WebSocket support folds into force_relay because a ws tunnel kills
classic TCP/UDP punching — but that conflated transport necessity with
relay policy, and the WebRTC decisions keyed off the merged flag: a ws
client built no offerer at all without TURN, and only a Relay-only-ICE
one with it. ws deployments could never reach a direct WebRTC
connection, which is exactly the path they are supposed to live on.
Split the flag. LoginConfigHandler now tracks policy_relay (the
force-always-relay option, an explicit relay request — /r ids and
retry-via-relay included — and proxy) separately; force_relay stays
policy_relay || use_ws() and keeps governing the classic paths, so
non-ws behavior is unchanged everywhere:
- the offerer's existence and ICE policy follow policy_relay: under
pure ws the offer gathers every candidate type and may go direct;
under relay-by-policy it stays Relay-only ICE, TURN-gated, exactly
as before;
- the RelayResponse race applies the prefer-P2P window under ws (a
direct ICE path is worth delaying an already-ready relay for) while
policy relay keeps first-success semantics;
- the request carries webrtc_all_ice (hbb_common 64b54ab) so the
controlled side knows the offer is full-ICE: it answers with full ICE
and no TURN requirement, while offers without the bit keep today's
relay-only answer path on every version-skew combination.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
Picks up the handshake-recovery work plus the review round on top of it:
ABBA deadlock between the endpoint's two DashMaps, graceful-close tail
truncation, mid-stream hole on ikcp_send failure, FIN retransmission for
lost-FIN half-open hangs, SYN-ACK budget burned on dropped packets,
spurious ConnectTimeout after a completed handshake, accept-backlog
overflow stranding conns, aliasing UB in the output callback, and the
log-facade/throttling cleanup (per-packet sites no longer reach the
debug-level file logger, peer-rate warns throttled).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
9ea5442..cdcfd8d. `requester_id = 11` never reached main or hbbs, so nothing has
written or read that tag and reserving it guarded a wire format that never
existed — inconsistent with this branch retyping IceCandidate's tag 2 in place.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
b7f79c6..9ea5442 — reject a fragment header that is neither FRAG_END nor
FRAG_MORE, and a FRAG_MORE carrying no payload. The latter is the one nothing
downstream caught: it adds nothing to the reassembly accumulator, so the
MAX_FRAME_LENGTH cap never trips and WebRTCStream::next() spins for as long as
the peer keeps writing, with no error and no teardown.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The send and recv arms shared one counter, and an ICMP error on a connected
socket is reported once and then cleared — so the steady state is an
alternation: the send succeeds and clears the counter, the next recv reports
the error and finds the counter at 1, and logs. Every error still wrote a
line, at the ~100/s the previous commit set out to stop, while the
persistent-failure and recovery branches were unreachable.
Use one LogThrottle per direction instead of a hand-rolled counter. That
removes the shared state the bug lived in, drops a third throttling mechanism
in favour of the one already added, and leaves the surrounding `if let Err`
untouched rather than reshaping it into a match.
Also fix test_udp_uat's socket-error arm, the untreated twin of the punch_udp
site: it had no backoff at all, so a persistent error re-armed recv
immediately and spun the loop at CPU speed, one warn line per iteration.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
Debug output goes to the log file, so a site that fires per received message
or per retry lets someone else decide how much a machine writes to disk. The
WebRTC work added the first such sites.
- KCP io loop: absorbing ICMP errors as packet loss made a broken socket write
~100 lines a second for the 60s until the pong timeout reaps it. Log by run
instead: one line when a run starts, one per ~5s while it persists so a stuck
socket stays visible, and one on recovery with the total.
- punch_udp: the recv error retries every 10ms for up to MAX_TIME, so one line
per occurrence wrote thousands per punch. Log the first, report the count in
the timeout message.
- ICE candidate paths (client, mediator): the peer sets the candidate rate and
the rendezvous route carrying them needs no prior punch, so throttle to one
line a minute each with the suppressed count.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
Candidates arrive in gathering order — host, then srflx, then relay — so a
full buffer was discarding exactly the ones that traverse NAT while keeping
host ones that only work on a shared LAN. Evict from the front instead.
Also document why the controller's ICE bridge must not reconnect on error, in
contrast to the controlled side's per-candidate retry: its socket address is
the return route itself (mangled into PunchHole.socket_addr, echoed back in
IceCandidate.socket_addr, resolved through tcp_punch), so a reconnect would
arrive from an address no route points at, and the server drops the old entry
when the connection closes. Once it dies both directions are dead, and
abandoning WebRTC is the correct response rather than retrying.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
race_transports_prefer_webrtc committed any success from its first argument
outright, on the assumption that it is the WebRTC connect. It is not: the call
site passes a whole punch attempt, which internally falls back to request_relay
when its direct transports fail. That relay was therefore committed instantly
while the offer-less fallback's TCP punch was still in flight — inverting the
preference this function exists to enforce, since the is_p2p predicate the
caller already supplies was applied only to the `others` branch.
Apply it to both branches: a direct result from either side still commits
immediately, and a relayed result from either side is held for the window so
the other side can land something direct. Also commit a held connection when
the surviving branch errors, which the previous code only did on the first
branch's failure path.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
The rebase onto master (switch-code feature) added an 8th request_relay
parameter; pass the interface's switch code from both WebRTC->relay
fallback paths so a role-swap session survives the fallback. Also drop
a duplicate bindgen 0.72.1 entry the Cargo.lock merge produced.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
- treat ICMP-driven UDP socket errors (WSAECONNRESET 10054 on Windows,
ECONNREFUSED on Linux) as packet loss in punch_udp and the KCP pump
instead of tearing the session down; KCP retransmits through them and a
truly dead link is still reaped by the pong/app-level timeouts
- resolve STUN hostnames via tokio::net::lookup_host so DNS never blocks a
runtime worker; fix the inverted non-IPv4 error message
- add enable-kcp-congestion-control option (default on): switch the turbo
profile to nc=0 so brief loss on constrained links no longer spirals into
stalls; sender-side only, no wire negotiation
- pin kcp-sys to the rustdesk-patches branch: upstream main lost the
RustDesk patches on the EasyTier sync, and this branch also wires
set_kcp_config_factory into connection setup, making the option effective
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- the WebRTC offer now rides any punch request; only an offer-less request
may close and reuse the rendezvous socket for TCP punching
(request_allows_tcp_punch replaces the udp_port-based invariant), with a
separate offer-less request racing as the TCP fallback
- WebSocket mode no longer disables WebRTC — ws only tunnels the
signaling/relay legs while ICE stays the only P2P path there; SOCKS proxy
still disables it (ICE would bypass the proxy and leak the real IP)
- controlled side: WebRTC-only punch replies and trickled ICE candidates go
over dedicated TCP connections to the rendezvous server instead of the UDP
mediator channel, for ws/TCP-only hbbs deployments; drop the now-redundant
rz_sender plumbing and the 400ms candidate re-send on that leg
- guard is_udp handling against responses to requests that advertised no
udp_port; skip the IPv6 socket bind under force-relay
- test_udp_uat: drop the STUN port race — the punch port must come from the
rendezvous server's TestNatResponse observing this socket's mapping, a
STUN probe from another socket can advertise an unreachable port
- bump hbb_common (webrtc 0.13 MSRV pin rationale + upgrade checklist docs)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- prefer-P2P racing (race_transports_prefer_webrtc) across punch and RelayResponse; ICE bridge with 400ms candidate resend
- controlled-side answerer and ICE routing; sign local DTLS fingerprint into SignedId, controller verifies the binding fail-closed
- fix pc leaks: close_webrtc() on insecure-decline paths (io_loop, port_forward); compute direct before disarming the offerer guard
- point hbb_common to the WebRTC data-plane commit 9f5a296
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Add Urdu language support for UI strings till 329 line
Co-authored-by: Copilot <copilot@github.com>
* Add Urdu translations for additional UI strings
* Add Urdu language support in lang.rs
* Fix Urdu translations and remove unused keys in ur.rs
---------
Co-authored-by: Copilot <copilot@github.com>
* fix(msi): keep only native ProductCode uninstall entry
Move installer state outside the Uninstall registry path,
clean up legacy duplicate entries, and use the MSI ProductCode
for updates and uninstalling.
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(msi): harden update and uninstall handling
- handle legacy EXE updates without an MSI ProductCode
- propagate MsiExec uninstall failures
- validate and XML-quote custom ARP values
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(msi): validate registry state before update and uninstall
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(msi): pass WindowsInstaller state to elevated sequence
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(msi): block unsupported MSI-to-EXE upgrades
- resolve native MSI state and ProductCode safely
- suppress reboot while preserving MSI uninstall results
- publish the resolved ARP install location
- skip invalid unrelated MSI uninstall entries
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(msi): fail uninstall when ProductCode is missing
Prevent known MSI installations from falling back to
EXE cleanup when the ProductCode cannot be resolved.
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(msi): do not abort update on ARP version write failure
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
AppRun sets XDG_DATA_DIRS to
"$APPDIR/usr/local/share:$APPDIR/usr/share:$XDG_DATA_DIRS". When the host
leaves XDG_DATA_DIRS unset, the result contains no /usr/share, and setting
the variable at all suppresses the XDG default of /usr/local/share:/usr/share.
gdk-pixbuf 2.43+ (Arch, CachyOS, Gentoo, Fedora, openSUSE) no longer ships PNG,
JPEG or WebP as loader modules; libgdk_pixbuf links libglycin and decodes them
through it, and glycin discovers its loaders in
$XDG_DATA_DIRS/glycin-loaders/<ver>/conf.d/*.conf. With /usr/share missing,
glycin finds none and every PNG decode inside the AppImage fails with
"Unrecognized image file format".
RustDesk sends remote cursors to flutter_custom_cursor as PNG, and that plugin
returns nullptr from a std::string function when the decode fails, so the first
non-default cursor of a session aborts the process:
GdkPixbuf-CRITICAL **: gdk_pixbuf_copy: assertion 'GDK_IS_PIXBUF (pixbuf)' failed
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_M_construct null not valid
Debian and Ubuntu compile PNG straight into libgdk_pixbuf and never reach
glycin, which is why this only affects non-Debian hosts.
Append the two XDG defaults so they are present when the host does not provide
them. They go last, so a session that sets XDG_DATA_DIRS properly keeps its own
precedence, and appending is a no-op where those paths are already listed.
Verified on CachyOS (gdk-pixbuf 2.44.7) against a stock 1.4.9 AppImage: with
only this variable changed, a full remote session runs without crashing and
renders remote cursors correctly.
Refs #4565#5457#7013#9164#10563#11499#12257#14305#14405#15625
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* Prefer active X11 session display
* Update linux.rs
* fix(linux): keep the logind display only when it is a local one
`get_display_from_session` returns the value pam_systemd was handed at session
creation, and logind never updates it afterwards. That value is not always a
usable local display: it can be qualified with this host (`myhost:0`), name an
X forwarding endpoint (`localhost:10.0`), or be a bare `:`.
Taking it unconditionally is worse than taking nothing, because a non-empty
`self.display` suppresses every fallback below it, `get_display_by_user` and the
`:0` default alike. The stripping at the end of `get_display_x11` does not save
the last two cases either: it leaves `:` as is and turns `localhost:10.0` into a
local looking `:10.0`, either of which is then exported as DISPLAY and leaves the
session unreachable, where before this PR the host got a working `:0`.
Strip this host so `myhost:0` is still accepted as `:0`, leave `localhost` in
place, and require a display number after the colon. Anything else falls through
to the existing chain.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TKJxvTT6NQDEcnkWBx5bLA
* docs(agents): prefer a little duplication over a restructure
The "Be minimally invasive" rules already ask for purely additive diffs, but not
in the case where the addition would otherwise reshape an existing function so
the two can share code. Repeating a few lines is the better diff there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TKJxvTT6NQDEcnkWBx5bLA
---------
Co-authored-by: RustDesk <71636191+rustdesk@users.noreply.github.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(windows): restore keyboard focus when the cursor re-enters the remote image
On Windows the raw key focus node is unfocused on window blur and nothing
requests it back, so returning to an already connected session left the
keyboard dead until the remote image was clicked.
Request focus from enterView(), gated on the window being active, the tab
being selected and no blocking overlay, so a background window cannot grab
system keys. enterOrLeave(true) is still driven by RawKeyFocusScope's
onFocusChange, so it is not called twice.
* fix(windows): refocus on window focus when the cursor already hovers the image
Alt+Tab or a taskbar click returns focus without a PointerEnter, so
enterView() cannot restore the keyboard. Reuse _cursorOverImage, gated
on the selected tab and no blocking overlay.
* refactor(windows): share one focus predicate for every requestFocus path
The relative-mouse-mode restore on window focus could hand remote input
to this page while a blocking dialog was up or the tab was not selected.
* fix(flutter): make Adjust Window reliable across desktop platforms
- Fix incorrect sizing on scaled displays by calculating the target from the
rendered canvas scale and platform-specific window coordinate units.
- Fix adjustments using the wrong monitor by querying the current remote
window's screen, with the main window as fallback.
- Fix stale geometry after fullscreen or maximized transitions by refreshing
metrics before calculating and applying the target frame.
- Fix fullscreen availability checks on Windows and macOS by predicting the
restored window borders and caching each macOS window's pre-fullscreen work area.
- Fix incorrect Linux work areas by handling GNOME Wayland fractional scaling
and caching compositor/X11 work-area measurements when visibleFrame is wrong.
- Prevent unsafe adjustments by rejecting invalid, oversized, or implausibly
small target frames.
- Avoid failures during window teardown by skipping adjustment when the view,
screen, or native window frame is unavailable.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): harden Adjust Window handling
- Use the dynamic Linux resize edge when predicting restored window bounds.
- Treat GNOME fractional-scaling lookup failures as unknown without repeating
the lookup for the remote window.
- Stop adjustment safely when native window calls fail during window teardown.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): correct Linux monitor selection
Update window_size to use monitor height for vertical bounds, preventing incorrect screen selection with vertically stacked displays.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* docs(flutter): simplify Linux screen handling comments
Keep the source rationale concise and move platform measurements and investigation details out of the implementation.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): align Adjust Window resize padding
Use the shared drag-to-resize padding for Linux restored-window predictions so menu validation matches the applied frame dimensions.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): remove Adjust Window screen fallback
Return null when the current window screen is unavailable instead of using the main window's scale factor and work area.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(linux): query Mutter monitor layout mode
Use DisplayConfig.GetCurrentState instead of inferring scaling from
experimental features, and handle Ubuntu's UI-scaled logical mode.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): use native maximized state for Wayland cache
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): allow Adjust Window to fill work area
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): avoid racing screen info updates
Signed-off-by: 21pages <sunboeasy@gmail.com>
* refactor(flutter): remove dead Adjust Window web plumbing
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): tolerate near-unity Wayland scale factors
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): harden window screen detection
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(linux): drop deprecated GNOME session detection
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): remove GNOME monitor layout mode flutter cache
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
The CursorData constructor copies hotxOrigin into hoty. Latent today:
both consumers call updateGetKey() before reading, and _checkUpdateScale
recomputes hoty from hotyOrigin - but any future read before that call
inherits the x value silently.
* fix: hide the printer settings tab when settings are disabled
The Security and Network tabs already honour `disable-settings`, but the
Printer tab was gated only on `hide-remote-printer-settings`, so custom
clients built with settings disabled still exposed it.
https://github.com/rustdesk/rustdesk-server-pro/issues/1001
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* feat: add hide-general-settings builtin option
Hides the General tab of the settings page. Unlike the other
hide-*-settings options this one is still useful when settings are
disabled, since `disable-settings` does not cover the General tab.
https://github.com/rustdesk/rustdesk-server-pro/issues/1001
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(wayland): back off the polling display lookups after a failure (drm)
In drm builds an enumeration that fails with no endpoint named in the
environment falls back to the socket probe, which forks a child bounded by
seconds, and the display service asks again every 300 ms -- at a greeter
with no reachable compositor that is a probe child per turn, forever. Such
a failure now stamps a shared 5 s backoff, and only the polling callers
honor it: the 300 ms displays-changed check skips its turn and the 1.5 s
live layout poll returns no answer for that turn.
Only the failure that would fork stamps. A session server is spawned with
WAYLAND_DISPLAY set, so its failed connect bails in-process before any
fork; stamping there would buy nothing and cost recovery latency, so live
sessions keep master's behavior exactly. The stamp also survives
clear_wayland_displays_cache: it describes the seat, not the cache, and
the ~1/s capturer rebuild loop clears on every teardown -- dropping the
stamp with the cache would let that loop defeat the backoff and would
turn every post-hotplug failure into a "first" one forever.
The displays-changed check weighs the backoff against what is already
published. With nothing synced yet it always populates -- an unaugmented
DRM list beats the empty broadcast the send path would otherwise emit.
With a synced layout, a suppressed turn keeps it, and a fresh first
failure keeps it too; only a failure that persists across a backoff
replaces it with the DRM stack, so a hotplug at a failing seat converges
within one backoff while a transient failure never tears down a good
layout.
One-shot callers -- session init, pipewire stream setup, capturer info --
keep probing fresh through get_displays, whose failure semantics are
unchanged: replaying a transient failure there would latch an empty answer
into session-long state. Non-drm builds compile none of this.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(wayland): log DRM lookup failure once
* fix(wayland): reset lookup warning after recovery
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* feat(rdp): title the mstsc window after the peer instead of "localhost"
The RDP tunnel launched `mstsc /v:localhost:<port>`, so with several
sessions open every window is titled "localhost" and servers cannot be
told apart.
mstsc titles the session window after the launched .rdp file's base
name, so write a temp .rdp file (containing only the tunnel address)
named after the peer alias, cached hostname, or id, and launch that
instead. Falls back to the old /v: form when no usable name remains
after filename sanitization or the file cannot be written. Credential
handling is unchanged: cmdkey targets "localhost", which is still the
host mstsc resolves credentials against.
Fixesrustdesk/rustdesk#15775 (discussion)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(rdp): set mstsc title without temporary files
Keep launching mstsc with /v so Default.rdp settings are preserved
and unsigned RDP file warnings and policy restrictions are avoided.
Track the launched mstsc process and reapply the peer name when the
window title is reset during connection or reconnection.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* docs(rdp): clarify mstsc title limitation
Signed-off-by: 21pages <sunboeasy@gmail.com>
* feat(rdp): show peer identity with hostname in mstsc title
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): dispose the settings PageController and order dispose() correctly
`dispose()` began with `super.dispose()`, so the mixin chain marked the State
defunct before the WidgetsBindingObserver registration and the periodic timer
were released. The `PageController` was never disposed at all: `Get.delete`
only runs `onDelete()` for a `GetLifeCycleBase`, and a plain `ChangeNotifier`
is not one, so every open/close of the Settings tab leaked one controller with
its listener still attached.
Also guard `switch2page` on the `Rx<SettingsTabKey>` registration it actually
reads rather than only the `PageController` — now that both are really
deleted, a partial teardown would throw into the catch and silently open the
wrong tab — and re-check `mounted` after the await in the `_videoConnTimer`
tick, which `Timer::cancel` cannot stop once the body has started.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* refact: finish the plugin-framework removal sweep
#15854 removed the feature but stopped short of its leftovers:
- `Uninstall`, `Enable`, `Disable`, `Options` and `Please install plugins`
were consumed only by the deleted `flutter/lib/plugin/**`; drop them from
template.rs and the 50 locale files (250 dead entries). `Update` and
`Install` stay, still used by desktop_home_page.dart.
- The server no longer sends `PrvOnFailedPlugin`, and the client no longer
offers to install plugins when privacy mode fails to turn on.
- Drop the MSI `F_Client_Plugins` / `F_Server_Plugins` localization strings;
no `.wxs` references them.
- `_DisplayMenu`'s constructor became a pure pass-through once `pluginItem`
was removed, and the cfg inside `handle_input` repeats the one on the
function itself.
- Normalize `src/lang/sl.rs` to 0644, the only executable file under src/.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(client): handle legacy privacy mode plugin failures
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-authored-by: fufesou <linlong1266@gmail.com>
