* Add Wayland multi-monitor screen capture functionality
* fix wayland capture issues by reverting to CapturerPtr, the problem was that calling Display::all in get_capturer_for_display was dropping the pipewire capturer and causing the video to freeze.
* If running as AppImage or flatpak, ignore the 'multiple' argument
* Comment out warning log with unclear purpose Comment out warning log with unclear purpose
---------
Co-authored-by: fufesou <13586388+fufesou@users.noreply.github.com>
* option `allow-d3d-render`, default false
Add this option because it fails on some machines
Signed-off-by: 21pages <sunboeasy@gmail.com>
* only add nokhwa to windows and linux dependencies
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Adjust bitrate and fps based on TestDelay messages.
* Bitrate is adjusted every 3 seconds, fps is adjusted every second and when receiving test lag.
* Latency optimized at high resolutions. However, when the network is poor, the delay when just connecting or sliding static pages is still obvious.
Signed-off-by: 21pages <sunboeasy@gmail.com>
The normal process is that `startCapture` and `VideoService::run` run in parallel, the `run` function waits for startCapture to complete, then sets the scale, and subsequently calls `stopCapture` and `startCapture`. If the `run` function does not wait long enough, `startCapture` initializes the surface with the original width and height, but the `start` flag is still false, meaning it can't call `stopCapture` and `startCapture`. This results in only capturing the upper-left portion of the virtual display.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* seperate video decoding thread for each display
1. Separate Video Decoding Thread for Each Display
2. Fix Decode Errors When Clearing the Queue
Previously, on-flight frames after clearing the queue could not be decoded successfully. This issue can be resolved by setting a discard_queue flag when sending a refresh message. The flag will be reset upon receiving a keyframe.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* update video format along with fps to flutter
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Fix keyframe interval when auto record outgoing sessions
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Rotate ID3D11Texture2D after duplication with d3d11 video processor.
* If display is not rotated, nothing will be created; If the rotation
fails, it will use the old fallback logic
TODO:
* If changing from Landscape to Landscape(flipped) during capture, the resolution is
not changed, video service fallback to gdi directly.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Add option auto record outgoing session
* In the same connection, all displays and all windows share the same
recording state.
todo:
Android check external storage permission
Known issue:
* Sciter old issue, stop the process directly without stop record, the record file can't play.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Check available when app start from kotlin via get codec info
* For latency free, repeat encode 10 frame at most when capture return WouldBlock
* For changing quality, kotlin support but jni doesn't support, rerun video service when quality is manualy
changed
* 3 or 6 times bitrate for mediacodec because its quality is poor
Signed-off-by: 21pages <pages21@163.com>
* change negotiated codec name to negotiated codec format
Signed-off-by: 21pages <pages21@163.com>
* fallback to vp9 directly if failed to create encoder
Current fallback method is clear hwcodec config
Signed-off-by: 21pages <pages21@163.com>
* show current codec in menu when auto codec is chosen
Signed-off-by: 21pages <pages21@163.com>
---------
Signed-off-by: 21pages <pages21@163.com>
* enable ffmpeg native h26x software decoders for all platforms
* h26x software decoders depend on hwcodec feature, so all platforms
enable it, software h26x decoders are always available like vpx, no available check and no option
* ffmpeg:
- build: mac arm64 build ffmpeg with my m1, others build with ci
- version: win/linux use ffmpeg release/5.1, becaues higher version require higher nvidia driver, other platforms use release/7.0
* test:
- ios not test.
- android: sometimes the screen will appear blurry, but it will recover after a while.
- arm64 linux: test a example of hwcodec repo
Signed-off-by: 21pages <pages21@163.com>
* check hwcodec only when enabled and immediately when clicked enabled
Signed-off-by: 21pages <pages21@163.com>
---------
Signed-off-by: 21pages <pages21@163.com>
* update hwcodec, gpucodec repo is merged to hwcodec
Signed-off-by: 21pages <pages21@163.com>
* rename gpucodec.rs to vram.rs
Signed-off-by: 21pages <pages21@163.com>
* rename all gpucodec to vram, because vram is a feature of hwcodec
Signed-off-by: 21pages <pages21@163.com>
* use one check process and one config file
* set check encode image size to 720p
Signed-off-by: 21pages <pages21@163.com>
---------
Signed-off-by: 21pages <pages21@163.com>
1. Modify the process to have the control side lead the session switching: After the control side sends a `LoginRequest`, the controlled side will add all session information and the current session ID in the `LoginResponse`. Upon receiving the `LoginResponse`, the control side will check if the current session ID matches the ID in the `LoginConfigHandler`. If they match, the control side will send the current session ID. If they don't match, a session selection dialog will pop up, the selected session id will be sent. Upon receiving this message, the controlled side will restart if different or sub service if same .
2. Always show physical console session on the top
3. Show running session and distinguish sessions with the same name
4. Not sub service until correct session id is ensured
5. Fix switch sides not work for multisession session
6. Remove all session string join/split except get_available_sessions in
windows.rs
7. Fix prelogin, when share rdp is enabled and there is a rdp session,
the console is in login screen, get_active_username will be the rdp's
username and prelogin will be false, cm can't be created an that
causes disconnection in a loop
8. Rename all user session to windows session
Known issue:
1. Use current process session id for `run_as_user`, sahil says it can
be wrong but I didn't reproduce.
2. Have not change tray process to current session
3. File transfer doesn't update home directory when session changed
4. When it's in login screen, remote file directory is empty, because cm
have not start up
Signed-off-by: 21pages <pages21@163.com>
* Clarify video capture method
* fix improper level of pointer usage of xcb_generic_error_t
* add ffi of xcb_shm_query_version
* throw a warn about MIT-SHM not working
* add missing #[cfg]
* checks SHM validity on the fly, rather than cache on creation
---------
Co-authored-by: root <root@localhost>
Co-authored-by: rustdesk-fork <rustdesk@fork.com>
1. Explicitly specify the color space as bt601
2. Use fullrange by default for yuv420p if supported
3. Use the pix_fmt space range format to identify codec capabilities, make i444 proto field deprecated, and cause the non-release version of 444 true color to fail.
Signed-off-by: 21pages <pages21@163.com>
