to znova."),
("screenshot-action-tip", "Vyberte, ako pokračovať so snímkou obrazovky."),
("Save as", "Uložiť ako"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportovať"),
("Export Logs", "Exportovať protokoly"),
("Import Folder", "Importovať priečinok"),
("Copy to clipboard", "Kopírovať do schránky"),
("Enable remote printer", "Povoliť vzdialenú tlačiareň"),
("Downloading {}", "Sťahuje sa {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Uzamknúť zobrazenie"),
("Sync clipboard between sessions", "Synchronizovať schránku medzi reláciami"),
("sync-clipboard-between-sessions-tip", "Text alebo obrázky skopírované v jednej vzdialenej relácii sa odošlú aj do schránky ostatných pripojených relácií."),
("Enable WebRTC P2P connection", "Povoliť pripojenie WebRTC P2P"),
("Enable TCP hole punching", "Povoliť TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Povoliť"),
("Reuse one connection for port forwarding", "Znovu použiť jedno pripojenie na presmerovanie portov"),
("port-forward-mux-tip", "Vedie všetky pripojenia jedného presmerovania portov cez jediné pripojenie k druhej strane namiesto opakovaného pripájania a prihlasovania pre každé z nich."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Združevanje posnetkov zaslona z več zaslonov trenutno ni podprto. Preklopite na en zaslon in poskusite znova."),
("screenshot-action-tip", "Izberite, kako nadaljevati s posnetkom zaslona."),
("Save as", "Shrani kot"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Izvozi"),
("Export Logs", "Izvozi dnevnike"),
("Import Folder", "Uvozi mapo"),
("Copy to clipboard", "Kopiraj v odložišče"),
("Enable remote printer", "Omogoči oddaljeni tiskalnik"),
("Downloading {}", "Prenašanje {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Zakleni platno"),
("Sync clipboard between sessions", "Sinhroniziraj odložišče med sejami"),
("sync-clipboard-between-sessions-tip", "Besedilo ali slike, kopirane v eni oddaljeni seji, se pošljejo tudi v odložišče vaših drugih povezanih sej."),
("Enable WebRTC P2P connection", "Omogoči povezavo WebRTC P2P"),
("Enable TCP hole punching", "Omogoči preboj lukenj TCP"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Omogoči"),
("Reuse one connection for port forwarding", "Ponovno uporabi eno povezavo za posredovanje vrat"),
("port-forward-mux-tip", "Vse povezave enega posredovanja vrat potekajo prek ene same povezave do druge strani, namesto ponovnega povezovanja in prijave za vsako od njih."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Bashkimi i pamjeve të ekranit nga disa ekrane aktualisht nuk mbështetet. Ju lutemi kaloni te një ekran i vetëm dhe provoni përsëri."),
("screenshot-action-tip", "Ju lutemi zgjidhni si të vazhdoni me pamjen e ekranit."),
("Save as", "Ruaj si"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Eksporto"),
("Export Logs", "Eksporto regjistrat"),
("Import Folder", "Importo dosjen"),
("Copy to clipboard", "Kopjo te clipboard"),
("Enable remote printer", "Aktivizo printerin në distancë"),
("Downloading {}", "Duke shkarkuar {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Kyç canvas"),
("Sync clipboard between sessions", "Sinkronizo clipboard-in midis sesioneve"),
("sync-clipboard-between-sessions-tip", "Teksti ose imazhet e kopjuara në një sesion të largët dërgohen edhe në clipboard-in e sesioneve të tjera të lidhura."),
("Enable WebRTC P2P connection", "Aktivizo lidhjen WebRTC P2P"),
("Enable TCP hole punching", "Aktivizo TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Aktivizo"),
("Reuse one connection for port forwarding", "Ripërdor një lidhje për përcjelljen e porteve"),
("port-forward-mux-tip", "Të gjitha lidhjet e një përcjelljeje portesh kalojnë përmes një lidhjeje të vetme me kompjuterin tjetër, në vend që të lidhet dhe të hyjë sërish për secilën prej tyre."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Spajanje snimaka ekrana sa više prikaza trenutno nije podržano. Molimo prebacite na jedan prikaz i pokušajte ponovo."),
("screenshot-action-tip", "Molimo izaberite kako da nastavite sa snimkom ekrana."),
("Save as", "Sačuvaj kao"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Izvoz"),
("Export Logs", "Izvoz dnevnika"),
("Import Folder", "Uvoz fascikle"),
("Copy to clipboard", "Kopiraj u clipboard"),
("Enable remote printer", "Omogući udaljeni štampač"),
("Downloading {}", "Preuzimanje {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Zaključaj pozadinu"),
("Sync clipboard between sessions", "Sinhronizuj klipbord između sesija"),
("sync-clipboard-between-sessions-tip", "Tekst ili slike kopirane u jednoj udaljenoj sesiji šalju se i u klipbord vaših ostalih povezanih sesija."),
("Enable WebRTC P2P connection", "Omogući WebRTC P2P konekciju"),
("Enable TCP hole punching", "Omogući TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Omogući"),
("Reuse one connection for port forwarding", "Ponovo koristi jednu vezu za prosleđivanje portova"),
("port-forward-mux-tip", "Sve veze jednog prosleđivanja portova idu kroz jednu vezu ka drugoj strani, umesto povezivanja i prijavljivanja iznova za svaku od njih."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Sammanslagning av skärmdumpar från flera skärmar stöds för närvarande inte. Byt till en enda skärm och försök igen."),
("screenshot-action-tip", "Välj hur du vill fortsätta med skärmdumpen."),
("Save as", "Spara som"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Exportera"),
("Export Logs", "Exportera loggar"),
("Import Folder", "Importera mapp"),
("Copy to clipboard", "Kppiera till urklipp"),
("Enable remote printer", "Aktivera fjärrskrivare"),
("Downloading {}", "Laddar ner {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Lås canvas"),
("Sync clipboard between sessions", "Synkronisera urklipp mellan sessioner"),
("sync-clipboard-between-sessions-tip", "Text eller bilder som kopieras i en fjärrsession skickas även till urklipp i dina andra anslutna sessioner."),
("Enable WebRTC P2P connection", "Aktivera WebRTC P2P anslutning"),
("Enable TCP hole punching", "Aktivera TCP hålslagning"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Aktivera"),
("Reuse one connection for port forwarding", "Återanvänd en anslutning för portvidarebefordran"),
("port-forward-mux-tip", "Låt alla anslutningar i en portvidarebefordran gå via en enda anslutning till motparten, i stället för att ansluta och logga in på nytt för varje anslutning."),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "ஸ்கிரீன்ஷாட்_இணைக்கப்பட்ட_திரை_ஆதரவற்ற_குறிப்பு"),
("screenshot-action-tip", "ஸ்கிரீன்ஷாட்_செயல்_குறிப்பு"),
("Save as", "இப்படி சேமி"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "ஏற்றுமதி"),
("Export Logs", "பதிவுகளை ஏற்றுமதி செய்"),
("Import Folder", "கோப்புறையை இறக்குமதி செய்"),
("Copy to clipboard", "கிளிப்போர்டில் நகல்"),
("Enable remote printer", "தொலை அச்சுப்பொறி இயக்கு"),
("Downloading {}", "{} பதிவிறக்குகிறது"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "கேன்வாஸைப் பூட்டு"),
("Sync clipboard between sessions", "அமர்வுகளுக்கு இடையே கிளிப்போர்டை ஒத்திசைக்கவும்"),
("sync-clipboard-between-sessions-tip", "ஒரு தொலை அமர்வில் நகலெடுக்கப்பட்ட உரை அல்லது படங்கள் உங்கள் பிற இணைக்கப்பட்ட அமர்வுகளின் கிளிப்போர்டுக்கும் அனுப்பப்படும்."),
("Enable WebRTC P2P connection", "WebRTC P2P இணைப்பு இயக்கு"),
("Enable TCP hole punching", "TCP hole punching இயக்கு"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "இயக்கு"),
("Reuse one connection for port forwarding", "போர்ட் ஃபார்வேர்டிங்கிற்கு ஒரே இணைப்பை மீண்டும் பயன்படுத்து"),
("port-forward-mux-tip", "ஒரு போர்ட் ஃபார்வேர்டிங்கின் அனைத்து இணைப்புகளும் மறுமுனைக்கான ஒரே இணைப்பின் வழியாகச் செல்லும், ஒவ்வொன்றுக்கும் மீண்டும் இணைந்து உள்நுழைவதற்குப் பதிலாக."),
].iter().cloned().collect();
}

View File

@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", ""),
("Sync clipboard between sessions", ""),
("sync-clipboard-between-sessions-tip", ""),
("Enable WebRTC P2P connection", ""),
("Enable TCP hole punching", ""),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", ""),
("Reuse one connection for port forwarding", ""),
("port-forward-mux-tip", ""),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "ขณะนี้ยังไม่รองรับการรวมภาพหน้าจอจากหลายจอแสดงผล กรุณาสลับไปใช้จอแสดงผลเดียวแล้วลองใหม่"),
("screenshot-action-tip", "กรุณาเลือกวิธีดำเนินการต่อกับภาพหน้าจอ"),
("Save as", "บันทึกเป็น"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "ส่งออก"),
("Export Logs", "ส่งออกบันทึกการทำงาน"),
("Import Folder", "นำเข้าโฟลเดอร์"),
("Copy to clipboard", "คัดลอกไปยังคลิปบอร์ด"),
("Enable remote printer", "เปิดใช้งานเครื่องพิมพ์ระยะไกล"),
("Downloading {}", "กำลังดาวน์โหลด {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "ล็อคแคนวาส"),
("Sync clipboard between sessions", "ซิงค์คลิปบอร์ดระหว่างเซสชัน"),
("sync-clipboard-between-sessions-tip", "ข้อความหรือรูปภาพที่คัดลอกในเซสชันระยะไกลหนึ่งจะถูกส่งไปยังคลิปบอร์ดของเซสชันอื่นที่เชื่อมต่ออยู่ด้วย"),
("Enable WebRTC P2P connection", "เปิดใช้งานการเชื่อมต่อ P2P แบบ WebRTC"),
("Enable TCP hole punching", "เปิดใช้งาน TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "เปิดใช้งาน"),
("Reuse one connection for port forwarding", "ใช้การเชื่อมต่อเดียวร่วมกันสำหรับการส่งต่อพอร์ต"),
("port-forward-mux-tip", "ส่งการเชื่อมต่อทั้งหมดของการส่งต่อพอร์ตหนึ่งรายการผ่านการเชื่อมต่อเดียวไปยังอีกฝ่าย แทนการเชื่อมต่อและเข้าสู่ระบบใหม่ทุกครั้ง"),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Birden fazla ekranın ekran görüntülerinin birleştirilmesi şu anda desteklenmiyor. Lütfen tek bir ekrana geçin ve tekrar deneyin."),
("screenshot-action-tip", "Lütfen ekran görüntüsüyle nasıl devam edeceğinizi seçin."),
("Save as", "Farklı kaydet"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Dışa aktar"),
("Export Logs", "Günlükleri dışa aktar"),
("Import Folder", "Klasör içe aktar"),
("Copy to clipboard", "Panoya kopyala"),
("Enable remote printer", "Uzak yazıcıyı etkinleştir"),
("Downloading {}", "{} indiriliyor"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Tuvali kilitle"),
("Sync clipboard between sessions", "Oturumlar arasında panoyu senkronize et"),
("sync-clipboard-between-sessions-tip", "Bir uzak oturumda kopyalanan metin veya görseller, bağlı diğer oturumlarınızın panosuna da gönderilir."),
("Enable WebRTC P2P connection", "WebRTC P2P bağlantısını etkinleştir"),
("Enable TCP hole punching", "TCP delik açmayı etkinleştir"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Etkinleştir"),
("Reuse one connection for port forwarding", "Port yönlendirme için tek bağlantıyı yeniden kullan"),
("port-forward-mux-tip", "Bir port yönlendirmesindeki tüm bağlantıları, her biri için yeniden bağlanıp oturum açmak yerine karşı tarafa açılan tek bir bağlantı üzerinden taşır."),
].iter().cloned().collect();
}

View File

@@ -187,7 +187,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Enter your password", "輸入您的密碼"),
("Logging in...", "正在登入..."),
("Enable RDP session sharing", "啟用 RDP 工作階段分享"),
("Auto Login", "自動登入 (只在您設定「工作階段結束後鎖定」時有效)"),
("Auto Login", "自動登入只在您設定「工作階段結束後鎖定」時有效"),
("Enable direct IP access", "啟用 IP 直接存取"),
("Rename", "重新命名"),
("Space", "空白"),
@@ -300,7 +300,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Language", "語言"),
("Keep RustDesk background service", "保持 RustDesk 後台服務"),
("Ignore Battery Optimizations", "忽略電池最佳化"),
("android_open_battery_optimizations_tip", "如果您想要停用此功能,請前往下一個 RustDesk 應用程式設定頁面,找到並進入「電池」,取消勾選「不受限制」"),
("android_open_battery_optimizations_tip", "如果您想要停用此功能,請前往下一個 RustDesk 應用程式設定頁面,找到並進入「電池」,取消勾選「不受限制」"),
("Start on boot", "開機時啟動"),
("Start the screen sharing service on boot, requires special permissions", "開機時啟動螢幕分享服務,需要特殊權限。"),
("Connection not allowed", "不允許連線"),
@@ -519,11 +519,11 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("I Agree", "同意"),
("Decline", "拒絕"),
("Timeout in minutes", "超時(分鐘)"),
("auto_disconnect_option_tip", "自動在連入的使用者不活躍時關閉工作階段"),
("auto_disconnect_option_tip", "自動關閉不活躍的連入工作階段"),
("Connection failed due to inactivity", "由於長時間沒有操作,已自動關閉工作階段"),
("Check for software update on startup", "啟動時檢查更新"),
("upgrade_rustdesk_server_pro_to_{}_tip", "請升級專業版伺服器到{}或更高版本!"),
("pull_group_failed_tip", "獲取群組訊息失敗"),
("pull_group_failed_tip", "重新整理群組失敗"),
("Filter by intersection", "按照交集篩選"),
("Remove wallpaper during incoming sessions", "在接受連入連線時移除桌布"),
("Test", "測試"),
@@ -639,7 +639,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Use D3D rendering", "使用 D3D 渲染"),
("Printer", "印表機"),
("printer-os-requirement-tip", "印表機的傳出功能需要 Windows 10 或更高版本。"),
("printer-requires-installed-{}-client-tip", "為了使用遠端列印功能,請安裝 {} 到此設備"),
("printer-requires-installed-{}-client-tip", "為了使用遠端列印功能,請安裝 {} 到此裝置"),
("printer-{}-not-installed-tip", "{} 印表機未安裝。"),
("printer-{}-ready-tip", "{} 印表機已安裝,您可以使用列印功能了。"),
("Install {} Printer", "安裝 {} 印表機"),
@@ -659,17 +659,17 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "目前不支援合併多個螢幕的截圖。請切換至單一螢幕後再試。"),
("screenshot-action-tip", "請選擇要如何處理這張截圖。"),
("Save as", "另存為"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "匯出"),
("Export Logs", "匯出日誌"),
("Import Folder", "匯入資料夾"),
("Copy to clipboard", "複製到剪貼簿"),
("Enable remote printer", "啟用遠端列印"),
("Downloading {}", "正在下載 {} 並安裝新版本。"),
("{} Update", "{} 更新"),
("{}-to-update-tip", "即將關閉 {} 並安裝新版本。"),
("download-new-version-failed-tip", "下載失敗,您可以重試或點\"下載\"按鈕以從發布網址下載,並手動升級。"),
("download-new-version-failed-tip", "下載失敗,您可以重試或點\"下載\"按鈕以從發布網址下載,並手動升級。"),
("Auto update", "自動更新"),
("update-failed-check-msi-tip", "安裝方式偵測失敗,請點\"下載\"按鈕以從發布網址下載,並手動升級。"),
("update-failed-check-msi-tip", "安裝方式偵測失敗,請點\"下載\"按鈕以從發布網址下載,並手動升級。"),
("websocket_tip", "使用 WebSocket 時,只支援使用中繼連接。"),
("Use WebSocket", "使用 WebSocket"),
("Trackpad speed", "觸控板速度"),
@@ -680,7 +680,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("View camera", "檢視相機"),
("Enable camera", "允許查看鏡頭"),
("No cameras", "沒有鏡頭"),
("view_camera_unsupported_tip", "您的遠端設備不支援查看鏡頭"),
("view_camera_unsupported_tip", "您的遠端裝置不支援查看鏡頭"),
("Terminal", "終端機"),
("Enable terminal", "啟用終端機"),
("New tab", "新分頁"),
@@ -690,7 +690,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Failed to get user token.", "取得使用者權杖失敗"),
("Incorrect username or password.", "使用者名稱或密碼不正確"),
("The user is not an administrator.", "使用者並不是系統管理員"),
("Failed to check if the user is an administrator.", "檢查使用者是否系統管理員時失敗了"),
("Failed to check if the user is an administrator.", "無法確認使用者是否系統管理員"),
("Supported only in the installed version.", "僅支援於已安裝的版本"),
("elevation_username_tip", "輸入使用者名稱或網域\\使用者名稱"),
("Preparing for installation ...", "正在準備安裝..."),
@@ -747,23 +747,26 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Show monitor switch button on the main toolbar", "在主工具列上顯示螢幕切換按鈕"),
("Show on the minimized toolbar", "在最小化工具列上顯示"),
("All monitors", "所有顯示器"),
("#{} monitor", "{}號顯示器"),
("conn-e2ee-unavailable-tip", "無法驗證端端加密。\n遠端裝置可能仍在準備中,請稍後試。\n如果此問題持續發生,伺服器可能不受信任。\n仍要繼續嗎?"),
("#{} monitor", "{} 號顯示器"),
("conn-e2ee-unavailable-tip", "無法驗證端端加密。\n遠端裝置可能仍在準備中,請稍後試。\n如果此問題持續發生,伺服器可能不受信任。\n仍要繼續嗎?"),
("ID whitelisting", "ID 白名單"),
("Use ID whitelisting", "只允許白名單上的 ID 進行連線"),
("id_whitelist_tip", "只有白名單上的 ID 可以存取"),
("id_whitelist_wildcard_tip", "支援萬用字元:'*' 符合任意數量的字元,'?' 符合單一字元"),
("id_whitelist_wildcard_tip", "支援萬用字元:'*' 符合任意數量的字元,'?' 符合單一字元"),
("Invalid ID", "ID 無效"),
("Your ID is blocked by the peer", "的 ID 已被對方封鎖"),
("Your ip is blocked by the peer", "的 IP 已被對方封鎖"),
("id_whitelist_caveat_tip", "ID 由對端戶端回報白名單用於減少暴露面,不能取代密碼或 2FA"),
("Your ID is blocked by the peer", "的 ID 已被對方封鎖"),
("Your ip is blocked by the peer", "的 IP 已被對方封鎖"),
("id_whitelist_caveat_tip", "ID 由對端戶端回報。此白名單用於減少暴露面,不能取代密碼或 2FA"),
("whitelist_cidr_tip", "支援 CIDR 寫法,例如 192.168.1.0/24"),
("Continue", "繼續"),
("Browser didn't open? Use the url below to sign in.", "瀏覽器未開啟?請使用下方網址登入。"),
("Lock canvas", "鎖定畫布"),
("Sync clipboard between sessions", "在工作階段間同步剪貼簿"),
("sync-clipboard-between-sessions-tip", "在一個遠端工作階段中複製的文字或圖片也會傳送到其他已連線工作階段的剪貼簿。"),
("Enable WebRTC P2P connection", "啟用 WebRTC P2P 連線"),
("Enable TCP hole punching", "啟用 TCP 打洞"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "啟用"),
("Reuse one connection for port forwarding", "連接埠轉送重複使用同一條連線"),
("port-forward-mux-tip", "同一條連接埠轉送規則上的所有連線共用一條到對方的連線,而不是每條連線都重新連線並登入一次。"),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Об'єднання знімків кількох дисплеїв наразі не підтримується. Перейдіть на один дисплей і спробуйте знову."),
("screenshot-action-tip", "Виберіть, що робити зі знімком екрана."),
("Save as", "Зберегти як"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Експортувати"),
("Export Logs", "Експортувати журнали"),
("Import Folder", "Імпортувати теку"),
("Copy to clipboard", "Скопіювати до буфера обміну"),
("Enable remote printer", "Увімкнути віддалений принтер"),
("Downloading {}", "Завантаження {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Блокування полотна"),
("Sync clipboard between sessions", "Синхронізувати буфер обміну між сеансами"),
("sync-clipboard-between-sessions-tip", "Текст або зображення, скопійовані в одному віддаленому сеансі, також надсилаються до буфера обміну інших підключених сеансів."),
("Enable WebRTC P2P connection", "Увімкнути P2P-підключення через WebRTC"),
("Enable TCP hole punching", "Увімкнути TCP hole punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Увімкнути"),
("Reuse one connection for port forwarding", "Використовувати одне з'єднання для перенаправлення портів"),
("port-forward-mux-tip", "Передавати всі з'єднання одного перенаправлення портів через одне з'єднання з віддаленим пристроєм замість повторного під'єднання та входу для кожного з них."),
].iter().cloned().collect();
}

View File

@@ -3,7 +3,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
[
("Status", "حالت"),
("Your Desktop", "آپ کا ڈیسک ٹاپ"),
("desk_tip", ""),
("desk_tip", "آپ کے ڈیسک ٹاپ تک اس ID اور پاس ورڈ کے ذریعے رسائی حاصل کی جا سکتی ہے۔"),
("Password", "پاس ورڈ"),
("Ready", "تیار"),
("Established", "قائم کیا گیا"),
@@ -12,7 +12,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Start service", "سروس شروع کریں"),
("Service is running", "سروس چل رہی ہے"),
("Service is not running", "سروس نہیں چل رہی ہے"),
("not_ready_status", ""),
("not_ready_status", "تیار نہیں۔ براہِ کرم اپنا کنکشن جانچیں"),
("Control Remote Desktop", "ریموٹ ڈیسک ٹاپ کو کنٹرول کریں"),
("Transfer file", "فائل منتقل کریں"),
("Connect", "کنیکٹ کریں"),
@@ -41,12 +41,11 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("length %min% to %max%", "لمبائی %min% سے %max%"),
("starts with a letter", "حرف سے شروع ہوتا ہے"),
("allowed characters", "اجازت یافتہ حروف"),
("id_change_tip", ""),
("id_change_tip", "صرف a-z، A-Z، 0-9، - (ڈیش) اور _ (انڈر اسکور) حروف کی اجازت ہے۔ پہلا حرف a-z یا A-Z ہونا چاہیے۔ لمبائی 6 سے 16 کے درمیان ہو۔"),
("Website", "ویب سائٹ"),
("About", "کے بارے میں"),
("Slogan_tip", "سلوگن_ٹپ"),
("Privacy Statement", "رازداری کا بیان"),
("License", "لائسنس"),
("Mute", "خاموش"),
("Build Date", "بنیاد کی تاریخ"),
("Version", "ورژن"),
@@ -149,21 +148,20 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("install_tip", "انسٹال کرنے کا مشورہ"),
("Click to upgrade", "اپگریڈ کرنے کے لئے کلک کریں"),
("Configure", "ترتیب دینا"),
("config_acc", ""),
("config_screen", ""),
("config_acc", "اپنے ڈیسک ٹاپ کو دور سے کنٹرول کرنے کے لیے آپ کو RustDesk کو \"Accessibility\" کی اجازتیں دینا ہوں گی۔"),
("config_screen", "اپنے ڈیسک ٹاپ تک دور سے رسائی کے لیے آپ کو RustDesk کو \"Screen Recording\" کی اجازتیں دینا ہوں گی۔"),
("Installing ...", "انسٹال ہو رہا ہے..."),
("Install", "انسٹال کریں"),
("Installation", "انسٹالیشن"),
("Installation Path", "انسٹالیشن کا راستہ"),
("Create start menu shortcuts", "اسٹارٹ مینو شارٹ کٹس بنائیں"),
("Create desktop icon", "ڈیسکٹاپ آئیکن بنائیں"),
("agreement_tip", ""),
("agreement_tip", "انسٹالیشن شروع کرنے سے آپ لائسنس معاہدہ قبول کرتے ہیں۔"),
("Accept and Install", "قبول کریں اور انسٹال کریں"),
("End-user license agreement", "اختتامی صارف کے لائسنس کا معاہدہ"),
("Generating ...", "بنا رہے ہیں..."),
("Your installation is lower version.", "آپ کی تنصیب کم ورژن ہے۔"),
("Please install the latest version.", "براہِ مہربانی تازہ ترین ورژن انسٹال کریں۔"),
("not_close_tcp_tip", ""),
("not_close_tcp_tip", "جب تک آپ ٹنل استعمال کر رہے ہیں، یہ ونڈو بند نہ کریں"),
("Listening ...", "سن رہا ہے..."),
("Remote Host", "ریموٹ میزبان"),
("Remote Port", "ریموٹ پورٹ"),
@@ -212,7 +210,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Run without install", "انسٹال کے بغیر چلائیں"),
("Connect via relay", "ریلے کے ذریعے کنیکٹ کریں"),
("Always connect via relay", "ہمیشہ ریلے کے ذریعے کنیکٹ کریں"),
("whitelist_tip", ""),
("whitelist_tip", "صرف وائٹ لسٹ میں شامل IP مجھ تک رسائی حاصل کر سکتے ہیں"),
("Login", "لاگ ان کریں"),
("Verify", "تصدیق کریں"),
("Remember me", "یاد رکھیں"),
@@ -222,7 +220,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Logout", "لاگ آؤٹ"),
("Tags", "ٹیگز"),
("Search ID", "ID تلاش کریں"),
("whitelist_sep", ""),
("whitelist_sep", "کوما، سیمی کولن، خالی جگہ یا نئی سطر سے الگ کریں"),
("Add ID", "ID شامل کریں"),
("Add Tag", "ٹیگ شامل کریں"),
("Unselect all tags", "تمام ٹیگز کو غیر منتخب کریں"),
@@ -241,7 +239,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Socks5 Proxy", "پروکسی ساکس5"),
("Socks5/Http(s) Proxy", "ساکس5/Http(s) پروکسی"),
("Discovered", "دریافت شدہ"),
("install_daemon_tip", ""),
("install_daemon_tip", "بوٹ پر شروع ہونے کے لیے آپ کو سسٹم سروس انسٹال کرنا ہوگی۔"),
("Remote ID", "ریموٹ ID"),
("Paste", "چسپاں کریں"),
("Paste here?", "یہاں چسپاں کریں؟"),
@@ -278,14 +276,14 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Do you accept?", "کیا آپ قبول کرتے ہیں؟"),
("Open System Setting", "سسٹم کی ترتیبات کھولیں"),
("How to get Android input permission?", "Android کی درآمد کی اجازت کیسے حاصل کریں؟"),
("android_input_permission_tip1", ""),
("android_input_permission_tip2", ""),
("android_new_connection_tip", ""),
("android_service_will_start_tip", ""),
("android_stop_service_tip", ""),
("android_version_audio_tip", ""),
("android_start_service_tip", ""),
("android_permission_may_not_change_tip", ""),
("android_input_permission_tip1", "کسی دور دراز آلے کو ماؤس یا ٹچ کے ذریعے آپ کے Android آلے کو کنٹرول کرنے کے لیے آپ کو RustDesk کو \"Accessibility\" سروس استعمال کرنے کی اجازت دینا ہوگی۔"),
("android_input_permission_tip2", "براہِ کرم اگلے سسٹم سیٹنگز صفحے پر جائیں، [Installed Services] تلاش کر کے کھولیں اور [RustDesk Input] سروس آن کریں۔"),
("android_new_connection_tip", "ایک نئی کنٹرول درخواست موصول ہوئی ہے، جو آپ کے موجودہ آلے کو کنٹرول کرنا چاہتی ہے۔"),
("android_service_will_start_tip", "\"Screen Capture\" آن کرنے سے سروس خودکار طور پر شروع ہو جائے گی، جس سے دوسرے آلات آپ کے آلے سے کنکشن کی درخواست کر سکیں گے۔"),
("android_stop_service_tip", "سروس بند کرنے سے تمام قائم شدہ کنکشن خودکار طور پر بند ہو جائیں گے۔"),
("android_version_audio_tip", "موجودہ Android ورژن آڈیو کیپچر کی حمایت نہیں کرتا، براہِ کرم Android 10 یا اس سے نئے ورژن پر اپ گریڈ کریں۔"),
("android_start_service_tip", "اسکرین شیئرنگ سروس شروع کرنے کے لیے [Start service] پر ٹیپ کریں یا [Screen Capture] کی اجازت فعال کریں۔"),
("android_permission_may_not_change_tip", "قائم شدہ کنکشنز کی اجازتیں دوبارہ منسلک ہونے تک فوراً تبدیل نہیں ہو سکتیں۔"),
("Account", "کھاتا"),
("Overwrite", "اوور رائٹ کریں"),
("This file exists, skip or overwrite this file?", "یہ فائل موجود ہے، اس فائل کو چھوڑیں یا اوور رائٹ کریں؟"),
@@ -296,14 +294,13 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Someone turns on privacy mode, exit", "کوئی پرائیویسی موڈ آن کرتا ہے، باہر نکلیں"),
("Unsupported", "غیر معاون"),
("Peer denied", "ہم منسب نے انکار کر دیا"),
("Please install plugins", "براہِ مہربانی پلگ ان انسٹال کریں"),
("Peer exit", "ہم منسب باہر نکل گیا"),
("Failed to turn off", "بند کرنے میں ناکام"),
("Turned off", "بند کر دیا"),
("Language", "زبان"),
("Keep RustDesk background service", "RustDesk پس منظر کی خدمت کو برقرار رکھیں"),
("Ignore Battery Optimizations", "بیٹری کی اصلاحات کو نظر انداز کریں"),
("android_open_battery_optimizations_tip", ""),
("android_open_battery_optimizations_tip", "اگر آپ یہ خصوصیت بند کرنا چاہتے ہیں تو براہِ کرم اگلے RustDesk ایپلیکیشن سیٹنگز صفحے پر جائیں، [Battery] تلاش کر کے کھولیں اور [Unrestricted] کا نشان ہٹا دیں"),
("Start on boot", "شروع کرنے پر شروع کریں"),
("Start the screen sharing service on boot, requires special permissions", "بوٹ پر سکرین شیئرنگ سروس شروع کریں، خاص اجازتوں کی ضرورت ہے"),
("Connection not allowed", "جڑنے کی اجازت نہیں ہے"),
@@ -317,7 +314,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Restart remote device", "ریموٹ ڈیوائس کو ری اسٹارٹ کریں"),
("Are you sure you want to restart", "کیا آپ واقعی ری اسٹارٹ کرنا چاہتے ہیں؟"),
("Restarting remote device", "ریموٹ ڈیوائس ری اسٹارٹ ہو رہی ہے"),
("remote_restarting_tip", ""),
("remote_restarting_tip", "دور دراز آلہ دوبارہ شروع ہو رہا ہے، براہِ کرم یہ پیغام بند کریں اور کچھ دیر بعد مستقل پاس ورڈ کے ساتھ دوبارہ منسلک ہوں"),
("Copied", "نقل ہو گیا"),
("Exit Fullscreen", "مکمل سکرین سے باہر نکلیں"),
("Fullscreen", "مکمل سکرین"),
@@ -408,19 +405,19 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Closed manually by web console", "ویب کنسول کے ذریعے دستی طور پر بند کیا گیا"),
("Local keyboard type", "مقامی کیبورڈ کا قسم"),
("Select local keyboard type", "مقامی کیبورڈ کا قسم منتخب کریں"),
("software_render_tip", ""),
("software_render_tip", "اگر آپ Linux پر Nvidia گرافکس کارڈ استعمال کر رہے ہیں اور منسلک ہونے کے فوراً بعد ریموٹ ونڈو بند ہو جاتی ہے، تو اوپن سورس Nouveau ڈرائیور پر منتقل ہونا اور سافٹ ویئر رینڈرنگ کا انتخاب مددگار ہو سکتا ہے۔ سافٹ ویئر کو دوبارہ شروع کرنا ضروری ہے۔"),
("Always use software rendering", "ہم sempre سافٹ ویر رینڈرنگ استعمال کریں"),
("config_input", "config_input"),
("config_microphone", ""),
("request_elevation_tip", ""),
("config_microphone", "دور سے بات کرنے کے لیے آپ کو RustDesk کو \"Record Audio\" کی اجازتیں دینا ہوں گی۔"),
("request_elevation_tip", "اگر دوسری طرف کوئی موجود ہے تو آپ اختیارات میں اضافے کی درخواست بھی کر سکتے ہیں۔"),
("Wait", "انتظار کریں"),
("Elevation Error", "علیٰ کرنے کی خرابی"),
("Ask the remote user for authentication", "ریموٹ صارف سے تصدیق کے لیے پوچھیں"),
("Choose this if the remote account is administrator", "ریموٹ اکاؤنٹ ایڈمنسٹریٹر ہو تو یہ منتخب کریں"),
("Transmit the username and password of administrator", "ایڈمنسٹریٹر کا صارف نام اور پاس ورڈ پروگرام کے ذریعے بھیجیں"),
("still_click_uac_tip", ""),
("still_click_uac_tip", "پھر بھی ضروری ہے کہ دور دراز صارف چل رہے RustDesk کی UAC ونڈو پر OK پر کلک کرے۔"),
("Request Elevation", "علیٰ کرنے کا درخواست دیں"),
("wait_accept_uac_tip", ""),
("wait_accept_uac_tip", "براہِ کرم انتظار کریں کہ دور دراز صارف UAC ڈائیلاگ قبول کرے۔"),
("Elevate successfully", "علیٰ کامیابی سے ہو گئے"),
("uppercase", "بڑے حروف"),
("lowercase", "چھوٹے حروف"),
@@ -438,7 +435,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Default Image Quality", "ڈیفالٹ تصویر کی معیار"),
("Default Codec", "ڈیفالٹ کوڈک"),
("Bitrate", "بٹ ریٹ"),
("FPS", ""),
("FPS", "FPS"),
("Auto", "خودکار"),
("Other Default Options", "دوسروں ڈیفالٹ اختیارات"),
("Voice call", "صوتی کال"),
@@ -464,20 +461,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Empty Username", "خالی صارف نام"),
("Empty Password", "خالی پاس ورڈ"),
("Me", "میں"),
("identical_file_tip", ""),
("show_monitors_tip", ""),
("identical_file_tip", "یہ فائل دوسری طرف موجود فائل کے بالکل یکساں ہے۔"),
("show_monitors_tip", "ٹول بار میں مانیٹر دکھائیں"),
("View Mode", "دیکھنے کا طریقہ"),
("login_linux_tip", "login_linux_tip"),
("verify_rustdesk_password_tip", ""),
("remember_account_tip", ""),
("os_account_desk_tip", ""),
("OS Account", "OS اکاؤنٹ"),
("another_user_login_title_tip", ""),
("another_user_login_text_tip", ""),
("xorg_not_found_title_tip", ""),
("xorg_not_found_text_tip", ""),
("no_desktop_title_tip", ""),
("no_desktop_text_tip", ""),
("verify_rustdesk_password_tip", "RustDesk پاس ورڈ کی تصدیق کریں"),
("No need to elevate", "اپنے کو ہیں نہیں"),
("System Sound", "سسٹم سائونڈ"),
("Default", "ڈیفالٹ"),
@@ -485,30 +472,24 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Fingerprint", "فنگر پرنٹ"),
("Copy Fingerprint", "فنگر پرنٹ کاپی کریں"),
("no fingerprints", "کوئی فنگر پرنٹ نہیں"),
("Select a peer", "ایک پیر منتخب کریں"),
("Select peers", "پیرز منتخب کریں"),
("Plugins", "پلگ انز"),
("Uninstall", "ان انسٹال کریں"),
("Update", "اپڈیٹ کریں"),
("Enable", "فعال کریں"),
("Disable", "غیر فعال کریں"),
("Options", "اختیارات"),
("resolution_original_tip", ""),
("resolution_fit_local_tip", ""),
("resolution_custom_tip", ""),
("resolution_original_tip", "اصل ریزولوشن"),
("resolution_fit_local_tip", "مقامی ریزولوشن کے مطابق"),
("resolution_custom_tip", "حسبِ ضرورت ریزولوشن"),
("Collapse toolbar", "ٹول بار کو سکڑیں"),
("Accept and Elevate", "قبول کریں اور علیٰ کریں"),
("accept_and_elevate_btn_tooltip", ""),
("clipboard_wait_response_timeout_tip", ""),
("accept_and_elevate_btn_tooltip", "کنکشن قبول کریں اور UAC اجازتیں بڑھائیں۔"),
("clipboard_wait_response_timeout_tip", "کاپی کے جواب کا انتظار ختم ہو گیا۔"),
("Incoming connection", "آنے والا کنکشن"),
("Outgoing connection", "جانے والا کنکشن"),
("Exit", "خارج ہوں"),
("Open", "کھولیں"),
("logout_tip", ""),
("logout_tip", "کیا آپ واقعی لاگ آؤٹ کرنا چاہتے ہیں؟"),
("Service", "سروس"),
("Start", "شروع کریں"),
("Stop", "روک دیں"),
("exceed_max_devices", ""),
("exceed_max_devices", "آپ زیرِ انتظام آلات کی زیادہ سے زیادہ تعداد تک پہنچ چکے ہیں۔"),
("Sync with recent sessions", "پچھلے سیشنز کے ساتھ ہم آہنگ کریں"),
("Sort tags", "ٹیگز کو ترتیب دیں"),
("Open connection in new tab", "کنکشن کو نئے ٹیب میں کھولیں"),
@@ -517,14 +498,14 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Already exists", "پہلے سے موجود ہے"),
("Change Password", "پاسورڈ تبدیل کریں"),
("Refresh Password", "پاسورڈ ریفریش کریں"),
("ID", ""),
("ID", "ID"),
("Grid View", "گوڈ ویو"),
("List View", "لسٹ ویو"),
("Select", "منتخب کریں"),
("Toggle Tags", "ٹیگز ٹوگل کریں"),
("pull_ab_failed_tip", ""),
("push_ab_failed_tip", ""),
("synced_peer_readded_tip", ""),
("pull_ab_failed_tip", "ایڈریس بک تازہ کرنے میں ناکامی"),
("push_ab_failed_tip", "ایڈریس بک کو سرور سے ہم آہنگ کرنے میں ناکامی"),
("synced_peer_readded_tip", "حالیہ سیشنز میں موجود آلات دوبارہ ایڈریس بک سے ہم آہنگ کر دیے جائیں گے۔"),
("Change Color", "رنگ تبدیل کریں"),
("Primary Color", "پرائمری رنگ"),
("HSV Color", "HSV رنگ"),
@@ -539,11 +520,11 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("I Agree", "میں قبول کرتا ہوں"),
("Decline", "ناکام کریں"),
("Timeout in minutes", "منٹوں میں ٹائیم آؤٹ"),
("auto_disconnect_option_tip", ""),
("auto_disconnect_option_tip", "صارف کی غیر فعالی پر آنے والے سیشنز خودکار طور پر بند کریں"),
("Connection failed due to inactivity", "انفعال کی وजہ سے کنکشن ناکام ہو گیا"),
("Check for software update on startup", "سٹارٹ اپ پر سافٹ ویر اپڈیٹ کے لیے چیک کریں"),
("upgrade_rustdesk_server_pro_to_{}_tip", ""),
("pull_group_failed_tip", ""),
("upgrade_rustdesk_server_pro_to_{}_tip", "براہِ کرم RustDesk Server Pro کو ورژن {} یا اس سے نئے پر اپ گریڈ کریں!"),
("pull_group_failed_tip", "گروپ تازہ کرنے میں ناکامی"),
("Filter by intersection", "فلٹر بائی انسٹریکشن"),
("Remove wallpaper during incoming sessions", "ان کلینگ سیشنز کے دوران والپیپر کو ہٹائیں"),
("Test", "ٹیسٹ"),
@@ -552,7 +533,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Open in new window", "نئی ونڈو میں کھولیں"),
("Show displays as individual windows", "ڈسپلے کو افراد کے طور پر دکھائیں"),
("Use all my displays for the remote session", "ریموٹ سیشن کے لیے میرے تمام ڈسپلے استعمال کریں"),
("selinux_tip", ""),
("selinux_tip", "آپ کے آلے پر SELinux فعال ہے، جو RustDesk کو بطور کنٹرول شدہ فریق درست طور پر چلنے سے روک سکتا ہے۔"),
("Change view", "ویو تبدیل کریں"),
("Big tiles", "بڑے ٹائل"),
("Small tiles", "چھوٹے ٹائل"),
@@ -561,14 +542,14 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Plug out all", "تمام پلگ آؤٹ کریں"),
("True color (4:4:4)", "اصل رنگ (4:4:4)"),
("Enable blocking user input", "صارف ان پٹ کو روکنے کی اجازت دیں"),
("id_input_tip", ""),
("privacy_mode_impl_mag_tip", ""),
("privacy_mode_impl_virtual_display_tip", ""),
("id_input_tip", "آپ ایک ID، براہِ راست IP، یا پورٹ کے ساتھ ڈومین (<domain>:<port>) درج کر سکتے ہیں۔\nاگر آپ کسی دوسرے سرور پر موجود آلے تک رسائی چاہتے ہیں تو سرور کا پتہ ساتھ لگائیں (<id>@<server_address>?key=<key_value>)، مثلاً،\n9123456234@192.168.16.1:21117?key=5Qbwsde3unUcJBtrx9ZkvUmwFNoExHzpryHuPUdqlWM=۔\nاگر آپ کسی عوامی سرور پر موجود آلے تک رسائی چاہتے ہیں تو \"<id>@public\" درج کریں، عوامی سرور کے لیے کلید درکار نہیں۔\n\nاگر آپ پہلے کنکشن پر ریلے کنکشن کا استعمال لازمی کرنا چاہتے ہیں تو ID کے آخر میں \"/r\" شامل کریں، مثلاً، \"9123456234/r\"۔"),
("privacy_mode_impl_mag_tip", "موڈ 1"),
("privacy_mode_impl_virtual_display_tip", "موڈ 2"),
("Enter privacy mode", "خفیہ موڈ میں داخل ہوں"),
("Exit privacy mode", "خفیہ موڈ سے باہر نکلیں"),
("idd_not_support_under_win10_2004_tip", ""),
("input_source_1_tip", ""),
("input_source_2_tip", ""),
("idd_not_support_under_win10_2004_tip", "بالواسطہ ڈسپلے ڈرائیور معاون نہیں ہے۔ Windows 10 ورژن 2004 یا اس سے نیا درکار ہے۔"),
("input_source_1_tip", "ان پٹ ماخذ 1"),
("input_source_2_tip", "ان پٹ ماخذ 2"),
("Swap control-command key", "control-command کلید کو سوپ کریں"),
("swap-left-right-mouse", "بائی-دائی ماؤس کو سوپ کریں"),
("2FA code", "2FA کوڈ"),
@@ -582,8 +563,8 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Multiple Windows sessions found", "متعدد ونڈوز سیشن ملے"),
("Please select the session you want to connect to", "براہ کرم وہ سیشن منتخب کریں جس سے آپ منسلک ہونا چاہتے ہیں"),
("powered_by_me", "میں کی طرف سے طاقتور"),
("outgoing_only_desk_tip", ""),
("preset_password_warning", ""),
("outgoing_only_desk_tip", "یہ ایک حسبِ ضرورت ایڈیشن ہے۔\nآپ دوسرے آلات سے منسلک ہو سکتے ہیں، لیکن دوسرے آلات آپ کے آلے سے منسلک نہیں ہو سکتے۔"),
("preset_password_warning", "یہ حسبِ ضرورت ایڈیشن پہلے سے مقرر پاس ورڈ کے ساتھ آتا ہے۔ جو بھی یہ پاس ورڈ جانتا ہو وہ آپ کے آلے کا مکمل کنٹرول حاصل کر سکتا ہے۔ اگر آپ کو اس کی توقع نہیں تھی تو سافٹ ویئر فوراً ان انسٹال کر دیں۔"),
("Security Alert", "سیکورٹی الرٹ"),
("My address book", "میری ایڈریس بک"),
("Personal", "شخصی"),
@@ -593,25 +574,25 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Read-only", "صرف پڑھنے کے لیے"),
("Read/Write", "پڑھنے/لکھنے"),
("Full Control", "پورا کنٹرول"),
("share_warning_tip", ""),
("share_warning_tip", "اوپر دیے گئے خانے مشترکہ ہیں اور دوسروں کو نظر آتے ہیں۔"),
("Everyone", "ہر کوئی"),
("ab_web_console_tip", ""),
("allow-only-conn-window-open-tip", ""),
("no_need_privacy_mode_no_physical_displays_tip", ""),
("ab_web_console_tip", "ویب کنسول پر مزید"),
("allow-only-conn-window-open-tip", "کنکشن کی اجازت صرف اس صورت میں دیں جب RustDesk ونڈو کھلی ہو"),
("no_need_privacy_mode_no_physical_displays_tip", "کوئی طبعی ڈسپلے نہیں، پرائیویسی موڈ استعمال کرنے کی ضرورت نہیں۔"),
("Follow remote cursor", "ریموٹ کرسر کی پیروی کریں"),
("Follow remote window focus", "ریموٹ ونڈو فوکس کی پیروی کریں"),
("default_proxy_tip", ""),
("no_audio_input_device_tip", ""),
("default_proxy_tip", "پہلے سے طے شدہ پروٹوکول اور پورٹ Socks5 اور 1080 ہیں"),
("no_audio_input_device_tip", "کوئی آڈیو ان پٹ آلہ نہیں ملا۔"),
("Incoming", "آنے والے"),
("Outgoing", "بھیجے جا رہے"),
("Clear Wayland screen selection", "Wayland سکرین کی انتخاب صاف کریں"),
("clear_Wayland_screen_selection_tip", ""),
("confirm_clear_Wayland_screen_selection_tip", ""),
("android_new_voice_call_tip", ""),
("texture_render_tip", ""),
("clear_Wayland_screen_selection_tip", "اسکرین کا انتخاب صاف کرنے کے بعد آپ شیئر کرنے کے لیے اسکرین دوبارہ منتخب کر سکتے ہیں۔"),
("confirm_clear_Wayland_screen_selection_tip", "کیا آپ واقعی Wayland اسکرین کا انتخاب صاف کرنا چاہتے ہیں؟"),
("android_new_voice_call_tip", "ایک نئی صوتی کال کی درخواست موصول ہوئی۔ اگر آپ قبول کرتے ہیں تو آڈیو صوتی رابطے پر منتقل ہو جائے گا۔"),
("texture_render_tip", "تصاویر کو ہموار بنانے کے لیے ٹیکسچر رینڈرنگ استعمال کریں۔ اگر آپ کو رینڈرنگ کے مسائل درپیش ہوں تو یہ اختیار بند کر کے دیکھ سکتے ہیں۔"),
("Use texture rendering", "ٹیکسچر رینڈرنگ کا استعمال کریں"),
("Floating window", "فلوٹنگ ونڈو"),
("floating_window_tip", ""),
("floating_window_tip", "یہ RustDesk کی پس منظر سروس کو برقرار رکھنے میں مدد دیتا ہے"),
("Keep screen on", "سکرین کو آن رکھیں"),
("Never", "کبھی نہیں"),
("During controlled", "کنٹرول کے دوران"),
@@ -623,13 +604,13 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Volume down", "آواز کم کریں"),
("Power", "پاور"),
("Telegram bot", "ٹیلیگرام بات"),
("enable-bot-tip", ""),
("enable-bot-desc", ""),
("cancel-2fa-confirm-tip", ""),
("cancel-bot-confirm-tip", ""),
("enable-bot-tip", "اگر آپ یہ خصوصیت فعال کریں تو آپ اپنے بوٹ سے 2FA کوڈ وصول کر سکتے ہیں۔ یہ کنکشن کی اطلاع کے طور پر بھی کام کر سکتا ہے۔"),
("enable-bot-desc", "1. @BotFather کے ساتھ چیٹ کھولیں۔\n2. کمانڈ \"/newbot\" بھیجیں۔ یہ مرحلہ مکمل کرنے کے بعد آپ کو ایک ٹوکن ملے گا۔\n3. اپنے نئے بنائے گئے بوٹ کے ساتھ چیٹ شروع کریں۔ اسے فعال کرنے کے لیے فارورڈ سلیش (\"/\") سے شروع ہونے والا پیغام، جیسے \"/hello\"، بھیجیں۔\n"),
("cancel-2fa-confirm-tip", "کیا آپ واقعی 2FA منسوخ کرنا چاہتے ہیں؟"),
("cancel-bot-confirm-tip", "کیا آپ واقعی Telegram بوٹ منسوخ کرنا چاہتے ہیں؟"),
("About RustDesk", "رستڈیسک کے بارے میں"),
("Send clipboard keystrokes", "کلپ بورڈ کی چابیاں بھیجیں"),
("network_error_tip", ""),
("network_error_tip", "براہِ کرم اپنا نیٹ ورک کنکشن جانچیں، پھر دوبارہ کوشش پر کلک کریں۔"),
("Unlock with PIN", "PIN کے ساتھ انلاک کریں"),
("Requires at least {} characters", "کم از کم {} حروف کی ضرورت ہے"),
("Wrong PIN", "غلط PIN"),
@@ -638,56 +619,56 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Manage trusted devices", "معتبر آلے مینیج کریں"),
("Platform", "پلیٹ فارم"),
("Days remaining", "دن باقی"),
("enable-trusted-devices-tip", ""),
("enable-trusted-devices-tip", "قابلِ اعتماد آلات پر 2FA تصدیق چھوڑ دیں"),
("Parent directory", "والد ڈائرکٹری"),
("Resume", "جاری رکھیں"),
("Invalid file name", "غلط فائل کا نام"),
("one-way-file-transfer-tip", ""),
("one-way-file-transfer-tip", "کنٹرول شدہ فریق پر یک طرفہ فائل منتقلی فعال ہے۔"),
("Authentication Required", "توثیق کی ضرورت ہے"),
("Authenticate", "توثیق کریں"),
("web_id_input_tip", ""),
("web_id_input_tip", "آپ اسی سرور میں ایک ID درج کر سکتے ہیں، ویب کلائنٹ میں براہِ راست IP رسائی معاون نہیں ہے۔\nاگر آپ کسی دوسرے سرور پر موجود آلے تک رسائی چاہتے ہیں تو سرور کا پتہ ساتھ لگائیں (<id>@<server_address>?key=<key_value>)، مثلاً،\n9123456234@192.168.16.1:21117?key=5Qbwsde3unUcJBtrx9ZkvUmwFNoExHzpryHuPUdqlWM=۔\nاگر آپ کسی عوامی سرور پر موجود آلے تک رسائی چاہتے ہیں تو \"<id>@public\" درج کریں، عوامی سرور کے لیے کلید درکار نہیں۔"),
("Download", "ڈاؤن لوڈ کریں"),
("Upload folder", "اپ لوڈ فولڈر"),
("Upload files", "فائلیں اپ لوڈ کریں"),
("Clipboard is synchronized", "کلپ بورڈ مطابق ہے"),
("Update client clipboard", "کلپ بورڈ کو اپ ڈیٹ کریں"),
("Untagged", "غیر تعلق یافتہ"),
("new-version-of-{}-tip", ""),
("new-version-of-{}-tip", "{} کا ایک نیا ورژن دستیاب ہے"),
("Accessible devices", "قابلِ رسائی والے آلے"),
("upgrade_remote_rustdesk_client_to_{}_tip", ""),
("d3d_render_tip", ""),
("upgrade_remote_rustdesk_client_to_{}_tip", "براہِ کرم دور دراز فریق پر RustDesk کلائنٹ کو ورژن {} یا اس سے نئے پر اپ گریڈ کریں!"),
("d3d_render_tip", "جب D3D رینڈرنگ فعال ہو تو کچھ مشینوں پر ریموٹ کنٹرول اسکرین سیاہ ہو سکتی ہے۔"),
("Use D3D rendering", "D3D رینڈرنگ کا استعمال کریں"),
("Printer", "پرنٹر"),
("printer-os-requirement-tip", ""),
("printer-requires-installed-{}-client-tip", ""),
("printer-{}-not-installed-tip", ""),
("printer-{}-ready-tip", ""),
("printer-os-requirement-tip", "پرنٹر کی بیرونی خصوصیت کے لیے Windows 10 یا اس سے نیا درکار ہے۔"),
("printer-requires-installed-{}-client-tip", "دور دراز پرنٹنگ استعمال کرنے کے لیے اس آلے پر {} انسٹال ہونا ضروری ہے۔"),
("printer-{}-not-installed-tip", "{} پرنٹر انسٹال نہیں ہے۔"),
("printer-{}-ready-tip", "{} پرنٹر انسٹال ہے اور استعمال کے لیے تیار ہے۔"),
("Install {} Printer", " {} پرنٹر انسٹال کریں"),
("Outgoing Print Jobs", "بیرونی پرنٹ کام"),
("Incoming Print Jobs", "اندر کے پرنٹ کام"),
("Incoming Print Job", "اندر کا پرنٹ کام"),
("use-the-default-printer-tip", ""),
("use-the-selected-printer-tip", ""),
("auto-print-tip", ""),
("print-incoming-job-confirm-tip", ""),
("remote-printing-disallowed-tile-tip", ""),
("remote-printing-disallowed-text-tip", ""),
("save-settings-tip", ""),
("use-the-default-printer-tip", "پہلے سے طے شدہ پرنٹر استعمال کریں"),
("use-the-selected-printer-tip", "منتخب کردہ پرنٹر استعمال کریں"),
("auto-print-tip", "منتخب کردہ پرنٹر سے خودکار طور پر پرنٹ کریں۔"),
("print-incoming-job-confirm-tip", "آپ کو دور دراز سے ایک پرنٹ جاب موصول ہوئی۔ کیا آپ اسے اپنی طرف چلانا چاہتے ہیں؟"),
("remote-printing-disallowed-tile-tip", "دور دراز پرنٹنگ کی اجازت نہیں"),
("remote-printing-disallowed-text-tip", "کنٹرول شدہ فریق کی اجازت کی ترتیبات دور دراز پرنٹنگ سے انکار کرتی ہیں۔"),
("save-settings-tip", "ترتیبات محفوظ کریں"),
("dont-show-again-tip", " ٹپ دوبارہ نہ دکھائیں "),
("Take screenshot", "اسکرین شاٹ لیں"),
("Taking screenshot", "اسکرین شاٹ لے رہے ہیں"),
("screenshot-merged-screen-not-supported-tip", ""),
("screenshot-merged-screen-not-supported-tip", "متعدد ڈسپلے کے اسکرین شاٹس کو ملانا فی الحال معاون نہیں ہے۔ براہِ کرم ایک ڈسپلے پر منتقل ہو کر دوبارہ کوشش کریں۔"),
("screenshot-action-tip", "اسکرین شاٹ ایکشن ٹپ"),
("Save as", "حفظ کے طور پر"),
("Copy to clipboard", "کلپ بورڈ پر کاپی کریں"),
("Enable remote printer", "ریموٹ پرنٹر کو فعال کریں"),
("Downloading {}", "ڈاؤن لوڈ ہو رہا ہے {}"),
("{} Update", "{} اپ ڈیٹ"),
("{}-to-update-tip", ""),
("download-new-version-failed-tip", ""),
("{}-to-update-tip", "{} اب بند ہو کر نیا ورژن انسٹال کرے گا۔"),
("download-new-version-failed-tip", "ڈاؤن لوڈ ناکام۔ آپ دوبارہ کوشش کر سکتے ہیں یا \"Download\" بٹن پر کلک کر کے ریلیز صفحے سے ڈاؤن لوڈ کر کے دستی طور پر اپ گریڈ کر سکتے ہیں۔"),
("Auto update", "خودکار اپ ڈیٹ"),
("update-failed-check-msi-tip", ""),
("websocket_tip", ""),
("update-failed-check-msi-tip", "انسٹالیشن کے طریقے کی جانچ ناکام۔ براہِ کرم \"Download\" بٹن پر کلک کر کے ریلیز صفحے سے ڈاؤن لوڈ کریں اور دستی طور پر اپ گریڈ کریں۔"),
("websocket_tip", "WebSocket استعمال کرتے وقت صرف ریلے کنکشنز معاون ہیں۔"),
("Use WebSocket", "WebSocket استعمال کریں"),
("Trackpad speed", "ٹریک پیڈ کی رفتار"),
("Default trackpad speed", "ڈیفالٹ ٹریک پیڈ کی رفتار"),
@@ -709,7 +690,7 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("The user is not an administrator.", "صارف ایڈمنسٹریٹر نہیں ہے"),
("Failed to check if the user is an administrator.", "صارف ایڈمنسٹریٹر ہے یا نہیں چیک کرنے میں ناکام"),
("Supported only in the installed version.", "صرف انسٹال شدہ ورژن میں معاونت کی جاتی ہے۔"),
("elevation_username_tip", ""),
("elevation_username_tip", "صارف نام یا ڈومین صارف نام درج کریں"),
("Preparing for installation ...", "انسٹالیشن کی تیاری ..."),
("Show my cursor", "میرا کرسر دکھائیں"),
("Scale custom", "اپنی مرضی کے مطابق پیمانہ"),
@@ -725,26 +706,68 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Alias", "عرف نام"),
("ScrollEdge", "اسکرول ایج"),
("Allow insecure TLS fallback", "غیر محفوظ TLS فالبیک کی اجازت دیں"),
("allow-insecure-tls-fallback-tip", ""),
("allow-insecure-tls-fallback-tip", "پہلے سے طے شدہ طور پر RustDesk TLS استعمال کرنے والے پروٹوکولز کے لیے سرور کے سرٹیفکیٹ کی تصدیق کرتا ہے۔\nیہ اختیار فعال ہونے پر، تصدیق ناکام ہونے کی صورت میں RustDesk تصدیق کا مرحلہ چھوڑ کر آگے بڑھ جائے گا۔"),
("Disable UDP", "UDP کو غیر فعال کریں"),
("disable-udp-tip", ""),
("server-oss-not-support-tip", ""),
("disable-udp-tip", "طے کرتا ہے کہ صرف TCP استعمال کیا جائے یا نہیں۔\nیہ اختیار فعال ہونے پر RustDesk UDP 21116 مزید استعمال نہیں کرے گا، اس کی جگہ TCP 21116 استعمال ہوگا۔"),
("server-oss-not-support-tip", "نوٹ: RustDesk سرور OSS میں یہ خصوصیت شامل نہیں ہے۔"),
("input note here", "نوٹ یہاں درج کریں"),
("note-at-conn-end-tip", ""),
("note-at-conn-end-tip", "کنکشن کے اختتام پر نوٹ کے لیے پوچھیں"),
("Show terminal extra keys", "ٹرمنل اضافی کیز دکھائیں"),
("Relative mouse mode", "رشتہ دار ماؤس موڈ"),
("rel-mouse-not-supported-peer-tip", ""),
("rel-mouse-not-ready-tip", ""),
("rel-mouse-lock-failed-tip", ""),
("rel-mouse-exit-{}-tip", ""),
("rel-mouse-permission-lost-tip", ""),
("rel-mouse-not-supported-peer-tip", "منسلک فریق نسبتی ماؤس موڈ کی حمایت نہیں کرتا۔"),
("rel-mouse-not-ready-tip", "نسبتی ماؤس موڈ ابھی تیار نہیں۔ براہِ کرم دوبارہ کوشش کریں۔"),
("rel-mouse-lock-failed-tip", "کرسر مقفل کرنے میں ناکامی۔ نسبتی ماؤس موڈ بند کر دیا گیا ہے۔"),
("rel-mouse-exit-{}-tip", "باہر نکلنے کے لیے {} دبائیں۔"),
("rel-mouse-permission-lost-tip", "کی بورڈ کی اجازت واپس لے لی گئی۔ نسبتی ماؤس موڈ بند کر دیا گیا ہے۔"),
("Changelog", "تبدیلی کا لاگ"),
("keep-awake-during-outgoing-sessions-label", ""),
("keep-awake-during-incoming-sessions-label", ""),
("keep-awake-during-outgoing-sessions-label", "بیرونی سیشنز کے دوران اسکرین بیدار رکھیں"),
("keep-awake-during-incoming-sessions-label", "آنے والے سیشنز کے دوران اسکرین بیدار رکھیں"),
("Continue with {}", "continue-with-{}"),
("Display Name", "display-name"),
("password-hidden-tip", ""),
("preset-password-in-use-tip", ""),
("password-hidden-tip", "مستقل پاس ورڈ مقرر ہے (پوشیدہ)۔"),
("preset-password-in-use-tip", "پہلے سے مقرر پاس ورڈ اس وقت استعمال میں ہے۔"),
("terminal-clipboard-write-tip", "ٹرمنل میں ایک ایپ اس ڈیوائس کے کلپ بورڈ پر متن کاپی کرنا چاہتی ہے۔ اجازت دینے پر یہ اجازت تمام کنکشن کی ٹرمنل ایپس پر لاگو رہے گی جب تک آپ اسے ترتیبات میں بند نہ کر دیں۔ دستی کاپی اور پیسٹ متاثر نہیں ہوں گے۔"),
("Allow terminal apps to copy to clipboard", "ٹرمنل ایپس کو کلپ بورڈ پر کاپی کرنے کی اجازت دیں"),
("Export", "برآمد کریں"),
("Export Logs", "لاگز برآمد کریں"),
("Import Folder", "فولڈر درآمد کریں"),
("Enable privacy mode", "پرائیویسی موڈ فعال کریں"),
("allow-remote-toolbar-docking-any-edge", "ریموٹ ٹول بار کو ونڈو کے کسی بھی کنارے پر لگانے کی اجازت دیں"),
("API Token", "API ٹوکن"),
("Deploy", "تعینات کریں"),
("Custom ID (optional)", "حسبِ ضرورت ID (اختیاری)"),
("server_requires_deployment_tip", "سرور کا تقاضا ہے کہ یہ آلہ واضح طور پر تعینات کیا جائے۔ ابھی تعینات کریں؟"),
("The server does not require explicit deployment.", "سرور کو واضح تعیناتی کی ضرورت نہیں۔"),
("Unknown response.", "نامعلوم جواب۔"),
("wayland-keyboard-input-disabled-tip", "کی بورڈ ان پٹ کی اجازت دیں؟"),
("wayland-keyboard-input-consent-tip", "اس دور دراز کمپیوٹر پر آپ جو کچھ ٹائپ کریں گے (بشمول پاس ورڈ) اسے اس پر موجود دوسری ایپس پڑھ سکتی ہیں۔"),
("wayland-keyboard-input-applies-to-tip", "یہ انتخاب اس پر لاگو ہوتا ہے:"),
("wayland-soft-keyboard-input-label", "سافٹ کی بورڈ ان پٹ"),
("wayland-keyboard-input-reset-choice-tip", "کی بورڈ ان پٹ کا انتخاب دوبارہ ترتیب دیں"),
("remember-wayland-keyboard-choice-tip", "اس دور دراز کمپیوٹر کے لیے دوبارہ نہ پوچھیں"),
("Why this happens", "ایسا کیوں ہوتا ہے"),
("Switch display", "ڈسپلے تبدیل کریں"),
("Show monitor switch button on the main toolbar", "مرکزی ٹول بار پر مانیٹر تبدیل کرنے کا بٹن دکھائیں"),
("Show on the minimized toolbar", "چھوٹے کیے گئے ٹول بار پر دکھائیں"),
("All monitors", "تمام مانیٹر"),
("#{} monitor", "#{} مانیٹر"),
("conn-e2ee-unavailable-tip", "اینڈ ٹو اینڈ خفیہ کاری کی تصدیق نہیں ہو سکی۔\nدور دراز آلہ ابھی ترتیب دیا جا رہا ہو سکتا ہے۔ بعد میں دوبارہ کوشش کریں۔\nاگر ایسا بار بار ہو تو ممکن ہے سرور قابلِ اعتماد نہ ہو۔\nپھر بھی جاری رکھیں؟"),
("ID whitelisting", "ID وائٹ لسٹنگ"),
("Use ID whitelisting", "ID وائٹ لسٹنگ استعمال کریں"),
("id_whitelist_tip", "صرف وائٹ لسٹ میں شامل IDs مجھ تک رسائی حاصل کر سکتی ہیں"),
("id_whitelist_wildcard_tip", "وائلڈ کارڈ معاون ہیں: '*' کسی بھی تعداد میں حروف سے مطابقت رکھتا ہے، '?' بالکل ایک حرف سے"),
("Invalid ID", "غلط ID"),
("Your ID is blocked by the peer", "آپ کی ID دوسرے فریق نے مسدود کر دی ہے"),
("Your ip is blocked by the peer", "آپ کا IP دوسرے فریق نے مسدود کر دیا ہے"),
("id_whitelist_caveat_tip", "ID کی اطلاع منسلک ہونے والا کلائنٹ خود دیتا ہے۔ یہ وائٹ لسٹ خطرے کو کم کرتی ہے، پاس ورڈ یا 2FA کا متبادل نہیں۔"),
("whitelist_cidr_tip", "CIDR اشاریہ معاون ہے، مثلاً 192.168.1.0/24"),
("Continue", "جاری رکھیں"),
("Browser didn't open? Use the url below to sign in.", "براؤزر نہیں کھلا؟ سائن اِن کرنے کے لیے نیچے دیا گیا URL استعمال کریں۔"),
("Lock canvas", "کینوس مقفل کریں"),
("Sync clipboard between sessions", "سیشنز کے درمیان کلپ بورڈ ہم آہنگ کریں"),
("sync-clipboard-between-sessions-tip", "ایک ریموٹ سیشن میں کاپی کیا گیا متن یا تصاویر آپ کے دیگر منسلک سیشنز کے کلپ بورڈ پر بھی بھیجی جاتی ہیں۔"),
("Reuse one connection for port forwarding", "پورٹ فارورڈنگ کے لیے ایک ہی کنکشن دوبارہ استعمال کریں"),
("port-forward-mux-tip", "ایک پورٹ فارورڈنگ کے تمام کنکشن دوسرے کمپیوٹر کے ساتھ بنے ایک ہی کنکشن سے گزرتے ہیں، ہر ایک کے لیے دوبارہ منسلک ہو کر لاگ اِن کرنے کے بجائے۔"),
].iter().cloned().collect();
}

View File

@@ -659,9 +659,9 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("screenshot-merged-screen-not-supported-tip", "Không hỗ trợ chụp gộp nhiều màn hình."),
("screenshot-action-tip", "Hành động chụp màn hình"),
("Save as", "Lưu thành"),
("Export", ""),
("Export Logs", ""),
("Import Folder", ""),
("Export", "Xuất"),
("Export Logs", "Xuất nhật ký"),
("Import Folder", "Nhập thư mục"),
("Copy to clipboard", "Sao chép vào Clipboard"),
("Enable remote printer", "Bật máy in từ xa"),
("Downloading {}", "Đang tải xuống {}"),
@@ -763,7 +763,10 @@ pub static ref T: std::collections::HashMap<&'static str, &'static str> =
("Lock canvas", "Khóa khung hình"),
("Sync clipboard between sessions", "Đồng bộ clipboard giữa các phiên"),
("sync-clipboard-between-sessions-tip", "Văn bản hoặc hình ảnh được sao chép trong một phiên từ xa cũng được gửi đến clipboard của các phiên đã kết nối khác."),
("Enable WebRTC P2P connection", "Cho phép kết nối WebRTC P2P"),
("Enable TCP hole punching", "Bật TCP Hole Punching"),
("terminal-clipboard-write-tip", ""),
("Allow terminal apps to copy to clipboard", ""),
("Enable", "Bật"),
("Reuse one connection for port forwarding", "Dùng chung một kết nối cho chuyển tiếp cổng"),
("port-forward-mux-tip", "Chuyển toàn bộ kết nối của một quy tắc chuyển tiếp cổng qua một kết nối duy nhất tới máy đối phương, thay vì kết nối và đăng nhập lại cho từng kết nối."),
].iter().cloned().collect();
}

View File

@@ -45,6 +45,7 @@ mod custom_server;
mod lang;
#[cfg(not(any(target_os = "android", target_os = "ios")))]
mod port_forward;
mod port_forward_mux;
#[cfg(not(any(target_os = "android", target_os = "ios")))]
mod tray;

View File

@@ -1,404 +0,0 @@
/*
* getifaddrs()/freeifaddrs() for Android: bionic only exports them from API 24,
* while the jniLibs are built against the API 21 sysroot (flutter/ndk_*.sh) and
* webrtc-util calls them whenever WebRTC gathers ICE candidates.
*
* Only AF_INET and AF_INET6 entries are reported; the AF_PACKET ones the real
* getifaddrs() also returns have no reader in this build.
*/
#include <errno.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <ifaddrs.h>
#include <net/if.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <linux/netlink.h>
#include <linux/rtnetlink.h>
/* Refuse a single netlink datagram larger than this rather than grow forever. */
#define RD_NL_MAX_BUF (1024 * 1024)
/* A dump that never terminates must not hang the caller. */
#define RD_NL_MAX_DATAGRAMS 4096
typedef int (*rd_nl_cb)(struct nlmsghdr *nlh, void *ctx);
struct rd_link_info {
unsigned int index;
unsigned int flags;
char name[IFNAMSIZ + 1];
};
struct rd_link_table {
struct rd_link_info *items;
size_t len;
size_t cap;
};
/* One allocation per reported address; `ifa` first so freeifaddrs() can free
* the node it is handed. */
struct rd_ifaddrs_storage {
struct ifaddrs ifa;
struct sockaddr_storage addr;
struct sockaddr_storage netmask;
struct sockaddr_storage ifu;
char name[IFNAMSIZ + 1];
};
struct rd_addr_ctx {
const struct rd_link_table *links;
struct ifaddrs *head;
struct ifaddrs *tail;
};
static void rd_parse_rtattr(struct rtattr *rta, int len, struct rtattr **tb, int max)
{
memset(tb, 0, sizeof(*tb) * ((size_t)max + 1));
for (; RTA_OK(rta, len); rta = RTA_NEXT(rta, len)) {
if (rta->rta_type <= (unsigned short)max && tb[rta->rta_type] == NULL)
tb[rta->rta_type] = rta;
}
}
/* `len` must stay signed: NLMSG_NEXT subtracts the *aligned* length, which
* overshoots on an unaligned trailing message, and only a negative remainder
* stops NLMSG_OK from reading past the buffer. */
static int rd_nl_parse(char *buf, int len, unsigned short reply_type, unsigned int seq,
rd_nl_cb cb, void *ctx, int *done)
{
struct nlmsghdr *nlh = (struct nlmsghdr *)buf;
for (; NLMSG_OK(nlh, len); nlh = NLMSG_NEXT(nlh, len)) {
if (nlh->nlmsg_seq != seq)
continue;
if (nlh->nlmsg_type == NLMSG_DONE) {
*done = 1;
return 0;
}
if (nlh->nlmsg_type == NLMSG_ERROR) {
struct nlmsgerr *err = (struct nlmsgerr *)NLMSG_DATA(nlh);
if (nlh->nlmsg_len >= NLMSG_LENGTH(sizeof(*err)) && err->error != 0)
errno = -err->error;
else
errno = EIO;
return -1;
}
if (nlh->nlmsg_type != reply_type)
continue;
if (cb(nlh, ctx) != 0)
return -1;
/* A non-multipart reply is the whole answer; nothing follows it. */
if ((nlh->nlmsg_flags & NLM_F_MULTI) == 0) {
*done = 1;
return 0;
}
}
return 0;
}
static int rd_nl_dump(int fd, unsigned short request_type, unsigned short reply_type,
unsigned int seq, rd_nl_cb cb, void *ctx)
{
struct {
struct nlmsghdr nlh;
struct rtgenmsg gen;
} req;
struct sockaddr_nl kernel;
char *buf;
size_t cap = 8192;
int datagrams = 0;
int done = 0;
int rc = -1;
int saved;
memset(&req, 0, sizeof(req));
req.nlh.nlmsg_len = NLMSG_LENGTH(sizeof(req.gen));
req.nlh.nlmsg_type = request_type;
req.nlh.nlmsg_flags = NLM_F_REQUEST | NLM_F_DUMP;
req.nlh.nlmsg_seq = seq;
req.gen.rtgen_family = AF_UNSPEC;
memset(&kernel, 0, sizeof(kernel));
kernel.nl_family = AF_NETLINK;
for (;;) {
if (sendto(fd, &req, req.nlh.nlmsg_len, 0, (struct sockaddr *)&kernel,
sizeof(kernel)) >= 0)
break;
if (errno != EINTR)
return -1;
}
buf = (char *)malloc(cap);
if (buf == NULL) {
errno = ENOMEM;
return -1;
}
while (!done) {
/* MSG_PEEK|MSG_TRUNC reports the datagram's real size, so an
* undersized buffer costs a resize instead of a silent truncation. */
ssize_t n = recv(fd, buf, cap, MSG_PEEK | MSG_TRUNC);
if (n < 0) {
if (errno == EINTR)
continue;
goto out;
}
if ((size_t)n > cap) {
char *grown;
if ((size_t)n > RD_NL_MAX_BUF) {
errno = EMSGSIZE;
goto out;
}
grown = (char *)realloc(buf, (size_t)n);
if (grown == NULL) {
errno = ENOMEM;
goto out;
}
buf = grown;
cap = (size_t)n;
continue;
}
n = recv(fd, buf, cap, 0);
if (n < 0) {
if (errno == EINTR)
continue;
goto out;
}
if (n == 0 || ++datagrams > RD_NL_MAX_DATAGRAMS) {
errno = EIO;
goto out;
}
if (rd_nl_parse(buf, (int)n, reply_type, seq, cb, ctx, &done) != 0)
goto out;
}
rc = 0;
out:
saved = errno;
free(buf);
errno = saved;
return rc;
}
static int rd_link_cb(struct nlmsghdr *nlh, void *ctx)
{
struct rd_link_table *t = (struct rd_link_table *)ctx;
struct ifinfomsg *ifi;
struct rtattr *tb[IFLA_IFNAME + 1];
struct rd_link_info *slot;
int payload;
int namelen;
if (nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*ifi)))
return 0;
ifi = (struct ifinfomsg *)NLMSG_DATA(nlh);
payload = (int)nlh->nlmsg_len - (int)NLMSG_SPACE(sizeof(*ifi));
if (payload < 0)
payload = 0;
rd_parse_rtattr(IFLA_RTA(ifi), payload, tb, IFLA_IFNAME);
/* An interface we cannot name is of no use: callers dereference ifa_name. */
if (tb[IFLA_IFNAME] == NULL || (int)RTA_PAYLOAD(tb[IFLA_IFNAME]) <= 0)
return 0;
if (t->len == t->cap) {
size_t ncap = t->cap ? t->cap * 2 : 16;
struct rd_link_info *items =
(struct rd_link_info *)realloc(t->items, ncap * sizeof(*items));
if (items == NULL) {
errno = ENOMEM;
return -1;
}
t->items = items;
t->cap = ncap;
}
slot = &t->items[t->len];
memset(slot, 0, sizeof(*slot));
slot->index = (unsigned int)ifi->ifi_index;
slot->flags = ifi->ifi_flags;
namelen = (int)RTA_PAYLOAD(tb[IFLA_IFNAME]);
if (namelen > IFNAMSIZ)
namelen = IFNAMSIZ;
memcpy(slot->name, RTA_DATA(tb[IFLA_IFNAME]), (size_t)namelen);
slot->name[namelen] = '\0';
t->len++;
return 0;
}
static const struct rd_link_info *rd_link_find(const struct rd_link_table *t,
unsigned int index)
{
size_t i;
for (i = 0; i < t->len; i++) {
if (t->items[i].index == index)
return &t->items[i];
}
return NULL;
}
static void rd_fill_mask(unsigned char *out, int len, unsigned int prefix)
{
int i;
if (prefix > (unsigned int)len * 8)
prefix = (unsigned int)len * 8;
for (i = 0; i < len; i++) {
if (prefix >= 8) {
out[i] = 0xff;
prefix -= 8;
} else if (prefix > 0) {
out[i] = (unsigned char)(0xff << (8 - prefix));
prefix = 0;
} else {
out[i] = 0;
}
}
}
static void rd_set_in(struct sockaddr_storage *ss, const void *addr)
{
struct sockaddr_in *sin = (struct sockaddr_in *)ss;
sin->sin_family = AF_INET;
memcpy(&sin->sin_addr, addr, 4);
}
static int rd_addr_cb(struct nlmsghdr *nlh, void *ctx)
{
struct rd_addr_ctx *c = (struct rd_addr_ctx *)ctx;
struct ifaddrmsg *ifa;
struct rtattr *tb[IFA_BROADCAST + 1];
struct rtattr *ra;
const struct rd_link_info *link;
struct rd_ifaddrs_storage *st;
int payload;
if (nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*ifa)))
return 0;
ifa = (struct ifaddrmsg *)NLMSG_DATA(nlh);
if (ifa->ifa_family != AF_INET && ifa->ifa_family != AF_INET6)
return 0;
/* Without the link entry there is no name, and callers deref ifa_name. */
link = rd_link_find(c->links, ifa->ifa_index);
if (link == NULL)
return 0;
payload = (int)nlh->nlmsg_len - (int)NLMSG_SPACE(sizeof(*ifa));
if (payload < 0)
payload = 0;
rd_parse_rtattr(IFA_RTA(ifa), payload, tb, IFA_BROADCAST);
/* On a point-to-point link IFA_ADDRESS holds the peer and IFA_LOCAL the
* local address; ipv6 only ever sets IFA_ADDRESS. */
if (ifa->ifa_family == AF_INET)
ra = tb[IFA_LOCAL] ? tb[IFA_LOCAL] : tb[IFA_ADDRESS];
else
ra = tb[IFA_ADDRESS] ? tb[IFA_ADDRESS] : tb[IFA_LOCAL];
if (ra == NULL)
return 0;
if ((int)RTA_PAYLOAD(ra) < (ifa->ifa_family == AF_INET ? 4 : 16))
return 0;
st = (struct rd_ifaddrs_storage *)calloc(1, sizeof(*st));
if (st == NULL) {
errno = ENOMEM;
return -1;
}
memcpy(st->name, link->name, sizeof(st->name));
st->ifa.ifa_name = st->name;
st->ifa.ifa_flags = link->flags;
st->ifa.ifa_addr = (struct sockaddr *)&st->addr;
st->ifa.ifa_netmask = (struct sockaddr *)&st->netmask;
if (ifa->ifa_family == AF_INET) {
struct sockaddr_in *mask = (struct sockaddr_in *)&st->netmask;
rd_set_in(&st->addr, RTA_DATA(ra));
mask->sin_family = AF_INET;
rd_fill_mask((unsigned char *)&mask->sin_addr, 4, ifa->ifa_prefixlen);
if ((link->flags & IFF_POINTOPOINT) && tb[IFA_ADDRESS] && tb[IFA_LOCAL] &&
(int)RTA_PAYLOAD(tb[IFA_ADDRESS]) >= 4 &&
memcmp(RTA_DATA(tb[IFA_ADDRESS]), RTA_DATA(tb[IFA_LOCAL]), 4) != 0) {
rd_set_in(&st->ifu, RTA_DATA(tb[IFA_ADDRESS]));
st->ifa.ifa_dstaddr = (struct sockaddr *)&st->ifu;
} else if (tb[IFA_BROADCAST] && (int)RTA_PAYLOAD(tb[IFA_BROADCAST]) >= 4) {
rd_set_in(&st->ifu, RTA_DATA(tb[IFA_BROADCAST]));
st->ifa.ifa_broadaddr = (struct sockaddr *)&st->ifu;
}
} else {
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&st->addr;
struct sockaddr_in6 *mask = (struct sockaddr_in6 *)&st->netmask;
sin6->sin6_family = AF_INET6;
memcpy(&sin6->sin6_addr, RTA_DATA(ra), 16);
/* A link-local address is not routable without its scope id. */
if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr) ||
IN6_IS_ADDR_MC_LINKLOCAL(&sin6->sin6_addr))
sin6->sin6_scope_id = ifa->ifa_index;
mask->sin6_family = AF_INET6;
rd_fill_mask((unsigned char *)&mask->sin6_addr, 16, ifa->ifa_prefixlen);
}
if (c->tail != NULL)
c->tail->ifa_next = &st->ifa;
else
c->head = &st->ifa;
c->tail = &st->ifa;
return 0;
}
void freeifaddrs(struct ifaddrs *ifa)
{
while (ifa != NULL) {
struct ifaddrs *next = ifa->ifa_next;
free(ifa);
ifa = next;
}
}
int getifaddrs(struct ifaddrs **ifap)
{
struct rd_link_table links;
struct rd_addr_ctx ctx;
int fd;
int saved;
if (ifap == NULL) {
errno = EINVAL;
return -1;
}
*ifap = NULL;
memset(&links, 0, sizeof(links));
memset(&ctx, 0, sizeof(ctx));
ctx.links = &links;
fd = socket(AF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, NETLINK_ROUTE);
if (fd < 0)
return -1;
if (rd_nl_dump(fd, RTM_GETLINK, RTM_NEWLINK, 1, rd_link_cb, &links) != 0)
goto fail;
if (rd_nl_dump(fd, RTM_GETADDR, RTM_NEWADDR, 2, rd_addr_cb, &ctx) != 0)
goto fail;
close(fd);
free(links.items);
*ifap = ctx.head;
return 0;
fail:
saved = errno;
close(fd);
free(links.items);
freeifaddrs(ctx.head);
errno = saved;
return -1;
}

View File

@@ -1496,8 +1496,8 @@ pub fn rename_exe_cmd(src_exe: &str, path: &str) -> ResultType<String> {
.ok_or(anyhow!("Can't get file name of {src_exe}"))?
.to_string_lossy()
.to_string();
let app_name = crate::get_app_name().to_lowercase();
if src_exe_filename.to_lowercase() == format!("{app_name}.exe") {
let app_name = crate::get_app_name();
if src_exe_filename == format!("{app_name}.exe") {
Ok("".to_owned())
} else {
Ok(format!(

Some files were not shown because too many files have changed in this diff Show More