TCP punching was the one direct transport without a switch, while UDP,
IPv6 and WebRTC each had one. Add "Enable TCP hole punching" above the
UDP toggle on both desktop and mobile, default on — including on
self-hosted servers, since unlike the other three (whose default-off
there guards against an hbbs that cannot forward their fields) TCP
punching has always been supported by every server.
Turning all four off would leave no way to punch at all, so TCP runs
regardless in that case. That backstop keys off the switches alone: a
transport that is enabled but fails to materialize — no public v6
address, no NAT port, a failed offerer — is already covered by the
relay fallback for a round that ends up with no usable direct
transport. With the TCP punch off, the fallback request is skipped
too: it exists only to carry that punch, and would otherwise reach
connect() with nothing to try and merely open a second relay.
Known cost, unchanged behavior for the peer: the request carries no
field for this choice, so a peer that receives one with no udp_port and
no offer still punches a TCP hole and listens for a connection the
controller will not make. Representing the transport choice on the
wire needs a proto field and the server forwarding it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016HV43uh1ztv6Wm5qi3Y1ne
OPTION_ENABLE_WEBRTC (hbb_common 48c2d4d) follows the udp/ipv6 punch
options end to end: default on against the public server, off against
private ones, same settings UI placement on desktop and mobile, and the
same bool2option local-option handling. Gates:
- controller: should_create_webrtc_offerer checks it first — no pc, no
STUN/TURN gathering, no offer in the request;
- controlled: unlike the udp/ipv6 legs, which deliberately follow the
request, answering builds a pc that gathers ICE from this host, so
the answerer honors this machine's own switch too.
Translations for "Enable WebRTC P2P connection" added to all 50 lang
files next to the IPv6 entry (IPv6 and WebRTC are invariant terms in
the same grammatical slot in every one of them).
Also stop probing v6 reachability (test_ipv6) under any forced relay:
the v6 punch socket is never bound there, so the probe was wasted work
on every ws/proxy/relay connection.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ExUfAkYbq8UC9pQCiLy8TQ
* hbb_common: bump to the port-forward-mux proto
Also latches PortForward.multiplex into login_scope_digest, which
destructures PortForward's fields exhaustively by design (a new field
must be latched or deliberately ignored to compile).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: window accounting and channel frame builders
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: fix RecvWindow counter overflow on long transfers
Replace cumulative accounting (granted/received) with remaining credit
tracking to prevent u32 overflow after 4 GiB of data on a single channel.
Wire behavior is identical, but the fix allows large file transfers
without mid-stream channel closure.
Add regression test for 8 GiB transfer to verify fix.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: credit-windowed relay halves and channel coordinator
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* server: PortForwardMux channel table and per-channel tasks
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* server: multiplexed port-forward connections stay in the protobuf loop
Wire PortForwardMux into Connection: take the multiplexed path at login
when the controller sets PortForward.multiplex, route
PortForwardChannel frames to it from on_message, sweep the channel
table's targets after open/close, and clean it up on connection close.
Introduce is_port_forward() (socket-based or multiplexed) and use it
at the four sites that classify the connection, so a multiplexed
connection stays in the message loop, gets TestDelay keepalives, and
reports features.port_forward_mux in PeerInfo. The three sites that
break into the raw pipe loop or gate the keepalive still check
port_forward_socket specifically, since a multiplexed connection must
not take that path.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* cm: update a port-forward row's targets as tunnel channels come and go
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: controller tunnel with a single-writer stream loop
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: publish Muxed before spawning the tunnel loop
Publishing after spawn let a loop that dies immediately reset the state
first, so the later publish pinned it at Muxed with a dead handle
forever. Also adds a test pinning open-before-data ordering across many
concurrently opened channels, and drops an unused Clone derive.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: share one multiplexed tunnel across a window's listeners
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: fix round 1 review findings
Drop the mux default-false assignment now that definite-assignment proves
every path that reads it has set it; the enable-port-forward-mux config
commit picks up the missing attribution trailers; the default-on test
pins the enable- prefix itself rather than option2bool's weaker fallback.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: end-to-end tests over a loopback tunnel
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: fix bulk test's premature half-close, pin the half-close limitation
many_channels_echo_concurrently_and_a_bulk_one_does_not_starve_them dropped
its bulk write half as soon as writing finished, which shuts down the write
side of the socket and, by design (see the design doc's TCP half-close
non-goal; today's run_forward does the same), ends the whole channel. Keep
the write half alive until the reader is done so the test measures
starvation, not half-close. Add a_local_half_close_ends_the_whole_channel to
pin that limitation in code.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: cap send credit and other final review fixes
Fix 1 (critical): clamp SendCredit to MAX_SEND_CREDIT (= CHANNEL_WINDOW)
in both new() and add(), so a peer with tunnel permission can no longer
advertise an unbounded window and force the controlled side's unbounded
FrameSink::Direct sink to buffer unlimited target data per channel.
Fix 2: rename the "starve" test to many_channels_echo_concurrently and
drop its (untrue) starvation claim, since it opens every channel before
the bulk transfer starts. Add a_channel_opened_during_a_bulk_transfer_
is_served_promptly, which opens the small channel while the bulk one is
demonstrably mid-flight.
Fix 3: only look up the tunnel permission for `open` frames in the
PortForwardChannel arm of on_message, instead of once per data frame.
Fix 4: two rustfmt deviations in connection.rs (matches! wrapping and a
tuple literal), fixed by hand without a blanket cargo fmt run.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: report a refused channel's reason as an error dialog
The controlled side already answers a refused port-forward channel with
opened { success: false, message }; on the multiplexed path TunnelHandle::
on_frame only logged that message at debug and closed the channel, so the
user saw a closed connection with no explanation, worst on the RDP path
where only the RDP client's own error remained. on_frame now returns the
message the window should show, deduplicated per distinct reason (capped
at MAX_REPORTED_OPEN_ERRORS) so one page load's dozen refused connections
surface one dialog per reason instead of a dozen.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* Use on_error for refused-channel dialog in tunnel_loop
Redirect the refused-channel error through the standard on_error path
instead of calling msgbox directly, for consistency with other errors
in the port-forward flow.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: apply the whole-branch review
Correctness:
- listen(): the Legacy arm is merged with the Claimed arm. On its own it
ignored outcome.local_eof, so a client that hung up during login still
got a target connect, an audit record and a CM row on the controlled
side, and ignored outcome.mux, so a peer upgraded while a legacy window
stayed open answered as a tunnel while the controller went raw.
- Refusal dialogs are deduplicated per quiet spell (10 s) rather than per
tunnel lifetime; the lifetime set went silent for the rest of a
long-lived window after the first burst.
- Android's CM listener handles UpdatePortForward; it fell into `_ => {}`.
- relay_socket_to_tunnel reads into one scratch buffer per channel and
sends an exact-size copy. A frame owning its 64 KiB read allocation
pinned it until sent, once per byte on interactive traffic.
Consistency and cleanups:
- The controlled side's refusal text is the raw pipe's wording, RDP
substitution included.
- connection.rs: the PortForwardChannel arm is a one-line hook, the CM
label is pushed from the 1 s tick alone, and the unreachable inner.tx
fall-through is gone.
- The Ready enum is removed; wait_ready() returns Option<Claim>.
- SendCredit::add wakes with notify_one alone.
- on_ui_command() replaces the two ui_receiver handlers in listen().
- TunnelHandle is no longer re-exported (unused-import warning).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a legacy window stays legacy until it is reopened
Review: the merged `Claimed | Legacy` arm gave a legacy window a hot
transition to a tunnel — every accept re-negotiated, and a peer upgraded
while the window stayed open was promoted underneath live connections.
The product does not need a mode switch inside a window's lifetime, and
the transition was extra state-machine surface for nothing: reopening
the window picks up an upgraded peer.
The two arms are separate again. `Claimed` negotiates once and the
peer's answer fixes the window's mode. `Legacy` logs in for every accept
as before, asks for no tunnel — `LoginConfigHandler::port_forward_mux`
carries the request per login, so the raw pipe never has to talk to a
peer that thinks it agreed to multiplex — and ignores what the peer
reports. Both arms keep skipping a local socket that hung up during
login.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* hbb_common: bump to main with rustdesk/hbb_common#594 merged
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* server: admit only INITIAL_WINDOW on a channel before opened
The demultiplexer accepted CHANNEL_WINDOW into a pending channel's
unbounded queue, four times the bound the channel task enforces once
it polls. The window now starts at INITIAL_WINDOW and is widened right
before `opened` advertises the rest.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: a tunnel ends when its window drops the Tunnel
The loop held its own handle and state sender, so once the window
closed nothing was left to stop it: it kept answering TestDelay and the
peer connection, CM row included, lived on until the peer went away.
`Tunnel` now owns a watch sender nobody sends on; the loop's receiver
errors when the last `Tunnel` drops, and the loop ends.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: one tunnel per mapping, bound to the authenticated target
The login latches `PortForward.host`/`port` into the session scope and
approval is shown that target, but a window-wide tunnel let any later
`open` name another target with only `enable-tunnel` rechecked. A
tunnel now belongs to one listener and serves the one target its login
authenticated: the controlled side refuses an `open` for any other
target, and a window with several targets uses one connection each,
approved on its own.
With one owner per tunnel the claim needs no waiters: `Establishing`,
`Claim::Wait` and `wait_ready` go, and `try_claim` becomes a plain
read. The CM label that followed a tunnel's targets goes with them; a
row shows its mapping's target, as before.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the legacy comment names the mapping, not the window
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: a window violation drops the channel on the spot
Both demultiplexers only queued a `Violation` and left the entry until
the channel task woke and exited, so a peer that kept sending past the
window queued one more entry per frame in the meantime, bounded by
nothing. The entry now goes the moment `accept` fails; later frames for
that id are unknown-channel noise.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the login's target travels with the accept, not the handler
`listen()` wrote `lc.port_forward` (and, on this branch, `port_forward_mux`)
into the window's shared `LoginConfigHandler` before connecting, and
`create_login_msg` read them back only when the peer's `Hash` arrived.
Two mappings logging in at the same time could therefore swap targets:
on master that bridged a local socket to the wrong target, and with a
tunnel bound to its login's target it also left the mapping refusing
every later accept until it was recreated.
The target is now a `PortForward` carried by the interface clone that
handles one accept, passed explicitly down to `create_login_msg`; the
handler no longer has a field to race on. No lock spans the login.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port_forward_mux: pin permission revocation and whole-tunnel failure in tests
Both already hold; the review asked for them to be stated. `enable-tunnel`
turned off mid-session refuses the next `open` while the live channel
keeps relaying, and a dead tunnel ends every channel on it together,
after which the next accept establishes again on the same `Tunnel`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the legacy comment names re-adding the mapping only
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the raw pipe runs the code it always ran
The multiplexed login had replaced `connect_and_login`, so a mapping
with the setting off, a peer without the feature, or a listener latched
`Legacy` still went through the tunnel's state machine, the capped
pre-read and the changed local-EOF rule. Feature off now means the old
code: `listen()` keeps its accept arm and `connect_and_login` as they
were, and the tunnel is a branch taken only when the setting is on, in
`establish_tunnel` with its own `connect_and_login_mux`. The one line
the raw path does differently is the target riding with the accept's
interface clone instead of the shared handler.
`get_port_forward_mux_enabled` had one caller and moves in here, so
`common.rs` is untouched.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a UI login answers the challenge its own connection was given
`handle_login_from_ui` hashed the typed password against `lc.hash`, the
window's shared handler field, and the window's password prompt is
broadcast to every listener. With two mappings both waiting on that
prompt, the `Hash` that arrived last had overwritten the other's, so
one of the two answered the wrong challenge and failed to log in.
Master shares the same state and broadcasts the same way.
The `Hash` is now a parameter of the login; `Session` keeps it beside
the connection it belongs to, and the per-accept clone that
`with_port_forward` makes gets a slot of its own. `lc.hash` stays for
`handle_peer_info`, which only needs the salt, and that is per peer.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a mapping without its hash waits for it before answering the prompt
The window's password prompt is broadcast to every mapping, and can
reach one whose own connection has not received its `Hash` yet. That
mapping used to answer anyway, with a digest over an empty challenge:
the peer refused it and counted a failed attempt, and the empty-salt
result was written into the shared `lc.password`, where the mapping that
prompted had just stored the right one and the next `handle_peer_info`
would persist whatever was there.
The connection's challenge is now `Option<Hash>`, `None` until
`handle_hash` runs, and `handle_login_from_ui` sends nothing without it.
The mapping that prompted stores the salted password in the shared
handler, and the waiting one logs in with that against its own challenge
when its `Hash` arrives, without prompting again.
Test: A answers its prompt, the same broadcast reaches B before its
hash, B sends nothing, B's hash arrives and its login carries B's
challenge and B's target with no dialog. It runs the real `handle_hash`
for B.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the tunnel's login is the raw pipe's, asked for by a window flag
Master's fix for the shared login slots (#16069) keeps the target and
the challenge in the window's `LoginConfigHandler` and serializes the
mappings' logins with a turn lock, all inside `port_forward.rs`. This
branch had carried a broader shape of the same fix, a `with_port_forward`
on `Interface` and the target and `Hash` as parameters through the login
functions, which every caller had to follow. That is gone: `Interface`,
`Session`, `create_login_msg`, `send_login`, `handle_hash` and
`handle_login_from_ui` are as on master.
What the tunnel needs on top is one bit in the login, `multiplex`. It is
a window flag beside `port_forward` in the handler, set once in `io_loop`
before the window's mappings start, so an accept's claim and its login
read the same value; the setting takes effect for windows opened after
it changes. `connect_and_login_mux` is now master's `connect_and_login`
with the tunnel's three differences and the same `hash_arrived` and
`login_from_ui` calls. The raw pipe is master's, line for line.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* hbb_common: bump to main with rustdesk/hbb_common#595 merged
840c8ec..f94e3fe is that one merge: the five local settings custom
clients could not preset.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the off switch gets a checkbox in Settings → General
`enable-port-forward-mux` was readable only by editing the config file.
It is a local setting of the controlling side, so it sits with the other
outgoing ones, after "Open connection in new tab", with a tooltip saying
what it does.
The two new keys are translated in every language. The three that the
mobile file manager added, "Export", "Export Logs" and "Import Folder",
were empty everywhere but five languages; they are filled in too, and
Korean's "xdp-portal-unavailable" with them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* Urdu: fill the backlog of empty and missing translations
ur.rs had fallen behind: 104 keys carried an empty value and 35 keys the
other languages have were absent altogether. Both are filled in, the
missing ones in the order template.rs lists them.
Eight entries stay empty on purpose. They are keys that only ur.rs still
carries, absent from template.rs and from every other language, so their
English source cannot be recovered and nothing reads them:
remember_account_tip, os_account_desk_tip, another_user_login_*_tip,
xorg_not_found_*_tip and no_desktop_*_tip. Twelve more dead keys keep
the values they have; removing either group is a separate decision.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* Urdu: drop the keys template.rs no longer lists
The twenty keys removed here are absent from template.rs and from every
other language file; ur.rs was the only one still carrying them, eight
of them with no value at all. They are leftovers of features that are
gone: the plugin menu, the OS-account login prompts, the Xorg and
no-desktop errors.
ur.rs now holds exactly the template's key set, all of it translated.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: closing the tunnel reaches channels parked on their socket
A channel whose far end neither reads nor writes has both relays parked
on the socket, not on the inbound queue, so `close_all` dropping the
queue's sender woke neither: the socket and both tasks lived on until
the far end hung up. Both sides now hold a per-tunnel teardown signal
that `run_channel` selects on beside its own cancel, and `close_all`
sends it after clearing the map.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a mapping latched to the raw pipe logs in without asking for the tunnel
The login copied the window's `port_forward_mux` into `multiplex`, so a
mapping that had latched to the raw pipe on an old peer kept asking for
the tunnel. Once that peer was upgraded it answered with a tunnel while
the controller switched to raw framing, and every later connection on
the mapping was dead until it was re-added. The login now carries its
own `port_forward_multiplex`, filled with the target under the turn
lock: the probe asks, the raw pipe does not.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a channel opened as its tunnel closes still gets the teardown
`open` can straddle `close_all`: the claim passed, the frame receiver was
still alive, and the channel subscribed after the signal had gone out.
`watch::subscribe` marks earlier sends as seen, and the entry sits in a
map that was already cleared, so nothing would ever end it. The signal is
now a level: `close_all` raises it with `send_replace`, which stores even
with no channel live, and `run_channel` waits for the value rather than
for a change.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: the connect guard counts a live tunnel as connected
`connect_port_forward_if_needed` returned early only for a raw-pipe
socket; called again with a tunnel up it would have built a second
`PortForwardMux` and dropped every channel of the first. Not reachable
today, since the logon response is sent once, but the other checks in
this change already read `is_port_forward()`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* Urdu: the two terminal clipboard keys master added
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a tunnel's TCP stream refuses packets over twice MAX_FRAME
The codec takes a header declaring up to 1 GiB and hands the packet up
only once it has all arrived, so the channel window bounded what the
peer may send, not what this side buffers. Both sides now cap the codec
at 2 * MAX_FRAME as soon as multiplexing is agreed: a data frame with
its envelope and MAC fits with room to spare, and a header over the cap
ends the tunnel before a byte of payload is read. TCP only; the
WebSocket and WebRTC codecs carry caps of their own.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
* port forward: a channel id still live when the counter comes round is skipped
The controller handed out `next_id` unchecked. 2^32 opens later it lands
on a channel still up: the entry here was replaced, while the peer,
which ignores an `open` for a live id, kept routing that id to the old
socket, so the new local connection's bytes went into the old target
connection. The id is now taken under the map's lock and advanced past
any id in use.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
The dropdown beside Connect listed file transfer, camera and terminal
but not port forwarding, so reaching it meant having a card for the
peer. `connect` already takes `isTcpTunneling`; only the menu entry and
the parameter that carries it were missing.
Shown on desktop only. The peer card gates the same entry on `isDesktop`
because `connect` routes a tunnel through the desktop path alone; on web
it would have opened a plain remote session instead.
Claude-Session: https://claude.ai/code/session_01EZ49AbZJYfm8NTp5yDPMab
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* feat(clipboard): optionally sync clipboard between connected sessions
Clipboard content received from a remote session is written to the local
clipboard with an owner marker, so the client clipboard loop deliberately
skips re-broadcasting it to avoid echo loops. As a result, text copied in
one remote window could not be pasted in another connected remote window.
Add an opt-in local option (allow-sync-clipboard-between-sessions) that
relays Clipboard/MultiClipboards messages received from one session to
all other connected sessions, excluding the source session. Per-session
clipboard permissions and view-only mode are still respected via the
existing send path, and the owner marker on the receiving peers prevents
any echo back.
Desktop (flutter) only; file clipboard is not affected.
* fix(lang): propagate sync-clipboard-between-sessions-tip to all locale files
Add the new key to template.rs and every locale file per the localization
convention, move the en.rs entry to the end of the list, and drop comments
that only restated the names next to them.
* fix(lang): add the 'Sync clipboard between sessions' label to the localization catalog
The checkbox label goes through translate(), so add it to template.rs
and every locale file so non-English locales can translate it. en.rs is
skipped since the English display text is identical to the key.
* fix(clipboard): check the source session's full clipboard permission before relaying
The relay was gated only by the incoming clipboard_allowed check
(!disable_clipboard && !view_only). Gate it with
is_text_clipboard_required() instead, which additionally respects the
source session's server_clipboard_enabled and server_keyboard_enabled
state, matching the predicate already applied to destination sessions.
A message arriving after the source permission was revoked (or from a
non-conforming peer) is no longer propagated to other sessions. The
existing local update_clipboard behavior is unchanged.
* fix(lang): translate the new clipboard sync entries in all locale files
Fill the 'Sync clipboard between sessions' label and its tooltip in
every locale file instead of leaving them blank, following each file's
existing terminology. template.rs keeps the empty master entries.
* fix: android: replace all-files access with scoped storage + system picker
Remove MANAGE_EXTERNAL_STORAGE, READ_EXTERNAL_STORAGE, and
WRITE_EXTERNAL_STORAGE from the Android manifest. Remove
requestLegacyExternalStorage. Replace broad external storage with
app-scoped external storage for the file-transfer workspace.
File import uses the system file_picker. File export uses Android's
SAF ACTION_CREATE_DOCUMENT with path validation that restricts
export sources to app-owned directories.
Remove the external_path dependency.
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: android: refine file import feedback
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: android: use SAF for file imports
Replace file_picker imports with Android's Storage Access Framework to avoid legacy storage permissions, stale cached files, and duplicate staging of large imports. Stream selected documents into app-scoped storage with failure-safe replacement, keep exports restricted to validated app storage roots, use filesDir for the internal fallback workspace, and remove legacy permissions contributed during manifest merging.
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: android: keep file imports in the selected directory
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: android: reset projection and constrain file workspace
Release capture resources when media projection is revoked externally. Keep Android local file navigation within the app-scoped workspace.
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: android: handle scoped storage start-up regressions. Allow zero digits in POSIX filenames by rejecting NUL explicitly, and initialise the app-specific home directory before the Android service starts the native server.
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: update content resolver mode to use 'wt' instead of 'w' to prevent trailing bytes from old document whilst reporting sucess
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: android, enforce file workspace boundary on the server, and unblock the ui thread.
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: android: validate rename destinations against the app workspace bound file-operation paths. report rename failures, general import failures, and unregister / reregister projection when its onStop callback fires.
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: reconnect was refreshing the directory with net entry instances, while selected items retained the old instances, it was reporting a selected item, but checkbox statue used object identity, and appeared unchecked. Fixed by reconciling by path and entry type before replacing the directory snapshot, rebinding valid selections, and dropping missing ones.
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix: (android) add SAF folder import and multi item export - import directories using ACTION_OPEN_DOCUMENT_TREE. Export multiple files, logs, and screen recordings via export buttons, add localisation keys for new actions
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
* fix(android): harden scoped storage file handling
- create new SAF documents instead of overwriting export sources
- reject empty peer paths except for home directory reads
- report directory backup restore and cleanup failures
- resolve log export paths from the configured app name
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(android): harden scoped-storage file operations
- snapshot directory exports before writing to the destination
- query document provider metadata off the main thread
- reject invalid remote directories without read timeouts
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(android): handle SAF directory name collisions
- reject dot-segment folder names during import
- fail imports with duplicate document display names
- only reuse matching directories during export
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(android): handle SAF folder import collisions
Reject filesystem-equivalent destination names and
avoid showing a failure when folder overwrite is skipped.
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: michaeljclarkk <104532890+michaeljclarkk@users.noreply.github.com>
Signed-off-by: fufesou <linlong1266@gmail.com>
Co-authored-by: fufesou <linlong1266@gmail.com>
* fix(linux): a session logout should hand the peer to the login screen
Logging out closes every window in the session, the connection manager's
included, and its close handler kicks every peer with the reason a person
gets when they disconnect one by hand. That reason is the one thing the
client never retries on, so the remote session dies on a frozen frame
instead of reconnecting to the greeter that is already there.
The close carries nothing to tell the two apart: measured on KDE, the CM
receives no signal and logind still reports the session active at that
instant, and the server is killed within a few hundred ms either way, so
neither a state check nor a grace period can decide it. What is
distinguishable is the ACTION: disconnecting a peer is not the same event
as this window going away. So the window-close path now says so, and the
server ends the session without poisoning the retry; the Disconnect
button and the app's own close control keep kicking exactly as before.
Linux only, since that is where a logout closes the window.
Verified on plasma/sddm with a client attached: a logout now reconnects
to the greeter with no dialog, while closing the manager window still
shows Closed manually by the peer.
* fix(linux): close the tunnel too, and keep the web build compiling
Three seams the first pass missed. The web bridge is hand written, not
generated, so the new call needs its stub there or flutter build web
stops compiling - and that job is disabled in CI, so it would have gone
green. try_port_forward_loop is a second consumer of the same channel
and only knew Close, so a forwarded tunnel outlived the window it was
supposed to die with. And the variant had landed inside the DRM section,
whose comment says everything below it is drm-gated.
* fix(windows): restore keyboard focus when the cursor re-enters the remote image
On Windows the raw key focus node is unfocused on window blur and nothing
requests it back, so returning to an already connected session left the
keyboard dead until the remote image was clicked.
Request focus from enterView(), gated on the window being active, the tab
being selected and no blocking overlay, so a background window cannot grab
system keys. enterOrLeave(true) is still driven by RawKeyFocusScope's
onFocusChange, so it is not called twice.
* fix(windows): refocus on window focus when the cursor already hovers the image
Alt+Tab or a taskbar click returns focus without a PointerEnter, so
enterView() cannot restore the keyboard. Reuse _cursorOverImage, gated
on the selected tab and no blocking overlay.
* refactor(windows): share one focus predicate for every requestFocus path
The relative-mouse-mode restore on window focus could hand remote input
to this page while a blocking dialog was up or the tab was not selected.
* fix(flutter): make Adjust Window reliable across desktop platforms
- Fix incorrect sizing on scaled displays by calculating the target from the
rendered canvas scale and platform-specific window coordinate units.
- Fix adjustments using the wrong monitor by querying the current remote
window's screen, with the main window as fallback.
- Fix stale geometry after fullscreen or maximized transitions by refreshing
metrics before calculating and applying the target frame.
- Fix fullscreen availability checks on Windows and macOS by predicting the
restored window borders and caching each macOS window's pre-fullscreen work area.
- Fix incorrect Linux work areas by handling GNOME Wayland fractional scaling
and caching compositor/X11 work-area measurements when visibleFrame is wrong.
- Prevent unsafe adjustments by rejecting invalid, oversized, or implausibly
small target frames.
- Avoid failures during window teardown by skipping adjustment when the view,
screen, or native window frame is unavailable.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): harden Adjust Window handling
- Use the dynamic Linux resize edge when predicting restored window bounds.
- Treat GNOME fractional-scaling lookup failures as unknown without repeating
the lookup for the remote window.
- Stop adjustment safely when native window calls fail during window teardown.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): correct Linux monitor selection
Update window_size to use monitor height for vertical bounds, preventing incorrect screen selection with vertically stacked displays.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* docs(flutter): simplify Linux screen handling comments
Keep the source rationale concise and move platform measurements and investigation details out of the implementation.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): align Adjust Window resize padding
Use the shared drag-to-resize padding for Linux restored-window predictions so menu validation matches the applied frame dimensions.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): remove Adjust Window screen fallback
Return null when the current window screen is unavailable instead of using the main window's scale factor and work area.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(linux): query Mutter monitor layout mode
Use DisplayConfig.GetCurrentState instead of inferring scaling from
experimental features, and handle Ubuntu's UI-scaled logical mode.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): use native maximized state for Wayland cache
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): allow Adjust Window to fill work area
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): avoid racing screen info updates
Signed-off-by: 21pages <sunboeasy@gmail.com>
* refactor(flutter): remove dead Adjust Window web plumbing
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): tolerate near-unity Wayland scale factors
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): harden window screen detection
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(linux): drop deprecated GNOME session detection
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(flutter): remove GNOME monitor layout mode flutter cache
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
The CursorData constructor copies hotxOrigin into hoty. Latent today:
both consumers call updateGetKey() before reading, and _checkUpdateScale
recomputes hoty from hotyOrigin - but any future read before that call
inherits the x value silently.
* fix: hide the printer settings tab when settings are disabled
The Security and Network tabs already honour `disable-settings`, but the
Printer tab was gated only on `hide-remote-printer-settings`, so custom
clients built with settings disabled still exposed it.
https://github.com/rustdesk/rustdesk-server-pro/issues/1001
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* feat: add hide-general-settings builtin option
Hides the General tab of the settings page. Unlike the other
hide-*-settings options this one is still useful when settings are
disabled, since `disable-settings` does not cover the General tab.
https://github.com/rustdesk/rustdesk-server-pro/issues/1001
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(flutter): dispose the settings PageController and order dispose() correctly
`dispose()` began with `super.dispose()`, so the mixin chain marked the State
defunct before the WidgetsBindingObserver registration and the periodic timer
were released. The `PageController` was never disposed at all: `Get.delete`
only runs `onDelete()` for a `GetLifeCycleBase`, and a plain `ChangeNotifier`
is not one, so every open/close of the Settings tab leaked one controller with
its listener still attached.
Also guard `switch2page` on the `Rx<SettingsTabKey>` registration it actually
reads rather than only the `PageController` — now that both are really
deleted, a partial teardown would throw into the catch and silently open the
wrong tab — and re-check `mounted` after the await in the `_videoConnTimer`
tick, which `Timer::cancel` cannot stop once the body has started.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* refact: finish the plugin-framework removal sweep
#15854 removed the feature but stopped short of its leftovers:
- `Uninstall`, `Enable`, `Disable`, `Options` and `Please install plugins`
were consumed only by the deleted `flutter/lib/plugin/**`; drop them from
template.rs and the 50 locale files (250 dead entries). `Update` and
`Install` stay, still used by desktop_home_page.dart.
- The server no longer sends `PrvOnFailedPlugin`, and the client no longer
offers to install plugins when privacy mode fails to turn on.
- Drop the MSI `F_Client_Plugins` / `F_Server_Plugins` localization strings;
no `.wxs` references them.
- `_DisplayMenu`'s constructor became a pure pass-through once `pluginItem`
was removed, and the cfg inside `handle_input` repeats the one on the
function itself.
- Normalize `src/lang/sl.rs` to 0644, the only executable file under src/.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(client): handle legacy privacy mode plugin failures
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-authored-by: fufesou <linlong1266@gmail.com>
Remove scrollback lines through the index-aware buffer operation so
deleted anchors are detached and retained lines are reindexed.
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(terminal): send SGR mouse wheel reports with the button codes apps expect
xterm.dart 4.0.0 encodes the wheel buttons as 64+4..64+7 rather than
64+0..64+3, so the low bits land on the modifier field and every wheel
report the terminal emits reads as wheel-with-Shift. Strict full-screen
applications reject the modified event, which is why neither the mouse
wheel nor the trackpad scrolls anything once the peer application takes
over the alternate screen.
Install a mouse handler that keeps every upstream reporting decision and
only re-encodes the wheel buttons as 64..67. Non-wheel reports pass
through untouched, and the emitted bytes stay identical once upstream
ships the same fix, so this can be dropped without a behavior change.
Upstream: TerminalStudio/xterm.dart#238
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(terminal): correct the wheel report row, drop the wasted report build
Address review feedback on the wheel button fix:
- The X10/utf row was encoded as `32 + y + 1` while y is already 1-based, so
every normal-mode report pointed one row too low and the `y > limit` guard
disagreed with what it emitted.
- Gate the wheel path on `mouseMode.reportScroll` and the button state instead
of building and discarding a full report string from `defaultMouseHandler`
on every scroll tick. This also makes the hardcoded SGR 'M' provably right,
since a wheel release now returns before the report is built.
- Derive the wire code as `id - 4` and drop `_wheelButtonId`, whose `default`
branch was unreachable and defeated enum exhaustiveness.
- Assign `mouseHandler` after construction so the `Terminal(...)` line stays
untouched.
Cover the utf, urxvt, null-byte overflow and click-only branches, and assert
that TerminalModel actually installs the handler.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* feat(web): zero-readback WebCodecs video path
Decoded VideoFrames from js/src/webcodecs.js are handed to Flutter via
window.onVideoFrame and imported GPU-side with createImageFromTextureSource;
any failure unregisters the hook so the JS side falls back to RGBA readback.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(web): load bundled terminal font when Google CDNs are unreachable
In air-gapped deployments GoogleFonts.robotoMono() cannot download the
terminal font; when index.html signals offline mode, load the copy bundled
with the web app under the family name google_fonts registers.
Part of the fix for rustdesk/rustdesk-server-pro#996.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci: bump windows arm64 to Flutter 3.44.8, add web build patch script
apply_flutter_3.44_web_patches.sh prepares a 3.44.x web build on top of the
shared source patches: qr_code_scanner's web impl needs dart:ui_web for the
removed platformViewRegistry, and flutter/web/fonts is refreshed to the font
paths the 3.44 engine requests. The disabled build-rustdesk-web job runs it
automatically once FLUTTER_VERSION moves to 3.44.x, and version-guarded
'Patch flutter' steps no longer fail when the guard does not match.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(web): prevent stale WebCodecs frames across sessions
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(web): harden WebCodecs reconnect and Flutter 3.44 patches
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(ci): harden Flutter 3.44 patch input validation
Validate required files before checking patch state,
parameterize the theme-range validator, and prevent
missing inputs from satisfying NO_MATCHES checks.
Signed-off-by: fufesou <linlong1266@gmail.com>
* Remove unused code
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(web): retry font loading and dispose stale decoded images
Signed-off-by: fufesou <linlong1266@gmail.com>
* remove unused code
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(web): Bad state: RenderBox was not laid out
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: fufesou <linlong1266@gmail.com>
* fix(flutter): show error and retry when fetching login options fails
The third-party login section of the login dialog was silently hidden
whenever /api/login-options could not be fetched (e.g. TLS handshake
aborted by a router/ISP scam filter, discussion #15700), leaving users
staring at a dialog with no feedback. The pure-Dart HTTP path also had
no timeout, so a black-holed connection could hang indefinitely.
- let transport errors propagate from queryOidcLoginOptions instead of
swallowing them; a non-JSON response still means "no third-party
login" so self-hosted servers without this API keep the old behavior
- show network_error_tip, a Retry button, and the underlying error in
the login dialog so users and supporters can see what failed
- bound the Dart HTTP branch with a 15s timeout; the Rust branch keeps
its own bounded per-attempt timeouts and is awaited to completion so
a retry never races the URL-keyed ASYNC_HTTP_STATUS entry of an
abandoned in-flight request
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(flutter): surface currentUser refresh failures that were only logged
Non-transport failures of the token auto-login (/api/currentUser) -- a
bad HTTP status, a filter's HTML block page, or an error field in the
body -- were only debugPrinted, so the address book / group tabs showed
nothing and offered no retry. Reuse the existing networkError channel
so netWorkErrorWidget shows the error with its Retry button.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(flutter): keep retry row visible with progress while refetching login options
Review follow-ups: clicking Retry used to clear the error and hide the
row with no pending feedback, which could read as a dead click while
the Rust fallback chain runs; keep the row, disable the button, and
show the usual LinearProgressIndicator instead. Also raise the Dart
HTTP branch timeout to 30s so large web address book pulls on slow
links do not newly time out; it still bounds the previously unbounded
hang and stays above the Rust side's 12s per-attempt timeout.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* chore: update webpki-roots to latest Mozilla root store
0.26.9 -> 0.26.11 (now a forwarding shim over 1.x, used by tungstenite)
1.0.4 -> 1.0.9 (used by reqwest / hyper-rustls / hbb_common)
The 0.26.9 line carried its own root snapshot frozen in early 2025, so
the websocket TLS path was building against a stale bundle.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci: weekly workflow to PR webpki-roots root store updates
webpki-roots is a transitive dependency, so dependabot's cargo version
updates would not cover it. A scheduled job runs cargo update for every
webpki-roots instance in each lockfile and opens a PR when the pinned
Mozilla root snapshot is behind, keeping root store changes reviewable
instead of baking them silently into release builds.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(flutter): hide network tip for server-reported currentUser errors
Review follow-up: when /api/currentUser fails with an error the server
itself reported (an error field in a JSON body, or an unexpected
schema), "Please check your network connection" was misleading. Track
whether the surfaced error came from a server response and skip the
network tip for those; FormatException (a non-JSON body such as a
filter's block page) keeps it, since that still indicates a network or
middlebox problem.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(flutter): close timed-out HTTP clients
* fix(flutter): flag server-reported errors at the throw site
Review follow-up (CodeRabbit). Classifying by `e is! FormatException`
mislabeled ambiguous failures: a middlebox block page returning 200
with valid-but-wrong-shape JSON throws a TypeError from fromJson and
was shown without the check-your-network tip, though it is a network
artifact. Set networkErrorFromServer only at the one site that is
certainly server-reported (an error field in the body); every other
failure keeps the network tip plus the raw error text.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* ci: serialize webpki-roots update runs, null-delimit lockfile paths
Review follow-up (CodeRabbit). A manual dispatch overlapping the weekly
cron could have an older run force-push over the newer branch state;
queue runs via a concurrency group without cancel-in-progress. Also
iterate lockfiles with git ls-files -z so a path with spaces cannot be
word-split, and keep the loop failing the step on any cargo error.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(flutter): improve login retry feedback
Use the theme primary color for the Retry button and hide stale
error messages while a retry is in progress.
Signed-off-by: fufesou <linlong1266@gmail.com>
* fix(flutter): surface login option response errors
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: fufesou <linlong1266@gmail.com>
* fix(linux): load librustdesk.so relative to the executable
The runner and the Dart FFI init loaded the core library by bare name,
relying on the runner's $ORIGIN/lib RPATH. Repackaged installs (CachyOS
repo, AUR) can lose that RPATH, making the app fail to start with
"Failed to load librustdesk.so" unless users add the lib directory to
ld.so.conf. Resolve lib/librustdesk.so next to the executable first,
then fall back to the loader search path.
https://github.com/rustdesk/rustdesk/discussions/14407
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(linux): harden bundled librustdesk.so resolution
Address review: bail out when readlink() may have truncated the
executable path, and widen the Dart try block so any failure probing
the bundled library falls back to the loader search path.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* feat(recording): add visibility and service storage options
- support hide-recording-button in Flutter and Sciter
- allow a custom save directory for Windows service recordings
- sanitize peer IDs used in recording filenames
Tested:
- with hide-recording-button=Y and allow-auto-record-outgoing=Y,
outgoing sessions are recorded automatically while the recording button
remains hidden and cannot be stopped from the UI; verified on Flutter
desktop, Sciter, and Android
- windows-service-video-save-directory takes effect when the Windows client
runs as an installed service
- the Windows controlling side can save recordings for direct IP:port
connections
Signed-off-by: 21pages <sunboeasy@gmail.com>
* update hbb_common
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(recording): validate configured save directories
- trim configured recording directory paths
- reject non-absolute paths and fall back to defaults
- warn when a non-empty path is invalid
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix(recording): validate configured save directories
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Fix Adjust Window sizing across DPI and fullscreen transitions
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Use visible screen frame for Adjust Window
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Tolerate floating-point errors in Adjust Window sizing
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Fix review, fix Adjust Window async metric guards
Capture the current screen before awaiting window geometry so one target-frame calculation uses consistent screen metrics.
Return early when adjusting without a context and the Flutter view list is empty, instead of calling views.first after the window or engine may have been torn
down.
Clarify the platform coordinate units used for Adjust Window scaling.
* Fix Adjust Window for maximized Linux windows
Unmaximize Linux remote windows before applying Adjust Window because native setFrame may be ignored while the window is maximized.
* Fix Adjust Window screen refresh guards
Refresh screen metrics before checking Adjust Window availability and again after exiting fullscreen so target-frame calculation uses current window geometry.
Hide Adjust Window on web because resizing relies on desktop window APIs.
* Fix review, handle missing window frame in Adjust Window
Return null when WindowController.getFrame fails so Adjust Window availability checks and resize attempts skip cleanly if the window is hidden or disposed.
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Feature: Restore the last viewed monitor on auto reconnect
Remembers the users last manually selected remote monitor and returns to it after an auto reconnect.
In memory, reconnect only, and bounds checked against the current display count.
It is skipped in "use all my displays" mode.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* Address review on reconnect monitor restore
Avoid a crash if the session closes during a reconnect.
Don't overwrite the remembered monitor on auto restore.
Defer the switch until the view is ready so a monitor with a different size renders correctly.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* Guard all-displays reconnect restore against empty display list
* Harden reconnect monitor restore against races and multi-UI sessions
Cancel a queued restore when the user manually selects a monitor, so a
newer choice is not overridden by a stale pending restore.
Compare the remembered monitor against the reconnect event's display
instead of the stale _pi.currentDisplay, which is intentionally left
unchanged when the peer has multiple sessions.
Add a frame-independent fallback so a multi-UI tab that never receives
the first-image event (its display is filtered to the owning tab) still
restores the remembered monitor.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* Harden reconnect monitor restore: fallback timer, lifecycle, cursor
Follow-up hardening on the auto-reconnect monitor restore:
- Cancel the fallback timer synchronously once this tab owns the restore,
so it can no longer fire while onEvent2UIRgba is awaiting canvas setup
and switch displays before the canvas is ready (the offset the deferred
restore exists to avoid). The multi-UI no-frame fallback stays intact.
- Apply the restore in a finally so a throwing canvas init still runs it
instead of stranding a queued restore with the timer already cancelled.
- Cancel the fallback timer on a manual monitor switch, so a newer user
selection supersedes a queued restore instead of racing it.
- Restore with updateCursorPos: false, matching other programmatic
display switches so an auto-restore does not reposition the cursor.
---------
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* Feature: add monitor-switch buttons to remote toolbars
Add buttons to cycle through the remote displays from the toolbars:
- A main-toolbar button and a minimized-handle button, both using a shared SVG icon with the current monitor number overlaid.
- Two opt-in settings under Settings/Other. The minimized-toolbar option is nested under the main-toolbar option.
- The minimized button only appears once the toolbar is collapsed.
- Cycling does not move the remote cursor, matching the existing in-toolbar monitor buttons.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
* fix: respect individual-window display mode when cycling
In "Show displays as individual windows" mode, route the cycle button through openMonitorInNewTabOrWindow like the monitor selector, so each display keeps its own window instead of repurposing the current one.
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
---------
Signed-off-by: StealUrKill <35749471+StealUrKill@users.noreply.github.com>
