OPTION_ENABLE_WEBRTC (hbb_common 48c2d4d) follows the udp/ipv6 punch
options end to end: default on against the public server, off against
private ones, same settings UI placement on desktop and mobile, and the
same bool2option local-option handling. Gates:
- controller: should_create_webrtc_offerer checks it first — no pc, no
STUN/TURN gathering, no offer in the request;
- controlled: unlike the udp/ipv6 legs, which deliberately follow the
request, answering builds a pc that gathers ICE from this host, so
the answerer honors this machine's own switch too.
Translations for "Enable WebRTC P2P connection" added to all 50 lang
files next to the IPv6 entry (IPv6 and WebRTC are invariant terms in
the same grammatical slot in every one of them).
Also stop probing v6 reachability (test_ipv6) under any forced relay:
the v6 punch socket is never bound there, so the probe was wasted work
on every ws/proxy/relay connection.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
* hbb_common: bump to the port-forward-mux proto
Also latches PortForward.multiplex into login_scope_digest, which
destructures PortForward's fields exhaustively by design (a new field
must be latched or deliberately ignored to compile).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: window accounting and channel frame builders
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: fix RecvWindow counter overflow on long transfers
Replace cumulative accounting (granted/received) with remaining credit
tracking to prevent u32 overflow after 4 GiB of data on a single channel.
Wire behavior is identical, but the fix allows large file transfers
without mid-stream channel closure.
Add regression test for 8 GiB transfer to verify fix.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: credit-windowed relay halves and channel coordinator
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* server: PortForwardMux channel table and per-channel tasks
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* server: multiplexed port-forward connections stay in the protobuf loop
Wire PortForwardMux into Connection: take the multiplexed path at login
when the controller sets PortForward.multiplex, route
PortForwardChannel frames to it from on_message, sweep the channel
table's targets after open/close, and clean it up on connection close.
Introduce is_port_forward() (socket-based or multiplexed) and use it
at the four sites that classify the connection, so a multiplexed
connection stays in the message loop, gets TestDelay keepalives, and
reports features.port_forward_mux in PeerInfo. The three sites that
break into the raw pipe loop or gate the keepalive still check
port_forward_socket specifically, since a multiplexed connection must
not take that path.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* cm: update a port-forward row's targets as tunnel channels come and go
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: controller tunnel with a single-writer stream loop
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: publish Muxed before spawning the tunnel loop
Publishing after spawn let a loop that dies immediately reset the state
first, so the later publish pinned it at Muxed with a dead handle
forever. Also adds a test pinning open-before-data ordering across many
concurrently opened channels, and drops an unused Clone derive.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: share one multiplexed tunnel across a window's listeners
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: fix round 1 review findings
Drop the mux default-false assignment now that definite-assignment proves
every path that reads it has set it; the enable-port-forward-mux config
commit picks up the missing attribution trailers; the default-on test
pins the enable- prefix itself rather than option2bool's weaker fallback.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: end-to-end tests over a loopback tunnel
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: fix bulk test's premature half-close, pin the half-close limitation
many_channels_echo_concurrently_and_a_bulk_one_does_not_starve_them dropped
its bulk write half as soon as writing finished, which shuts down the write
side of the socket and, by design (see the design doc's TCP half-close
non-goal; today's run_forward does the same), ends the whole channel. Keep
the write half alive until the reader is done so the test measures
starvation, not half-close. Add a_local_half_close_ends_the_whole_channel to
pin that limitation in code.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: cap send credit and other final review fixes
Fix 1 (critical): clamp SendCredit to MAX_SEND_CREDIT (= CHANNEL_WINDOW)
in both new() and add(), so a peer with tunnel permission can no longer
advertise an unbounded window and force the controlled side's unbounded
FrameSink::Direct sink to buffer unlimited target data per channel.
Fix 2: rename the "starve" test to many_channels_echo_concurrently and
drop its (untrue) starvation claim, since it opens every channel before
the bulk transfer starts. Add a_channel_opened_during_a_bulk_transfer_
is_served_promptly, which opens the small channel while the bulk one is
demonstrably mid-flight.
Fix 3: only look up the tunnel permission for `open` frames in the
PortForwardChannel arm of on_message, instead of once per data frame.
Fix 4: two rustfmt deviations in connection.rs (matches! wrapping and a
tuple literal), fixed by hand without a blanket cargo fmt run.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: report a refused channel's reason as an error dialog
The controlled side already answers a refused port-forward channel with
opened { success: false, message }; on the multiplexed path TunnelHandle::
on_frame only logged that message at debug and closed the channel, so the
user saw a closed connection with no explanation, worst on the RDP path
where only the RDP client's own error remained. on_frame now returns the
message the window should show, deduplicated per distinct reason (capped
at MAX_REPORTED_OPEN_ERRORS) so one page load's dozen refused connections
surface one dialog per reason instead of a dozen.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* Use on_error for refused-channel dialog in tunnel_loop
Redirect the refused-channel error through the standard on_error path
instead of calling msgbox directly, for consistency with other errors
in the port-forward flow.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: apply the whole-branch review
Correctness:
- listen(): the Legacy arm is merged with the Claimed arm. On its own it
ignored outcome.local_eof, so a client that hung up during login still
got a target connect, an audit record and a CM row on the controlled
side, and ignored outcome.mux, so a peer upgraded while a legacy window
stayed open answered as a tunnel while the controller went raw.
- Refusal dialogs are deduplicated per quiet spell (10 s) rather than per
tunnel lifetime; the lifetime set went silent for the rest of a
long-lived window after the first burst.
- Android's CM listener handles UpdatePortForward; it fell into `_ => {}`.
- relay_socket_to_tunnel reads into one scratch buffer per channel and
sends an exact-size copy. A frame owning its 64 KiB read allocation
pinned it until sent, once per byte on interactive traffic.
Consistency and cleanups:
- The controlled side's refusal text is the raw pipe's wording, RDP
substitution included.
- connection.rs: the PortForwardChannel arm is a one-line hook, the CM
label is pushed from the 1 s tick alone, and the unreachable inner.tx
fall-through is gone.
- The Ready enum is removed; wait_ready() returns Option<Claim>.
- SendCredit::add wakes with notify_one alone.
- on_ui_command() replaces the two ui_receiver handlers in listen().
- TunnelHandle is no longer re-exported (unused-import warning).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a legacy window stays legacy until it is reopened
Review: the merged `Claimed | Legacy` arm gave a legacy window a hot
transition to a tunnel — every accept re-negotiated, and a peer upgraded
while the window stayed open was promoted underneath live connections.
The product does not need a mode switch inside a window's lifetime, and
the transition was extra state-machine surface for nothing: reopening
the window picks up an upgraded peer.
The two arms are separate again. `Claimed` negotiates once and the
peer's answer fixes the window's mode. `Legacy` logs in for every accept
as before, asks for no tunnel — `LoginConfigHandler::port_forward_mux`
carries the request per login, so the raw pipe never has to talk to a
peer that thinks it agreed to multiplex — and ignores what the peer
reports. Both arms keep skipping a local socket that hung up during
login.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* hbb_common: bump to main with rustdesk/hbb_common#594 merged
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* server: admit only INITIAL_WINDOW on a channel before opened
The demultiplexer accepted CHANNEL_WINDOW into a pending channel's
unbounded queue, four times the bound the channel task enforces once
it polls. The window now starts at INITIAL_WINDOW and is widened right
before `opened` advertises the rest.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: a tunnel ends when its window drops the Tunnel
The loop held its own handle and state sender, so once the window
closed nothing was left to stop it: it kept answering TestDelay and the
peer connection, CM row included, lived on until the peer went away.
`Tunnel` now owns a watch sender nobody sends on; the loop's receiver
errors when the last `Tunnel` drops, and the loop ends.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: one tunnel per mapping, bound to the authenticated target
The login latches `PortForward.host`/`port` into the session scope and
approval is shown that target, but a window-wide tunnel let any later
`open` name another target with only `enable-tunnel` rechecked. A
tunnel now belongs to one listener and serves the one target its login
authenticated: the controlled side refuses an `open` for any other
target, and a window with several targets uses one connection each,
approved on its own.
With one owner per tunnel the claim needs no waiters: `Establishing`,
`Claim::Wait` and `wait_ready` go, and `try_claim` becomes a plain
read. The CM label that followed a tunnel's targets goes with them; a
row shows its mapping's target, as before.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the legacy comment names the mapping, not the window
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: a window violation drops the channel on the spot
Both demultiplexers only queued a `Violation` and left the entry until
the channel task woke and exited, so a peer that kept sending past the
window queued one more entry per frame in the meantime, bounded by
nothing. The entry now goes the moment `accept` fails; later frames for
that id are unknown-channel noise.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the login's target travels with the accept, not the handler
`listen()` wrote `lc.port_forward` (and, on this branch, `port_forward_mux`)
into the window's shared `LoginConfigHandler` before connecting, and
`create_login_msg` read them back only when the peer's `Hash` arrived.
Two mappings logging in at the same time could therefore swap targets:
on master that bridged a local socket to the wrong target, and with a
tunnel bound to its login's target it also left the mapping refusing
every later accept until it was recreated.
The target is now a `PortForward` carried by the interface clone that
handles one accept, passed explicitly down to `create_login_msg`; the
handler no longer has a field to race on. No lock spans the login.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: pin permission revocation and whole-tunnel failure in tests
Both already hold; the review asked for them to be stated. `enable-tunnel`
turned off mid-session refuses the next `open` while the live channel
keeps relaying, and a dead tunnel ends every channel on it together,
after which the next accept establishes again on the same `Tunnel`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the legacy comment names re-adding the mapping only
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the raw pipe runs the code it always ran
The multiplexed login had replaced `connect_and_login`, so a mapping
with the setting off, a peer without the feature, or a listener latched
`Legacy` still went through the tunnel's state machine, the capped
pre-read and the changed local-EOF rule. Feature off now means the old
code: `listen()` keeps its accept arm and `connect_and_login` as they
were, and the tunnel is a branch taken only when the setting is on, in
`establish_tunnel` with its own `connect_and_login_mux`. The one line
the raw path does differently is the target riding with the accept's
interface clone instead of the shared handler.
`get_port_forward_mux_enabled` had one caller and moves in here, so
`common.rs` is untouched.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a UI login answers the challenge its own connection was given
`handle_login_from_ui` hashed the typed password against `lc.hash`, the
window's shared handler field, and the window's password prompt is
broadcast to every listener. With two mappings both waiting on that
prompt, the `Hash` that arrived last had overwritten the other's, so
one of the two answered the wrong challenge and failed to log in.
Master shares the same state and broadcasts the same way.
The `Hash` is now a parameter of the login; `Session` keeps it beside
the connection it belongs to, and the per-accept clone that
`with_port_forward` makes gets a slot of its own. `lc.hash` stays for
`handle_peer_info`, which only needs the salt, and that is per peer.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a mapping without its hash waits for it before answering the prompt
The window's password prompt is broadcast to every mapping, and can
reach one whose own connection has not received its `Hash` yet. That
mapping used to answer anyway, with a digest over an empty challenge:
the peer refused it and counted a failed attempt, and the empty-salt
result was written into the shared `lc.password`, where the mapping that
prompted had just stored the right one and the next `handle_peer_info`
would persist whatever was there.
The connection's challenge is now `Option<Hash>`, `None` until
`handle_hash` runs, and `handle_login_from_ui` sends nothing without it.
The mapping that prompted stores the salted password in the shared
handler, and the waiting one logs in with that against its own challenge
when its `Hash` arrives, without prompting again.
Test: A answers its prompt, the same broadcast reaches B before its
hash, B sends nothing, B's hash arrives and its login carries B's
challenge and B's target with no dialog. It runs the real `handle_hash`
for B.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the tunnel's login is the raw pipe's, asked for by a window flag
Master's fix for the shared login slots (#16069) keeps the target and
the challenge in the window's `LoginConfigHandler` and serializes the
mappings' logins with a turn lock, all inside `port_forward.rs`. This
branch had carried a broader shape of the same fix, a `with_port_forward`
on `Interface` and the target and `Hash` as parameters through the login
functions, which every caller had to follow. That is gone: `Interface`,
`Session`, `create_login_msg`, `send_login`, `handle_hash` and
`handle_login_from_ui` are as on master.
What the tunnel needs on top is one bit in the login, `multiplex`. It is
a window flag beside `port_forward` in the handler, set once in `io_loop`
before the window's mappings start, so an accept's claim and its login
read the same value; the setting takes effect for windows opened after
it changes. `connect_and_login_mux` is now master's `connect_and_login`
with the tunnel's three differences and the same `hash_arrived` and
`login_from_ui` calls. The raw pipe is master's, line for line.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* hbb_common: bump to main with rustdesk/hbb_common#595 merged
840c8ec..f94e3fe is that one merge: the five local settings custom
clients could not preset.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the off switch gets a checkbox in Settings → General
`enable-port-forward-mux` was readable only by editing the config file.
It is a local setting of the controlling side, so it sits with the other
outgoing ones, after "Open connection in new tab", with a tooltip saying
what it does.
The two new keys are translated in every language. The three that the
mobile file manager added, "Export", "Export Logs" and "Import Folder",
were empty everywhere but five languages; they are filled in too, and
Korean's "xdp-portal-unavailable" with them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* Urdu: fill the backlog of empty and missing translations
ur.rs had fallen behind: 104 keys carried an empty value and 35 keys the
other languages have were absent altogether. Both are filled in, the
missing ones in the order template.rs lists them.
Eight entries stay empty on purpose. They are keys that only ur.rs still
carries, absent from template.rs and from every other language, so their
English source cannot be recovered and nothing reads them:
remember_account_tip, os_account_desk_tip, another_user_login_*_tip,
xorg_not_found_*_tip and no_desktop_*_tip. Twelve more dead keys keep
the values they have; removing either group is a separate decision.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* Urdu: drop the keys template.rs no longer lists
The twenty keys removed here are absent from template.rs and from every
other language file; ur.rs was the only one still carrying them, eight
of them with no value at all. They are leftovers of features that are
gone: the plugin menu, the OS-account login prompts, the Xorg and
no-desktop errors.
ur.rs now holds exactly the template's key set, all of it translated.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: closing the tunnel reaches channels parked on their socket
A channel whose far end neither reads nor writes has both relays parked
on the socket, not on the inbound queue, so `close_all` dropping the
queue's sender woke neither: the socket and both tasks lived on until
the far end hung up. Both sides now hold a per-tunnel teardown signal
that `run_channel` selects on beside its own cancel, and `close_all`
sends it after clearing the map.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a mapping latched to the raw pipe logs in without asking for the tunnel
The login copied the window's `port_forward_mux` into `multiplex`, so a
mapping that had latched to the raw pipe on an old peer kept asking for
the tunnel. Once that peer was upgraded it answered with a tunnel while
the controller switched to raw framing, and every later connection on
the mapping was dead until it was re-added. The login now carries its
own `port_forward_multiplex`, filled with the target under the turn
lock: the probe asks, the raw pipe does not.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a channel opened as its tunnel closes still gets the teardown
`open` can straddle `close_all`: the claim passed, the frame receiver was
still alive, and the channel subscribed after the signal had gone out.
`watch::subscribe` marks earlier sends as seen, and the entry sits in a
map that was already cleared, so nothing would ever end it. The signal is
now a level: `close_all` raises it with `send_replace`, which stores even
with no channel live, and `run_channel` waits for the value rather than
for a change.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the connect guard counts a live tunnel as connected
`connect_port_forward_if_needed` returned early only for a raw-pipe
socket; called again with a tunnel up it would have built a second
`PortForwardMux` and dropped every channel of the first. Not reachable
today, since the logon response is sent once, but the other checks in
this change already read `is_port_forward()`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* Urdu: the two terminal clipboard keys master added
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a tunnel's TCP stream refuses packets over twice MAX_FRAME
The codec takes a header declaring up to 1 GiB and hands the packet up
only once it has all arrived, so the channel window bounded what the
peer may send, not what this side buffers. Both sides now cap the codec
at 2 * MAX_FRAME as soon as multiplexing is agreed: a data frame with
its envelope and MAC fits with room to spare, and a header over the cap
ends the tunnel before a byte of payload is read. TCP only; the
WebSocket and WebRTC codecs carry caps of their own.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a channel id still live when the counter comes round is skipped
The controller handed out `next_id` unchecked. 2^32 opens later it lands
on a channel still up: the entry here was replaced, while the peer,
which ignores an `open` for a live id, kept routing that id to the old
socket, so the new local connection's bytes went into the old target
connection. The id is now taken under the map's lock and advanced past
any id in use.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
The dropdown beside Connect listed file transfer, camera and terminal
but not port forwarding, so reaching it meant having a card for the
peer. `connect` already takes `isTcpTunneling`; only the menu entry and
the parameter that carries it were missing.
Shown on desktop only. The peer card gates the same entry on `isDesktop`
because `connect` routes a tunnel through the desktop path alone; on web
it would have opened a plain remote session instead.
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* feat(clipboard): optionally sync clipboard between connected sessions
Clipboard content received from a remote session is written to the local
clipboard with an owner marker, so the client clipboard loop deliberately
skips re-broadcasting it to avoid echo loops. As a result, text copied in
one remote window could not be pasted in another connected remote window.
Add an opt-in local option (allow-sync-clipboard-between-sessions) that
relays Clipboard/MultiClipboards messages received from one session to
all other connected sessions, excluding the source session. Per-session
clipboard permissions and view-only mode are still respected via the
existing send path, and the owner marker on the receiving peers prevents
any echo back.
Desktop (flutter) only; file clipboard is not affected.
* fix(lang): propagate sync-clipboard-between-sessions-tip to all locale files
Add the new key to template.rs and every locale file per the localization
convention, move the en.rs entry to the end of the list, and drop comments
that only restated the names next to them.
* fix(lang): add the 'Sync clipboard between sessions' label to the localization catalog
The checkbox label goes through translate(), so add it to template.rs
and every locale file so non-English locales can translate it. en.rs is
skipped since the English display text is identical to the key.
* fix(clipboard): check the source session's full clipboard permission before relaying
The relay was gated only by the incoming clipboard_allowed check
(!disable_clipboard && !view_only). Gate it with
is_text_clipboard_required() instead, which additionally respects the
source session's server_clipboard_enabled and server_keyboard_enabled
state, matching the predicate already applied to destination sessions.
A message arriving after the source permission was revoked (or from a
non-conforming peer) is no longer propagated to other sessions. The
existing local update_clipboard behavior is unchanged.
* fix(lang): translate the new clipboard sync entries in all locale files
Fill the 'Sync clipboard between sessions' label and its tooltip in
every locale file instead of leaving them blank, following each file's
existing terminology. template.rs keeps the empty master entries.
* fix(linux): a session logout should hand the peer to the login screen
Logging out closes every window in the session, the connection manager's
included, and its close handler kicks every peer with the reason a person
gets when they disconnect one by hand. That reason is the one thing the
client never retries on, so the remote session dies on a frozen frame
instead of reconnecting to the greeter that is already there.
The close carries nothing to tell the two apart: measured on KDE, the CM
receives no signal and logind still reports the session active at that
instant, and the server is killed within a few hundred ms either way, so
neither a state check nor a grace period can decide it. What is
distinguishable is the ACTION: disconnecting a peer is not the same event
as this window going away. So the window-close path now says so, and the
server ends the session without poisoning the retry; the Disconnect
button and the app's own close control keep kicking exactly as before.
Linux only, since that is where a logout closes the window.
Verified on plasma/sddm with a client attached: a logout now reconnects
to the greeter with no dialog, while closing the manager window still
shows Closed manually by the peer.
* fix(linux): close the tunnel too, and keep the web build compiling
Three seams the first pass missed. The web bridge is hand written, not
generated, so the new call needs its stub there or flutter build web
stops compiling - and that job is disabled in CI, so it would have gone
green. try_port_forward_loop is a second consumer of the same channel
and only knew Close, so a forwarded tunnel outlived the window it was
supposed to die with. And the variant had landed inside the DRM section,
whose comment says everything below it is drm-gated.
* fix(windows): restore keyboard focus when the cursor re-enters the remote image
On Windows the raw key focus node is unfocused on window blur and nothing
requests it back, so returning to an already connected session left the
keyboard dead until the remote image was clicked.
Request focus from enterView(), gated on the window being active, the tab
being selected and no blocking overlay, so a background window cannot grab
system keys. enterOrLeave(true) is still driven by RawKeyFocusScope's
onFocusChange, so it is not called twice.
* fix(windows): refocus on window focus when the cursor already hovers the image
Alt+Tab or a taskbar click returns focus without a PointerEnter, so
enterView() cannot restore the keyboard. Reuse _cursorOverImage, gated
on the selected tab and no blocking overlay.
* refactor(windows): share one focus predicate for every requestFocus path
The relative-mouse-mode restore on window focus could hand remote input
to this page while a blocking dialog was up or the tab was not selected.
* fix(flutter): make Adjust Window reliable across desktop platforms
- Fix incorrect sizing on scaled displays by calculating the target from the
rendered canvas scale and platform-specific window coordinate units.
- Fix adjustments using the wrong monitor by querying the current remote
window's screen, with the main window as fallback.
- Fix stale geometry after fullscreen or maximized transitions by refreshing
metrics before calculating and applying the target frame.
- Fix fullscreen availability checks on Windows and macOS by predicting the
restored window borders and caching each macOS window's pre-fullscreen work area.
- Fix incorrect Linux work areas by handling GNOME Wayland fractional scaling
and caching compositor/X11 work-area measurements when visibleFrame is wrong.
- Prevent unsafe adjustments by rejecting invalid, oversized, or implausibly
small target frames.
- Avoid failures during window teardown by skipping adjustment when the view,
screen, or native window frame is unavailable.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): harden Adjust Window handling
- Use the dynamic Linux resize edge when predicting restored window bounds.
- Treat GNOME fractional-scaling lookup failures as unknown without repeating
the lookup for the remote window.
- Stop adjustment safely when native window calls fail during window teardown.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): correct Linux monitor selection
Update window_size to use monitor height for vertical bounds, preventing incorrect screen selection with vertically stacked displays.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* docs(flutter): simplify Linux screen handling comments
Keep the source rationale concise and move platform measurements and investigation details out of the implementation.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): align Adjust Window resize padding
Use the shared drag-to-resize padding for Linux restored-window predictions so menu validation matches the applied frame dimensions.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): remove Adjust Window screen fallback
Return null when the current window screen is unavailable instead of using the main window's scale factor and work area.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(linux): query Mutter monitor layout mode
Use DisplayConfig.GetCurrentState instead of inferring scaling from
experimental features, and handle Ubuntu's UI-scaled logical mode.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): use native maximized state for Wayland cache
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): allow Adjust Window to fill work area
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): avoid racing screen info updates
Signed-off-by: 21pages <sunboeasy@gmail.com>
* refactor(flutter): remove dead Adjust Window web plumbing
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): tolerate near-unity Wayland scale factors
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): harden window screen detection
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(linux): drop deprecated GNOME session detection
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): remove GNOME monitor layout mode flutter cache
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix: hide the printer settings tab when settings are disabled
The Security and Network tabs already honour `disable-settings`, but the
Printer tab was gated only on `hide-remote-printer-settings`, so custom
clients built with settings disabled still exposed it.
https://github.com/rustdesk/rustdesk-server-pro/issues/1001
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* feat: add hide-general-settings builtin option
Hides the General tab of the settings page. Unlike the other
hide-*-settings options this one is still useful when settings are
disabled, since `disable-settings` does not cover the General tab.
https://github.com/rustdesk/rustdesk-server-pro/issues/1001
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(flutter): dispose the settings PageController and order dispose() correctly
`dispose()` began with `super.dispose()`, so the mixin chain marked the State
defunct before the WidgetsBindingObserver registration and the periodic timer
were released. The `PageController` was never disposed at all: `Get.delete`
only runs `onDelete()` for a `GetLifeCycleBase`, and a plain `ChangeNotifier`
is not one, so every open/close of the Settings tab leaked one controller with
its listener still attached.
Also guard `switch2page` on the `Rx<SettingsTabKey>` registration it actually
reads rather than only the `PageController` — now that both are really
deleted, a partial teardown would throw into the catch and silently open the
wrong tab — and re-check `mounted` after the await in the `_videoConnTimer`
tick, which `Timer::cancel` cannot stop once the body has started.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* refact: finish the plugin-framework removal sweep
#15854 removed the feature but stopped short of its leftovers:
- `Uninstall`, `Enable`, `Disable`, `Options` and `Please install plugins`
were consumed only by the deleted `flutter/lib/plugin/**`; drop them from
template.rs and the 50 locale files (250 dead entries). `Update` and
`Install` stay, still used by desktop_home_page.dart.
- The server no longer sends `PrvOnFailedPlugin`, and the client no longer
offers to install plugins when privacy mode fails to turn on.
- Drop the MSI `F_Client_Plugins` / `F_Server_Plugins` localization strings;
no `.wxs` references them.
- `_DisplayMenu`'s constructor became a pure pass-through once `pluginItem`
was removed, and the cfg inside `handle_input` repeats the one on the
function itself.
- Normalize `src/lang/sl.rs` to 0644, the only executable file under src/.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(client): handle legacy privacy mode plugin failures
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-authored-by: fufesou <linlong1266@gmail.com>
* feat(recording): add visibility and service storage options
- support hide-recording-button in Flutter and Sciter
- allow a custom save directory for Windows service recordings
- sanitize peer IDs used in recording filenames
Tested:
- with hide-recording-button=Y and allow-auto-record-outgoing=Y,
outgoing sessions are recorded automatically while the recording button
remains hidden and cannot be stopped from the UI; verified on Flutter
desktop, Sciter, and Android
- windows-service-video-save-directory takes effect when the Windows client
runs as an installed service
- the Windows controlling side can save recordings for direct IP:port
connections
Signed-off-by: 21pages <sunboeasy@gmail.com>
* update hbb_common
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(recording): validate configured save directories
- trim configured recording directory paths
- reject non-absolute paths and fall back to defaults
- warn when a non-empty path is invalid
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(recording): validate configured save directories
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Fix Adjust Window sizing across DPI and fullscreen transitions
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Use visible screen frame for Adjust Window
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Tolerate floating-point errors in Adjust Window sizing
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Fix review, fix Adjust Window async metric guards
Capture the current screen before awaiting window geometry so one target-frame calculation uses consistent screen metrics.
Return early when adjusting without a context and the Flutter view list is empty, instead of calling views.first after the window or engine may have been torn
down.
Clarify the platform coordinate units used for Adjust Window scaling.
* Fix Adjust Window for maximized Linux windows
Unmaximize Linux remote windows before applying Adjust Window because native setFrame may be ignored while the window is maximized.
* Fix Adjust Window screen refresh guards
Refresh screen metrics before checking Adjust Window availability and again after exiting fullscreen so target-frame calculation uses current window geometry.
Hide Adjust Window on web because resizing relies on desktop window APIs.
* Fix review, handle missing window frame in Adjust Window
Return null when WindowController.getFrame fails so Adjust Window availability checks and resize attempts skip cleanly if the window is hidden or disposed.
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Feature: add monitor-switch buttons to remote toolbars
Add buttons to cycle through the remote displays from the toolbars:
- A main-toolbar button and a minimized-handle button, both using a shared SVG icon with the current monitor number overlaid.
- Two opt-in settings under Settings/Other. The minimized-toolbar option is nested under the main-toolbar option.
- The minimized button only appears once the toolbar is collapsed.
- Cycling does not move the remote cursor, matching the existing in-toolbar monitor buttons.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* fix: respect individual-window display mode when cycling
In "Show displays as individual windows" mode, route the cycle button through openMonitorInNewTabOrWindow like the monitor selector, so each display keeps its own window instead of repurposing the current one.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
---------
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* Feature: add monitor-switch buttons to remote toolbars
Add a one-click "switch to next monitor" control to both desktop toolbars:
- Main toolbar: always shown when the remote has more than one monitor,
styled to match the existing blue icon buttons (white screen, black number).
- Minimized (draggable show/hide) toolbar: off by default, toggled via a new
"Show monitor switch on minimized toolbar" checkbox in the Display menu and
persisted as a local option.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* Update remote_toolbar.dart
* refact: unify monitor-switch button icons, share tooltip
Addressing the review feedback on the monitor-switch toolbar buttons:
- Add assets/display_switcher.svg and use it for both the main and minimized buttons. This replaces the hand-drawn glyph (Containers + magic numbers) on the main toolbar. The icon scales with DPI/theme and the two toolbars stay visually consistent.
- Flip the minimized button's label to white for contrast, since the new icon has a solid screen.
- Move the tooltip string into a shared _MonitorCycle.tooltip getter so both buttons use one source of truth.
- Use const Offstage() for consistency with the surrounding returns.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* Improve monitor-switch settings and toolbar behavior
- Nest the minimized-toolbar option under the main one in settings only show when the main option is enabled.
- Only show the minimized switch button on the collapsed toolbar handle, so it no longer duplicates the main switch while the toolbar is expanded.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
---------
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
Co-authored-by: RustDesk <71636191+rustdesk@users.noreply.github.com>
* Drag whole toolbar; snap to all four edges
Today the drag handle on the remote-session toolbar repositions only
the handle row -- the icons themselves stay centered at the top. This
change applies the position to the entire toolbar wrapper so dragging
the handle moves the whole thing, and extends snapping from top-only
to any of the four window edges.
When docked left/right the toolbar reflows vertically. A live ghost
preview shows where the toolbar will land while you drag, with a small
hysteresis bias to keep the preview from flickering near corners.
The legacy 'remote-menubar-drag-x' session option is read as a fallback
on first load so existing users keep their saved horizontal position;
new option keys are 'remote-menubar-edge' and 'remote-menubar-frac'.
Tested locally on Windows. macOS / Linux / web desktop use the same
shared widget with no platform-specific calls, but I did not verify
them.
* Load edge independently and clamp loaded fraction
Addresses CodeRabbit review on #15051: parse the saved edge regardless
of whether the new fraction option is present so a partial write of
frac doesn't reset the toolbar back to top, and clamp the loaded
fraction to the kOptionRemoteMenubarDragLeft/Right contract so a
corrupted or out-of-range saved value can't bypass the bounds until
the user drags again.
* Require edge activation zone to switch dock; preserve horizontal slide
Per review feedback on #15051: nearest-edge-wins made a low-intent
horizontal slide too easy to escalate into a high-impact orientation
change (vertical reflow on left/right dock). The default drag now
keeps the toolbar on its current dock edge and just updates the
fraction along that edge -- the prior horizontal-slide behavior.
An alternate edge is only previewed/committed when the cursor enters
its 32 px activation zone; once previewed, the cursor has to move
back 64 px before reverting (hysteresis at the zone boundary).
* Gate multi-edge docking behind a settings toggle; default = horizontal slide
Replaces the activation-zone approach with an explicit opt-in setting
in Settings -> Other ("Allow docking remote toolbar to any window
edge"). This addresses the concern that a low-intent horizontal drag
shouldn't be able to trigger a high-impact orientation change, while
still letting users who want multi-edge docking opt in cleanly.
Default (toggle off):
- The original horizontal slide is preserved.
- The bug fix from the first commit still applies: dragging the
handle moves the whole toolbar, and the position persists across
collapse/expand (no more re-center on re-open).
- Draggable is axis-locked to horizontal so the feedback widget
stays on the top line during drag.
Opt-in (toggle on):
- Full nearest-edge wins with the live preview ghost and corner
hysteresis; toolbar reflows vertically on left/right docks.
- Draggable is unlocked for 2D drag.
Reads the option via mainGetLocalBoolOptionSync so the toolbar's
default state matches what the settings checkbox shows; the option
key uses the allow- prefix so unset defaults to off.
Takes effect on next session (setting is read at session init).
The setting key (allow-multi-edge-toolbar-dock) is read by the
existing local-options machinery and persists per-install without
needing to be registered in libs/hbb_common's KEYS_LOCAL_SETTINGS.
Can add that registration in a parallel hbb_common PR if preferred.
* Fix remote toolbar drag positioning & persistence
Align drag fraction calculation with the toolbar's actual travel range,
keep preview sizing stable during drag, and preserve legacy horizontal
position storage when multi-edge docking is disabled.
Signed-off-by: fufesou <linlong1266@gmail.com>
* Remote toolbar snap edges
1. Translations
2. Apply option to remote windows on changed
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix: avoid remote toolbar docking jumps on setting reload
Signed-off-by: fufesou <linlong1266@gmail.com>
* Fix remote toolbar docking updates and drag sync
Signed-off-by: fufesou <linlong1266@gmail.com>
* refact: translation key
Signed-off-by: fufesou <linlong1266@gmail.com>
* feat(toolbar-snap-edges): test web
Signed-off-by: fufesou <linlong1266@gmail.com>
* Fix remote toolbar docking sync and vertical layout
Signed-off-by: fufesou <linlong1266@gmail.com>
* Fix remote toolbar monitor controls on side docks
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
Co-authored-by: fufesou <linlong1266@gmail.com>
* add option to hide stop-service when service is running
Signed-off-by: 21pages <sunboeasy@gmail.com>
* update hbb_common to upstream
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* avatar
* refactor avatar display: unify rendering and resolve at use time
- Extract buildAvatarWidget() in common.dart to share avatar rendering
logic across desktop settings, desktop CM and mobile CM
- Add resolve_avatar_url() in Rust, exposed via FFI (SyncReturn),
to resolve relative avatar paths (e.g. "/avatar/xxx") to absolute URLs
- Store avatar as-is in local config, only resolve when displaying
(settings page) or sending (LoginRequest)
- Resolve avatar in LoginRequest before sending to remote peer
- Add error handling for network image load failures
- Guard against empty client.name[0] crash
- Show avatar in mobile settings page account tile
Signed-off-by: 21pages <sunboeasy@gmail.com>
* web: implement mainResolveAvatarUrl via js getByName
Signed-off-by: 21pages <sunboeasy@gmail.com>
* increase ipc Data enum size limit to 120 bytes
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
Co-authored-by: 21pages <sunboeasy@gmail.com>
* feat(terminal): add reconnection buffer support for persistent sessions
Fix two related issues:
1. Reconnecting to persistent sessions shows blank screen - server now
automatically sends historical buffer on reconnection via SessionState
machine with pending_buffer, eliminating the need for client-initiated
buffer requests.
2. Terminal output before view ready causes NaN errors - buffer output
chunks on client side until terminal view has valid dimensions, then
flush in order on first valid resize.
Rust side:
- Introduce SessionState enum (Closed/Active) replacing bool is_opened
- Auto-attach pending buffer on reconnection in handle_open()
- Always drain output channel in read_outputs() to prevent overflow
- Increase channel buffer from 100 to 500
- Optimize get_recent() to collect whole chunks (avoids ANSI truncation)
- Extract create_terminal_data_response() helper (DRY)
- Add reconnected flag to TerminalOpened protobuf message
Flutter side:
- Buffer output chunks until terminal view has valid dimensions
- Flush buffered output on first valid resize via _markViewReady()
- Clear terminal on reconnection to avoid duplicate output from buffer replay
- Fix max_bytes type (u32) to match protobuf definition
- Pass reconnected field through FlutterHandler event
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(terminal): add two-phase SIGWINCH for TUI app redraw and session remap on reconnection
Fix TUI apps (top, htop) not redrawing after reconnection. A single
resize-then-restore is too fast for ncurses to detect a size change,
so split across two read_outputs() polling cycles (~30ms apart) to
force a full redraw.
Also fix reconnection failure when client terminal_id doesn't match
any surviving server-side session ID by remapping the lowest surviving
session to the requested ID.
Rust side:
- Add two-phase SIGWINCH state machine (SigwinchPhase: TempResize →
Restore → Idle) with retry logic (max 3 attempts per phase)
- Add do_sigwinch_resize() for cross-platform PTY resize (direct PTY
and Windows helper mode)
- Add session remap logic for non-contiguous terminal_id reconnection
- Extract try_send_output() helper with rate-limited drop logging (DRY)
- Add 3-byte limit to UTF-8 continuation byte skipping in get_recent()
to prevent runaway on non-UTF-8 binary data
- Remove reconnected flag from flutter.rs (unused on client side)
Flutter side:
- Add reconnection screen clear and deferred flush logic
- Filter self from persistent_sessions restore list
- Add comments for web-related changes
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
* - UI display: display_name first
- Fallback: name
- Technical identity: still name
### What changed
- Added account display helpers and display_name state in user model:
- flutter/lib/models/user_model.dart:16
- Account/logout label now uses display_name (@name) when both exist:
- flutter/lib/mobile/pages/settings_page.dart:689
- flutter/lib/desktop/pages/desktop_setting_page.dart:2016
- flutter/lib/desktop/pages/desktop_setting_page.dart:2135
- Desktop Account info now shows both when applicable:
- Display Name: ...
- Username: ...
- flutter/lib/desktop/pages/desktop_setting_page.dart:2039
- Previously done group-list behavior remains:
- group user list displays display_name with name fallback
- flutter/lib/common/widgets/my_group.dart:187
- Persistence path for display_name remains enabled (including group cache/submodule field):
- libs/hbb_common/src/config.rs:2347
- src/client.rs:2630
- LoginRequest.my_name now resolves as:
1. OPTION_DISPLAY_NAME (manual override)
2. user_info.display_name
3. user_info.name
4. OS username fallback
* 1. GUID key (...Uninstall\{GUID}) is MSI-native metadata generated by Windows Installer.
2. Non-GUID key (...Uninstall\RustDesk) is explicitly written by RustDesk’s MSI compatibility component in res/msi/Package/Components/Regs.wxs:44, populated by preprocess.py --arp from .github/workflows/
flutter-build.yml:262.
So they were not using the same EstimatedSize logic:
- MSI GUID key: MSI-calculated size (KB).
- RustDesk key: custom script value from res/msi/preprocess.py:339 (previously bytes, now fixed to KB).
That mismatch is exactly why you saw different sizes.
* improve display name handling
- Append (@username) when multiple users share the same display name
- Trim whitespace from display_name before comparison and display
- Add missing translate() for Logout button on desktop
Signed-off-by: 21pages <sunboeasy@gmail.com>
* group peer filter match both user's display name and user's name
Signed-off-by: 21pages <sunboeasy@gmail.com>
* case-insensitive search in group peer filter
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
Co-authored-by: 21pages <sunboeasy@gmail.com>
